2-channel digital input; 220VDC; 3ms; Extreme; dark greyThis digital input module receives control signals sent from digital field devices (sensors, etc.). The module is a 4-conductor device and allows direct connection of earth-connected sensors. Each input module has a 3.0 ms noise suppression filter. Field and system levels are electrically isolated. When using a grounded CAGE CLAMP ® connection, field power must be reapplied after every seven 750-407/040-000 I/O modules! The module is very suitable for operation in harsh environmental conditions: - wide temperature range - high dielectric strength and EMC resistance - high vibration resistance
2-channel digital input; 220VDC; 3ms; Extreme; dark grey
This digital input module receives control signals sent from digital field devices (sensors, etc.).
The module is a 4-conductor device and allows direct connection of earth-connected sensors.
Each input module has a 3.0 ms noise suppression filter.
Field and system levels are electrically isolated.
When using a grounded CAGE CLAMP ® connection, field power must be reapplied after every seven 750-407/040-000 I/O modules!
The module is very suitable for operation in harsh environmental conditions:
- wide temperature range
- high dielectric strength and EMC resistance
- high vibration resistance
Number of digital inputs | 2 |
Total number of channels (module) | 2 |
Sinyal tipi | Voltage |
Type of signal voltage | DC 220 V |
Sensor supply voltage | DC 220 V |
Sensor connection | 2 x (2-conductor, 3-conductor, 4-conductor) |
Input characteristic | high-side switching |
Input filter (digital) | 3ms |
Input current per channel for signal (1) typ. | 1,2mA |
Sinyal gerilimi (0) | −3 … +100 VDC |
Sinyal gerilimi (1) | 160 … 286 VDC |
Datenbreite Eingangsdaten (intern) max. | 2Bit |
System supply voltage | DC 5 V; via data contacts |
Current consumption, system supply (5 V) | 5mA |
Field supply voltage | DC 220 V (-20 … +25 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
Dielektrik dayanımı | AC 2,5 kV/DC 3,5 kV; gemäß EN 60870-2-1 |
Rated surge voltage | 5.0 kV (EN 60870-2-1 / Class VW3); 4.0 kV (UL 508); 4.0 kV (EN 60664-1 / up to 4,000 m above sea level); 2.5 kV (EN 60664-1 / > 4,000 m up to 5,000 m above sea level) |
Indicators | LED (A, E) green: Status DI 1, DI 2 |
Number of incoming power jumper contacts | 3 |
Number of outgoing power jumper contacts | 3 |
Current carrying capacity of the power jumper contacts | 10A |
Aşırı gerilim kategorisi | III |
Kapasite düşüşü | Current via power jumper contacts max.: 10 mA (ambient temperature (operation) < 60 °C), 8 mA (ambient temperature (operation) 60–70 °C) |
Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
Connection type (1) | Inputs/Outputs |
Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
Width | 12 mm / 0.472 inch |
Height | 67,8 mm / 2.669 inch |
DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
Depth | 100 mm / 3.937 inch |
Montaj tipi | DIN 35 ray |
Renk | koyu gri |
Gövde malzemesi | Polycarbonate, polyamide 6.6 |
Ağırlık | 47 |
Uygunluk işareti | CE |
Surrounding air (operating) temperature | -40 … 70 °C |
Surrounding air (storage) temperature | -40 … 85 °C |
Koruma sınıfı | IP20 |
Kirlilik derecesi (5) | 2 (EN 60664-1) |
Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
Montaj pozisyonu | horizontal (standing/lying) or vertical |
Nısbi nem (yoğuşmasız) | 95% |
Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible H2S contaminant concentration at a relative humidity |
10ppm |
Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
Product Group | 15 (Remote I/O) |
SAP´den ambalaj tipi | BOX |
Country of origin | DE |
GTIN | 4050821481911 |
Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.