PROFIBUS DP Fieldbus Coupler; 12MBd; ECO; Light greyThe ECO fieldbus coupler is designed for applications with low-scale I/O requirements. By using only digital process data or a small amount of analog data, all the options offered by the 750 I/O Series are preserved. The coupler has an integrated supply terminal for system voltage. Field power bridge contacts are fed through a separate supply module. At startup, the bus coupler determines the module structure of the node to create the process image in PROFIBUS. To optimize addresses, I/O modules with bit widths less than 8 are grouped into one byte. It is also possible to disable I/O modules and change the node image in accordance with the connected signals without having to change the existing application. The fault diagnosis concept is based on EN 50170. Therefore, modules do not need to be programmed to interpret each manufacturer's diagnostic information. Note:Warning: GSD files required
PROFIBUS DP Fieldbus Coupler; 12MBd; ECO; Light grey
The ECO fieldbus coupler is designed for applications with low-scale I/O requirements. By using only digital process data or a small amount of analog data, all the options offered by the 750 I/O Series are preserved.
The coupler has an integrated supply terminal for system voltage. Field power bridge contacts are fed through a separate supply module.
At startup, the bus coupler determines the module structure of the node to create the process image in PROFIBUS. To optimize addresses, I/O modules with bit widths less than 8 are grouped into one byte.
It is also possible to disable I/O modules and change the node image in accordance with the connected signals without having to change the existing application.
The fault diagnosis concept is based on EN 50170. Therefore, modules do not need to be programmed to interpret each manufacturer's diagnostic information.
Warning: GSD files required
| İletişim | PROFIBUS |
| Number of fieldbus nodes on the master max. | 125 |
| Maks. I/O noktası sayısı | 6 |
| Baud rate | 9,6 kBd … 12 MBd |
| Fieldbus segment length max. | 1200 m |
| Transmission medium | Cu cable acc. to EN 50170 |
| İletim süresi | tip. 1 ms (10 kuplör; kuplör başına 32 dijital I/O, 12 Mbaud) maks. 3,3 ms |
| I/O modülü sayısı (düğüm başına) | 63 |
| Input and output process image (Fieldbus) max. | 32 Byte/32 Byte |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level |
| Current consumption, system supply (5 V) | 350mA |
| Total current for system supply | 650mA |
| Anma yükünde giriş akımı tip. (24 V) | 260mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 80% |
| Standart | EN 50170 |
| Connection technology: communication/fieldbus | PROFIBUS: 1 x D-Sub 9 socket |
| Connection technology: system supply | 4 x CAGE CLAMP® |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Connection type (1) | System supply |
| Tek damarlı boylar | 0,08 … 1,5 mm² / 28 … 16 AWG |
| İnce bükümlü kablolar | 0,08 … 1,5 mm² / 28 … 16 AWG |
| Sıyırma uzunluğu | 5 … 6 mm / 0.2 … 0.24 inch |
| Not (iletken kesiti) | 14 AWG: THHN, THWN |
| Width | 49,5 mm / 1.949 inch |
| Height | 71,9 mm / 2.831 inch |
| DIN rayın üst kenarından yükseklik | 64,7 mm / 2.547 inch |
| Depth | 96,8 mm / 3.811 inch |
| Montaj tipi | DIN 35 ray |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 110,4 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-4, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454422554 |
| Customs Tariff No. | 85176200000 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
