Fieldbus Coupler CANopen; D-Sub; Extreme; dark greyFieldbus Coupler 750-338/040-000 connects the WAGO-I/O-SYSTEM as a slave to the CANopen fieldbus. Data is transmitted using PDOs and SDOs. The fieldbus coupler automatically adjusts to create a local process image that can include analog, digital or custom modules. Analog and special module data are sent in words and/or bytes; Digital data is sent in the form of bits. The local process image is divided into two data regions: received data and data to be sent. Process data can be sent to a control system via the CANopen bus for further processing. Process output data can be sent via the CANopen bus. The data of analog modules is stored in PDOs in the order in which the modules are connected to the coupler. The bits of the digital modules are sent as bytes and are also mapped in PDOs. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte. All entries of the object directory can be mapped as required in the 32 Rx PDO and 32 Tx PDO. The entire input and output process image can be transmitted using SDOs. Spacer modules can be adjusted via software. The module is very suitable for operation in harsh environmental conditions: - remarkably wide temperature range - high dielectric strength and EMC resistance - high vibration resistance Note:Warning: EDS files required
Fieldbus Coupler CANopen; D-Sub; Extreme; dark grey
Fieldbus Coupler 750-338/040-000 connects the WAGO-I/O-SYSTEM as a slave to the CANopen fieldbus. Data is transmitted using PDOs and SDOs.
The fieldbus coupler automatically adjusts to create a local process image that can include analog, digital or custom modules. Analog and special module data are sent in words and/or bytes; Digital data is sent in the form of bits.
The local process image is divided into two data regions: received data and data to be sent. Process data can be sent to a control system via the CANopen bus for further processing. Process output data can be sent via the CANopen bus.
The data of analog modules is stored in PDOs in the order in which the modules are connected to the coupler. The bits of the digital modules are sent as bytes and are also mapped in PDOs. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte.
All entries of the object directory can be mapped as required in the 32 Rx PDO and 32 Tx PDO. The entire input and output process image can be transmitted using SDOs.
Spacer modules can be adjusted via software.
The module is very suitable for operation in harsh environmental conditions:
- remarkably wide temperature range
- high dielectric strength and EMC resistance
- high vibration resistance
Warning: EDS files required
| İletişim | CANopen |
| Number of fieldbus nodes on the master max. | 110 |
| Baud rate | 10 kBd … 1 MBd |
| Fieldbus segment length max. | 1000 m |
| Transmission medium | Shielded Cu cable 3 x 0.25 mm² |
| I/O modülü sayısı (düğüm başına) | 64 |
| Diğer CANopen özellikleri | NMT slave Minimum başlama Değişken PDO eşlemesi Acil durum mesajı Can kurtarma Sanal modüllerin konfigürasyonu |
| PDO sayısı | 32 Tx / 32 Rx |
| SDO sayısı | 2 sunucu SDO |
| COB ID dağılımı | SDO, standart |
| Düğüm ID dağılımı | DIP anahtarlar |
| İletişim profili | DS-301 V4.1 |
| Aygıt profili | DS 401 V2.0 Uç kontrolü Kenar tetiklemeli PDO´lar Programlanabilir hata tepkisi |
| Input and output process image (Fieldbus) max. | 512 Byte/512 Byte |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection). Specified values for ambient temperatures under laboratory conditions +15 … +35 °C. For −40 … +55 °C: 24 V (−25 … +20 %). For +55 … +70 °C: 24 V (−25 … +10 %). Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple) |
| Current consumption, system supply (5 V) | 350mA |
| Total current for system supply | 1.650mA |
| Field supply voltage | DC 24 V; via power jumper contacts |
| Anma yükünde giriş akımı tip. (24 V) | 500mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 90% |
| Rated surge voltage | 1 kV |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 10A |
| 1´e göre derecelendirme | IEC/EN 60664-1 |
| Connection technology: communication/fieldbus | CANopen: 1 x D-Sub 9 connector |
| Connection technology: field supply | 4 x CAGE CLAMP® |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Connection type (1) | System/field supply |
| Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 50,5 mm / 1.988 inch |
| Height | 71,1 mm / 2.799 inch |
| DIN rayın üst kenarından yükseklik | 63,9 mm / 2.516 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | koyu gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 176,5 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
| Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, EN 50121-4, -5, EN 60255-26 |
| EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821460145 |
| Customs Tariff No. | 85176200000 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
