Fieldbus Coupler CANopen; D-Sub; Light greyThis bus coupler connects the WAGO-I/O-SYSTEM as a slave to the CANopen fieldbus. Module data is transmitted using PDOs and SDOs. The bus coupler can support all bus modules. By automatically adjusting the bus coupler Creates a local process image that can include analog, digital or custom modules. Analog and special module data is sent in words and/or bytes; Digital data is sent in the form of bytes. CANopen allows the process image to be saved to the relevant Master control (PLC, PC or NC). The local process image is divided into two data regions: received data and data to be sent. Process data can be sent via CANopen fieldbus to PLC, PC or NC for further processing and can be retrieved from the field via CANopen. The data of analog modules is displayed in the order in which the modules are connected to the bus coupler. It is stored in PDOs. Bits of digital modules are sent in the form of bytes and are also It is matched in PDOs. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte. All entries of the object dictionary can be mapped in 32 Rx PDO and 32 Tx PDO according to the user's wishes. The entire input and output process image can be transmitted using SDOs. "Spacer modules" can be set via software. Note:Warning: EDS files required
Fieldbus Coupler CANopen; D-Sub; Light grey
This bus coupler connects the WAGO-I/O-SYSTEM as a slave to the CANopen fieldbus.
Module data is transmitted using PDOs and SDOs.
The bus coupler can support all bus modules. By automatically adjusting the bus coupler
Creates a local process image that can include analog, digital or custom modules. Analog and special module
data is sent in words and/or bytes; Digital data is sent in the form of bytes.
CANopen allows the process image to be saved to the relevant Master control (PLC, PC or NC).
The local process image is divided into two data regions: received data and data to be sent.
Process data can be sent via CANopen fieldbus to PLC, PC or NC for further processing
and can be retrieved from the field via CANopen.
The data of analog modules is displayed in the order in which the modules are connected to the bus coupler.
It is stored in PDOs. Bits of digital modules are sent in the form of bytes and are also
It is matched in PDOs. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte.
All entries of the object dictionary can be mapped in 32 Rx PDO and 32 Tx PDO according to the user's wishes.
The entire input and output process image can be transmitted using SDOs.
"Spacer modules" can be set via software.
Warning: EDS files required
| İletişim | CANopen |
| Number of fieldbus nodes on the master max. | 110 |
| Baud rate | 10 kBd … 1 MBd |
| Fieldbus segment length max. | 1000 m |
| Transmission medium | Shielded Cu cable 3 x 0.25 mm² |
| I/O modülü sayısı (düğüm başına) | 64 |
| Diğer CANopen özellikleri | NMT slave Minimum başlama Değişken PDO eşlemesi Acil durum mesajı Can kurtarma Sanal modüllerin konfigürasyonu |
| PDO sayısı | 32 Tx / 32 Rx |
| SDO sayısı | 2 sunucu SDO |
| COB ID dağılımı | SDO, standart |
| Düğüm ID dağılımı | DIP anahtarlar |
| İletişim profili | DS-301 V4.1 |
| Aygıt profili | DS 401 V2.0 Uç kontrolü Kenar tetiklemeli PDO´lar Programlanabilir hata tepkisi |
| Input and output process image (Fieldbus) max. | 512 Byte/512 Byte |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection) |
| Current consumption, system supply (5 V) | 350mA |
| Total current for system supply | 1.650mA |
| Field supply voltage | DC 24 V (-25 … +30 %); via power jumper contacts |
| Anma yükünde giriş akımı tip. (24 V) | 500mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 87% |
| İzolasyon | 500 V sistem/besleme |
| Number of outgoing power jumper contacts | 3 |
| Current carrying capacity of the power jumper contacts | 10A |
| Connection technology: communication/fieldbus | CANopen: 1 x D-Sub 9 connector |
| Connection technology: field supply | 6 x CAGE CLAMP® |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Connection type (1) | System/field supply |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 50,5 mm / 1.988 inch |
| Height | 71,1 mm / 2.799 inch |
| DIN rayın üst kenarından yükseklik | 63,9 mm / 2.516 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 177 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-4, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454526948 |
| Customs Tariff No. | 85176200000 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
