PROFIBUS DP Fieldbus Coupler; 2nd generation; 12MBd; Extreme; dark greyThe 750-333 Fieldbus Coupler couples peripheral data of all I/O modules of the WAGO-I/O-SYSTEM in PROFIBUS DP. When starting, the coupler determines the module structure of the node and creates a process image of all inputs and outputs. To optimize addresses, I/O modules with bit widths less than 8 are grouped into one byte. It is also possible to disable I/O modules and change the node image in accordance with the connected signals without having to change the existing application. The diagnostic concept is based on identity and channel-related diagnostics in accordance with EN 50170. This eliminates the need to program modules to evaluate manufacturer-specific diagnostic data. The module is very suitable for operation in harsh environmental conditions: - remarkably wide temperature range - high dielectric strength and EMC resistance - high vibration resistance Note:Warning: GSD files required
PROFIBUS DP Fieldbus Coupler; 2nd generation; 12MBd; Extreme; dark grey
The 750-333 Fieldbus Coupler couples peripheral data of all I/O modules of the WAGO-I/O-SYSTEM in PROFIBUS DP.
When starting, the coupler determines the module structure of the node and creates a process image of all inputs and outputs. To optimize addresses, I/O modules with bit widths less than 8 are grouped into one byte.
It is also possible to disable I/O modules and change the node image in accordance with the connected signals without having to change the existing application.
The diagnostic concept is based on identity and channel-related diagnostics in accordance with EN 50170. This eliminates the need to program modules to evaluate manufacturer-specific diagnostic data.
The module is very suitable for operation in harsh environmental conditions:
- remarkably wide temperature range
- high dielectric strength and EMC resistance
- high vibration resistance
Warning: GSD files required
| İletişim | PROFIBUS |
| Number of fieldbus nodes on the master max. | 96 |
| Maks. I/O noktası sayısı | 6 |
| Baud rate | 9,6 kBd … 12 MBd |
| Fieldbus segment length max. | 1200 m |
| Transmission medium | Cu cable acc. to EN 50170 |
| İletim süresi | tip. 1 ms (10 kuplör; kuplör başına 32 dijital I/O, 12 Mbaud) maks. 3,3 ms |
| I/O modülü sayısı (düğüm başına) | 63 |
| Input and output process image (Fieldbus) max. | 244 Byte/244 Byte |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection). Specified values for ambient temperatures under laboratory conditions +15 … +35 °C. For −40 … +55 °C: 24 V (−25 … +20 %). For +55 … +70 °C: 24 V (−25 … +10 %). Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple) |
| Current consumption, system supply (5 V) | 200mA |
| Total current for system supply | 1.800mA |
| Field supply voltage | DC 24 V; via power jumper contacts |
| Anma yükünde giriş akımı tip. (24 V) | 500mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 90% |
| Rated surge voltage | 1 kV |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 10A |
| 1´e göre derecelendirme | IEC/EN 60664-1 |
| Standart | EN 50170 |
| Connection technology: communication/fieldbus | PROFIBUS: 1 x D-Sub 9 socket |
| Connection technology: field supply | 4 x CAGE CLAMP® |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Connection type (1) | System/field supply |
| Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 50,5 mm / 1.988 inch |
| Height | 71,1 mm / 2.799 inch |
| DIN rayın üst kenarından yükseklik | 63,9 mm / 2.516 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | koyu gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 180 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
| Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMU: |
acc. to EN 61000-6-4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821460138 |
| Customs Tariff No. | 85176200000 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
