alt
alt

767-5801
8-channel digital input/output

8-channel digital input/output; 24VDC; 0.5A; 8xM8; - In short: This digital input/output module records binary signals from switches, sensors and proximity switches (BEROs)*. The module also controls actuators such as solenoid valves, DC contactors or indicators. * Does not apply to 767-5801/000-800 Features: 8 digital inputs/outputs, 24 VDC / 0.5 A Input/output can be set by channel-by-channel parameters Fault diagnosis capability (channel-by-channel / module-by-module) Setting with parameters (operating mode, incremental counter, filter, inversion, substitute value strategy, substitute value, manual mode, online simulation and fault diagnosis) Including: 1 x WMB label, orange 1 x label strip 2 x M8 protective cover

8-channel digital input/output; 24VDC; 0.5A; 8xM8; -
In short:

This digital input/output module records binary signals from switches, sensors and proximity switches (BEROs)*. The module also controls actuators such as solenoid valves, DC contactors or indicators.

* Does not apply to 767-5801/000-800

Features:
  • 8 digital inputs/outputs, 24 VDC / 0.5 A
  • Input/output can be set by channel-by-channel parameters
  • Fault diagnosis capability (channel-by-channel / module-by-module)
  • Setting with parameters (operating mode, incremental counter, filter, inversion, substitute value strategy, substitute value, manual mode, online simulation and fault diagnosis)

Including:
  • 1 x WMB label, orange
  • 1 x label strip
  • 2 x M8 protective cover

Number of digital inputs 8
Number of digital outputs 8
Number of digital input/outputs (configurable) 8
Sayaç sayısı 2
Total number of channels (module) 8
Sinyal tipi Voltage
Type of signal voltage DC 24 V
Sayaç tipi Olay/kapı zaman sayacı, pals süresi
Sayma/anahtarlama frekansı 0 Hz ... 1 kHz
Sensor connection 8 x (2-conductor, 3-conductor)
Actuator connection 8 x (2-conductor, 3 Leiter)
Input characteristic high-side switching
Giriş karakteristikleri IEC 61131-2´ye göre tip 2
Input filter (digital) 0,1ms
0,5ms
3ms
15ms
20ms
Giriş filtresi Donanım: ≤ 110 µs Yazılım: Parametreleştirilebilir
Input current per channel for signal (0) max. 2,7mA
Input current per channel for signal (1) typ. 7mA
Input current per channel for signal (1) min. 6,8mA
Input current per channel for signal (1) max. 7,1mA
Output characteristic high-side switching
Output current per channel 0,5A
Çıkış akımı (modül) 4A
Çıkış akımı short-circuit/overload proof
OFF durumda kaçak akım 5µA
Switching frequency max. 500 Hz; Induktive Last
Switching frequency max. (2) 20 Hz; Ohmsche Last
Switching frequency max. (3) 500 Hz; Lampenlast
Yük tipi rezistif, endüktif, lambalar
Sinyal gerilimi (0) −3 … +5 VDC
Sinyal gerilimi (1) 11 … 30 VDC
Switching frequency max. 500Hz
Lastart der Schaltfrequenz Induktive Last
Proses veri genişliği Çalışma moduna bağlıdır
Parametrierbare Funktionen I/O diagnostics (per module): Short circuit/overload of sensor/actuator supply; Undervoltage (ULS + UA)
I/O diagnostics (per channel): Overtemperature
Online simulation (per module): Diagnostics
Online simulation (per channel): Lock/unlock; simulation value: 0/1; Diagnostics
Operating mode (per module): DO module/DI module/DIO module/DIO module + 1 counter/DIO module + 2 counters
Input filter (per channel): 0.1/ 0.5/ 3 /15 /20 ms/ filter off
Inversion (per channel): On/off
Substitute value (per channel): 0/1
Substitute value strategy (per channel): Switch substitute value/hold last value
Manual mode (per channel): On/off
Manual mode value (per channel): 0/1
Koruma VLS + VA için ters gerilim koruması Sensör/aktüatör beslemesi için kısa devre koruması
Çıkış direnci 0,4Ω
System supply voltage )
System and sensor supply voltage DC 24 V(-25 … +30 %); Logik und Sensorik (ULS)
Current consumption: System and sensor 45mA
Stromaufnahme System und Sensor Hinweis nur Logikanteil
Field supply voltage DC 24 V (-25 … +30 %); Aktorik (UA)
Current consumption, field supply (module with no external load) 75mA
İzolasyon 500 V Versorgung/Systembus
Indicators Red LED (F): Error status; Green/red/orange LED (SB): System bus status; Green LED (U<sub>LS</sub>, U<sub>A</sub>): Power supply status; Yellow/red LED (0 … 7): Status/diagnostics DI/DO 1 … DI/DO 8; Non-retentive displays
Current carrying capacity of the supply connections 8A
Connection technology: In-/Outputs 8 x M8 connectors, 3 poles
Connection technology: field supply 1 x M12 plug, 4-pole, A-coded; 1 x Buchse M12, 4-polig, A-kodiert
Connection technology: system supply 1 x M12 socket, 4-pole, A-coded; 1 x Plug M12, 4-pole, A-coded
Connection technology: System bus 1 x Buchse M12, 5-polig, B-kodiert, geschirmt; 1 x Stecker M12, 5-polig, B-kodiert, geschirmt
Anschlussanforderung zulässige Leitungslänge 30m
Connection requirement (permissible cable type) Digital inputs/outputs: unshielded
Width 50 mm / 1.969 inch
Height 35,7 mm / 1.406 inch
Depth 117 mm / 4.606 inch
Gövde malzemesi Polyamide (PA), Makrolon (adres anahtarı kapağı), tutuşma UL94-V0´a göre, halojen/silikon içermez
Ağırlık 251
Uygunluk işareti CE
Dikme Poliüretan (PUR), halojen/silikon içermez
Surrounding air (operating) temperature -25 … 60 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP67
Koruma sınıfı III
Çalışma yüksekliği −1000 … 2000 m; air pressure: 1080 … 795 hPa
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı 5g acc. to IEC 60068-2-6
Darbe direnci Short-term: 50g/11 ms/half-sine per IEC 60068-2-27; Long-term: 30g/6 ms/half-sine per IEC 60068-2-29
EMV-Störfestigkeit acc. to EN 61000-6-2
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-4
Permissible H2S contaminant concentration at a relative humidity 75 % 0,1ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 0,5ppm
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4050821052913
Customs Tariff No. 85389091890

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.