alt
alt

767-5204
MOVILINK® Interface (RS-232, RS-485)

MOVILINK® Interface (RS-232, RS-485); Light grey Short description: Interface module for drive control via MOVILINK ® protocol (see notes). The maximum number of drivers per interface depends on the application type and is described in detail in the manual. Features: 2 MOVILINK ® interfaces (RS-232, RS-485) 4 digital inputs/outputs, 24 VDC / 0.5 A Fault diagnosis capability (channel-by-channel / module-by-module) Setting by parameters (operating mode, baud rate, filter, inversion, substitute value strategy, substitute value, manual mode, online simulation and fault diagnosis) Including: 1 x WMB label, orange 1 x label strip 2 x M12 protective cover note MOVILINK ® SEW-EURODRIVE GmbH & Co. is a registered trademark of KG

MOVILINK® Interface (RS-232, RS-485); Light grey
Short description:

Interface module for drive control via MOVILINK ® protocol (see notes). The maximum number of drivers per interface depends on the application type and is described in detail in the manual.

Features:
  • 2 MOVILINK ® interfaces (RS-232, RS-485)
  • 4 digital inputs/outputs, 24 VDC / 0.5 A
  • Fault diagnosis capability (channel-by-channel / module-by-module)
  • Setting by parameters (operating mode, baud rate, filter, inversion, substitute value strategy, substitute value, manual mode, online simulation and fault diagnosis)

Including:
  • 1 x WMB label, orange
  • 1 x label strip
  • 2 x M12 protective cover

note

MOVILINK ® SEW-EURODRIVE GmbH & Co. is a registered trademark of KG

İletişim MOVILINK® Interface
Number of digital inputs 4
Number of digital outputs 4
Number of digital input/outputs (configurable) 4
Sensor connection 4 x (2-conductor, 3-conductor)
Actuator connection 4 x (2-conductor, 3 Leiter)
Input characteristic high-side switching
Giriş karakteristikleri IEC 61131-2´ye göre tip 2
Giriş filtresi Donanım: ≤ 110 µs Yazılım: Parametreleştirilebilir
Input current per channel for signal (0) max. 2,5mA
Input current per channel for signal (1) typ. 7,3mA
Input current per channel for signal (1) min. 6,4mA
Input current per channel for signal (1) max. 7,5mA
Giriş gerilimi 24 VDC (-3 VDC < UIN < +30 VDC); UA´dan güç şiddetle önerilir, gerilim > UA için kurtarma
Output characteristic high-side switching
Output current per channel 0,5A
Çıkış akımı (modül) 2A
OFF durumda kaçak akım 5µA
Switching frequency max. 20 Hz; Induktive Last
Switching frequency max. (2) 500 Hz; Ohmsche Last
Switching frequency max. (3) 500 Hz; Lampenlast
Çıkış gerilimi ≤ UA
Output protection Short-circuit/overload protection, thermal shutdown
Sinyal gerilimi (0) −3 … +5 VDC
Sinyal gerilimi (1) 11 VDC … UA
Switching frequency max. 20Hz
Lastart der Schaltfrequenz Induktive Last
Baud rate 9,6 kBd … 57,6 kBd
İletim kanalları 1 RxD / 1 TxD (half dupleks)
Proses veri genişliği Arayüz: 10-byte Giriş/Çıkış verisi; DIO: 1-byte Giriş/Çıkış verisi + 1-byte durum
Parametrierbare Funktionen I/O diagnostics (per module): Short circuit/overload of sensor/actuator supply; Undervoltage (ULS + UA)
I/O diagnostics (per channel): Overtemperature
Operating mode (per module): Easy Modus; Mailbox Modus
Operating mode (per channel): RS-232; RS-485
Baud rate (per channel): 9,600 … 57,600 baud
Data bits (per channel): 8
Koruma VLS + VA için ters gerilim koruması Sensör/aktüatör beslemesi için kısa devre koruması
Parite Çift
Stop bitleri 1
Çıkış direnci 0,4Ω
System and sensor supply voltage DC 24 V(-25 … +30 %); Logik und Sensorik (ULS)
Current consumption: System and sensor 75mA
Field supply voltage DC 24 V (-25 … +30 %); Aktorik (UA)
Current consumption, field supply (module with no external load) 25mA
İzolasyon 500 V Versorgung/Systembus
Indicators Red LED (F): Error status; Green/red/orange LED (SB): System bus status; Green LED (U<sub>LS</sub>, U<sub>A</sub>): Power supply status; Yellow/red LED (Ch1.1, Ch2.1): Transmission status; Yellow LED (Ch1.2, Ch2.2): Reception status; Yellow/red LED (0 … 3): Status DI/DO 1 … DI/DO 3; Non-retentive displays
Current carrying capacity of the supply connections 8A
Connection technology: In-/Outputs 2 x M12 connector, A-coded, 5-pole, shielded; 2 x Buchse M12, A-kodiert, 5-polig, geschirmt
Connection technology: field supply 1 x M12 plug, 4-pole, A-coded; 1 x Buchse M12, 4-polig, A-kodiert
Connection technology: system supply 1 x M12 socket, 4-pole, A-coded; 1 x Plug M12, 4-pole, A-coded
Connection technology: System bus 1 x Buchse M12, 5-polig, B-kodiert, geschirmt; 1 x Stecker M12, 5-polig, B-kodiert, geschirmt
Anschlussanforderung zulässige Leitungslänge 15m
Anschlussanforderung zulässige Leitungslänge (2) 200m
Anschlussanforderung zulässige Leitungslänge (3) 30m
Connection requirement (permissible cable type) RS-232
Connection requirement (permissible cable type) (2) RS-485
Connection requirement (permissible cable type) (3) Digital inputs: unshielded
Width 50 mm / 1.969 inch
Height 35,7 mm / 1.406 inch
Depth 117 mm / 4.606 inch
Renk açık gri
Gövde malzemesi Polyamide (PA), Makrolon (adres anahtarı kapağı), tutuşma UL94-V0´a göre, halojen/silikon içermez
Ağırlık 265
Uygunluk işareti CE
Surrounding air (operating) temperature -25 … 60 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP67
Koruma sınıfı III
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı 5g acc. to IEC 60068-2-6
Darbe direnci Short-term: 50g/11 ms/half-sine per IEC 60068-2-27; Long-term: 30g/6 ms/half-sine per IEC 60068-2-29
EMV-Störfestigkeit acc. to EN 61000-6-2
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-4
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4050821643425
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.