Digital input card XI/ON, 24 VDC, 2DI, negative switchingThe XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
Digital input card XI/ON, 24 VDC, 2DI, negative switching
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
| Function | I/O modules |
| Function | Digital input modules |
| Short Description | XN Slice module |
| For use with | 2 Digital inputs, 24 V DC Negative switching |
| Standards | XN-S3T-SBB XN-S3S-SBB XN-S4T-SBBC XN-S4S-SBBC |
| Potential isolation | |
| Ambient temperature >Ambient temperature, operation |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
| Ambient temperature >Storage, transport [ϑ] |
Yes, through optocoupler |
| Relative humidity >Relative humidity |
0 - +55 °C |
| Ambient conditions, mechanical >Degree of Protection |
-25 - +85 °C |
| Ambient conditions, mechanical >Harmful gases |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
| Vibration resistance, operating conditions | IP20 |
| Mechanical shock resistance | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
| Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC/EN 60068-2-6 |
| Drop and topple | according to IEC 60068-2-27 g |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-29 |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Electromagnetic compatibility (EMC) >Burst |
EN 61000-4-2 kV |
| Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-2 V/m |
| Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-4 |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-5 |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 61100-4-6 V |
| Electromagnetic compatibility (EMC) >Type test |
EN 55016-2-3 dB |
| Approvals | EN 61131-2 |
| Other technical data (sheet catalogue) | to EN 61131-2 |
| Channels | CE, cULus |
| Rated voltage through supply terminal [UL ] | Technical Data |
| Rated current consumption from supply terminal [IL ] | |
| Rated current consumption from module bus [IMB ] | 2 Number |
| Heat dissipation | 24 V DC |
| Base modules >without C connection |
20 mA |
| Channels | ≦ 28 mA |
| Rated voltage through supply terminal [UL ] | 0.7 W |
| Rated current consumption from supply terminal [IL ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
| Rated current consumption from module bus [IMB ] | |
| Heat dissipation | 2 Number |
| Base modules >without C connection |
24 V DC |
| Channels | 20 mA |
| Rated voltage through supply terminal [UL ] | ≦ 28 mA |
| Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 0.7 W |
| Rated current consumption from module bus [IMB ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
| Power loss [P] | |
| Base modules >with C connection |
2 Number |
| Channels | 24 V DC |
| Rated voltage through supply terminal [UL ] | 20 mA |
| Rated current consumption from supply terminal [IL ] | ≦ 28 mA |
| Rated current consumption from module bus [IMB ] | Normally 1 W |
| Rated insulation voltage [Ui] | 4-wire XN-S4x-SBBC |
| Heat dissipation | |
| Input voltage >Nominal input voltage [Ue] |
2 Number |
| Input voltage >Low level [UeL] |
24 V DC |
| Input voltage >High level [UeH] |
20 mA |
| Input current >Low level⁄active level [IeL] |
≦ 28 mA |
| Input current >High level⁄active level [IeH] |
500 V AC |
| Input delay >tRising edge |
0.7 W |
| Input delay >tFalling edge |
24 V DC V DC |
| Base modules >without C connection |
-30 V - (UL - 11 V) V |
| Base modules >with C connection |
0 - 5 V V |
| Rated voltage through supply terminal [UL ] | 0 mA - 1.7 mA mA |
| Rated current consumption from supply terminal [IL ] | 1.8 mA - 10 mA mA |
| Rated current consumption from module bus [IMB ] | < 200 µs |
| Power loss [P] | < 200 µs |
| Base modules >without C connection |
2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
| Base modules >with C connection |
4-wire XN-S4x-SBBC |
| Rated voltage through supply terminal [UL ] | |
| Rated current consumption from supply terminal [IL ] | 24 V DC |
| Rated current consumption from module bus [IMB ] | 20 mA |
| Power loss [P] | ≦ 28 mA |
| Channels | Normally 1 W |
| Rated voltage through supply terminal [UL ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
| Rated current consumption from supply terminal [IL ] | 4-wire XN-S4x-SBBC |
| Rated current consumption from module bus [IMB ] | |
| Heat dissipation | 24 V DC |
| Input voltage >Nominal input voltage [Ue] |
20 mA |
| Input voltage >Low level [UeL] |
≦ 28 mA |
| Input voltage >High level [UeH] |
1 W |
| Input current >Low level [IeL] |
|
| Input current >High level [IeH] |
2 Number |
| Rated voltage through supply terminal [UL ] | 24 V DC |
| Rated current consumption from supply terminal [IL ] | 20 mA |
| Rated current consumption from module bus [IMB ] | ≦ 28 mA |
| Power loss [P] | 0.7 W |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | 24 V DC V DC |
| Equipment heat dissipation, current-dependent [Pvid] | -30 V - (UL - 11 V) V |
| Static heat dissipation, non-current-dependent [Pvs] | 0 - 5 V V |
| Heat dissipation capacity [Pdiss] | 0 mA - 1.7 mA mA |
| Operating ambient temperature min. | 1.8 mA - 10 mA mA |
| Operating ambient temperature max. | |
| Degree of Protection | 24 V DC |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
20 mA |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
≦ 28 mA |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Normally 1 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
The supply terminal (UL) supplies power for the card´s electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents. Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
|
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 A |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 W |
| 10.3 Degree of protection of ASSEMBLIES | 0 W |
| 10.4 Clearances and creepage distances | 0.7 W |
| 10.5 Protection against electric shock | 0 W |
| 10.6 Incorporation of switching devices and components | 0 °C |
| 10.7 Internal electrical circuits and connections | +55 °C |
| 10.8 Connections for external conductors | IP20 |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
|
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 60 Hz | Meets the product standard´s requirements. |
| Supply voltage DC | Meets the product standard´s requirements. |
| Voltage type of supply voltage | Meets the product standard´s requirements. |
| Number of digital inputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital inputs configurable | Is the panel builder´s responsibility. |
| Digital outputs configurable | Is the panel builder´s responsibility. |
| Input current at signal 1 | Is the panel builder´s responsibility. |
| Permitted voltage at input | Is the panel builder´s responsibility. |
| Type of voltage (input voltage) | Is the panel builder´s responsibility. |
| Type of digital output | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Output current | Is the panel builder´s responsibility. |
| Permitted voltage at output | Is the panel builder´s responsibility. |
| Type of output voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Short-circuit protection, outputs available | |
| Number of HW-interfaces industrial Ethernet | |
| Number of interfaces PROFINET | 0 - 0 V |
| Number of HW-interfaces RS-232 | 0 - 0 V |
| Number of HW-interfaces RS-422 | 18 - 30 V |
| Number of HW-interfaces RS-485 | DC |
| Number of HW-interfaces serial TTY | 2 |
| Number of HW-interfaces parallel | 0 |
| Number of HW-interfaces Wireless | No |
| Number of HW-interfaces USB | No |
| Number of HW-interfaces other | 1.8 mA |
| With optical interface | 5 - 30 V |
| Supporting protocol for TCP/IP | DC |
| Supporting protocol for PROFIBUS | None |
| Supporting protocol for CAN | 0 A |
| Supporting protocol for INTERBUS | 0 - 0 V |
| Supporting protocol for ASI | DC |
| Supporting protocol for KNX | No |
| Supporting protocol for MODBUS | 0 |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | 0 |
| Supporting protocol for SUCONET | 0 |
| Supporting protocol for LON | 0 |
| Supporting protocol for PROFINET IO | 0 |
| Supporting protocol for PROFINET CBA | 0 |
| Supporting protocol for SERCOS | 0 |
| Supporting protocol for Foundation Fieldbus | 0 |
| Supporting protocol for EtherNet/IP | 1 |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | Yes |
| Supporting protocol for PROFIsafe | Yes |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | Yes |
| Radio standard UMTS | No |
| IO link master | No |
| System accessory | No |
| Degree of protection (IP) | No |
| Type of electric connection | No |
| Time delay at signal exchange | No |
| Fieldbus connection over separate bus coupler possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | Yes |
| SIL according to IEC 61508 | No |
| Performance level acc. EN ISO 13849-1 | No |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | No |
| Explosion safety category for dust | No |
| Width | Yes |
| Height | IP20 |
| Depth | Plug-in connection |
| Product Standards | 0 - 0 ms |
| UL File No. | Yes |
| UL Category Control No. | Yes |
| CSA File No. | No |
| CSA Class No. | No |
| North America Certification | No |
| Specially designed for North America | No |
| Current Limiting Circuit-Breaker | None |
| Degree of Protection | None |
| Link to sheet catalogue | None |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
