I/O expansion, integrated, 24 V DC, 6DI, 4DO(R)I/O expansion via CANopen. Can be used for XC100/200, EC4P, XV-…
I/O expansion, integrated, 24 V DC, 6DI, 4DO(R)
I/O expansion via CANopen. Can be used for XC100/200, EC4P, XV-…
| Product range | Remote I/O systems Compact PLCs |
| Subrange | I/O expansions digital/analog |
| Basic function | Expansions |
| Description | usable via CANopen® |
| Function | CANopen® expansion EC4E |
| Inputs expansion (number) | |
| Real time clock | Digital: 6 |
| Supply voltage | |
| For use with | ✔ |
| For use with | 24 V DC |
| Dimensions (W x H x D) | XC100 XC200 EC4P |
| Weight | XC100/200, EC4P, MFD4 (via CANopen®) |
| Mounting | |
| Solid | 71.5 x 90 x 58 (4 PE) mm |
| Flexible with ferrule | 0.2 kg |
| Standard screwdriver | Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories) |
| Max. tightening torque | |
| Operating ambient temperature | 0.2/4 (AWG 22 - 12) mm2 |
| Condensation | 0.2/2.5 (AWG 22 - 12) mm2 |
| Storage [ϑ] | 0.8 x 3.5 mm |
| Mounting position | 0.6 Nm |
| Overvoltage category/pollution degree | |
| Electrostatic discharge (ESD) >applied standard |
-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C |
| Electrostatic discharge (ESD) >Air discharge |
Take appropriate measures to prevent condensation |
| Electromagnetic fields (RFI) to IEC EN 61000-4-3 | -40 - +70 °C |
| Burst | |
| power pulses (Surge) | Vertical or horizontal |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | |
| Clearance in air and creepage distances | II/2 |
| Insulation resistance | IEC EN 61000-4-2, Level 3 |
| Rated operational voltage [Ue] | 8 kV |
| Permissible range [Ue] | 10 V/m |
| Residual ripple | according to IEC/EN 61000-4-4 kV |
| Input current | 2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5 |
| Voltage dips | 10 V |
| Heat dissipation [P] | |
| CANopen® >Data transfer rate |
EN 50178, UL 508, CSA C22.2, No. 142 |
| CANopen® >Bus termination (first and last station) |
EN 50178 |
| CANopen® >Connection types |
|
| Mode slave >Stations |
24 DC (-15/+20%) V |
| Mode slave >PDO type |
20.4 - 28.8 V DC |
| Mode slave >Control contact rated current |
≦ 5 % |
| Number | 150 mA at Ue at no load |
| Potential isolation | ≤ 20 (IEC/EN 61131-2) ms |
| Rated operational voltage [Ue] | Normally 3.5 W |
| Input voltage | |
| Input current on 1 signal >Input current at signal 1 |
500 kBit/s, 25 m250 kBit/s, 40m125 kBit/s, 125 m50 kBit/s, 300 m20 kBit/s, 700 m10 kBit/s, 1000 m |
| Deceleration time | Via integrated Dip switch |
| Cable length | 2 x terminals (see terminal capacity) |
| Outputs in groups of | max. 62 Number |
| Parallel switching of outputs for increased output | Asynchronous, cyclic, acyclic |
| Protection of an output relay | to DS301V4 |
| Potential isolation | |
| Lifespan, mechanical [Operations] | 6 |
| Contacts >Conventional thermal current (10 A UL) |
from the outputs: yes |
| Contacts >Recommended for load: 12 V AC/DC |
24 V DC |
| Contacts >Short-circuit-proof cos ϕ = 1, characteristic B16 at 600 A |
< 5 (R1 - R6) at signal "0" > 15 (R1 - R6) at signal "1" V DC |
| Contacts >Short-circuit-proof cos ϕ = 0.5 to 0.7, characteristic B16 at 900 A |
3.3 (R1 to R6 (R12)) mA |
| Contacts >Rated impulse withstand voltage Uimp of contact coil |
20 (from “0” to “1”, debounce ON) Normally 0.25 (R1 - R12) (from “0” to “1”, debounce OFF) 20 (from „1“ to „0“) ms |
| Contacts >Rated operational voltage [Ue] |
100 (unshielded) m |
| Rated insulation voltage [Ui] | |
| Safe isolation according to EN 50178 | 1 |
| Breaking capacity >AC-15, 250 V AC, 3 A (600 Ops./h) [Operations] |
Not permissible |
| Breaking capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations] |
Miniature circuit-breaker B16 or fuse 8 A (slow) |
| Filament bulb load >1000 W at 230/240 V AC [Operations] |
from power supply: yes From the inputs: yes to PC interface, memory card, network NET, easyLink Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC |
| Filament bulb load >500 W at 115/120 V AC [Operations] |
10 x 106 |
| Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >With upstream electrical device [Operations] |
6 A |
| Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >Uncompensated [Operations] |
> 500 mA |
| Fluorescent lamp load >Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations] |
16 A |
| Switching frequency >Mechanical operations |
16 A |
| Switching frequency >Switching frequency |
6 kV |
| Switching frequency >Resistive load/lamp load |
250 V AC |
| Switching frequency >Inductive load |
250 V AC |
| UL/CSA >Uninterrupted current at 240 V AC |
300 between coil and contact 300 between two contacts V AC |
| UL/CSA >Uninterrupted current at 24 V DC |
300000 |
| UL/CSA >AC >Control Circuit Rating Codes (utilization category) |
200000 |
| UL/CSA >AC >Max. rated operational voltage |
25000 |
| UL/CSA >AC >max. thermal continuous current cos ϕ = 1 at B 300 |
25000 |
| UL/CSA >AC >max. make/break cos ϕ ≠ capacity 1 at B 300 |
25000 |
| UL/CSA >DC >Control Circuit Rating Codes (utilization category) |
25000 |
| UL/CSA >DC >Max. rated operational voltage |
25000 |
| UL/CSA >DC >Max. thermal uninterrupted current at R 300 |
10 x 106 |
| UL/CSA >DC >Max. make/break capacity at R 300 |
10 Hz |
| Bus termination (first and last station) | 2 Hz |
| Rated operational current for specified heat dissipation [In] | 0.5 Hz |
| Heat dissipation per pole, current-dependent [Pvid] | 10 A |
| Equipment heat dissipation, current-dependent [Pvid] | 8 A |
| Static heat dissipation, non-current-dependent [Pvs] | B 300 Light Pilot Duty |
| Heat dissipation capacity [Pdiss] | 300 V AC |
| Operating ambient temperature min. | 5 A |
| Operating ambient temperature max. | 3600/360 VA |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
R 300 Light Pilot Duty |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
300 V DC |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
1 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
28/28 VA |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Via integrated Dip switch |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 A |
| 10.3 Degree of protection of ASSEMBLIES | 0 W |
| 10.4 Clearances and creepage distances | 0 W |
| 10.5 Protection against electric shock | 3.4 W |
| 10.6 Incorporation of switching devices and components | 0 W |
| 10.7 Internal electrical circuits and connections | -25 °C |
| 10.8 Connections for external conductors | +55 °C |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
|
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 60 Hz | Meets the product standard´s requirements. |
| Supply voltage DC | Meets the product standard´s requirements. |
| Voltage type of supply voltage | Meets the product standard´s requirements. |
| Number of digital inputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital inputs configurable | Is the panel builder´s responsibility. |
| Digital outputs configurable | Is the panel builder´s responsibility. |
| Input current at signal 1 | Is the panel builder´s responsibility. |
| Permitted voltage at input | Is the panel builder´s responsibility. |
| Type of voltage (input voltage) | Is the panel builder´s responsibility. |
| Type of digital output | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Output current | Is the panel builder´s responsibility. |
| Permitted voltage at output | Is the panel builder´s responsibility. |
| Type of output voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Short-circuit protection, outputs available | |
| Redundancy | |
| Type of electric connection | 0 - 0 V |
| Time delay at signal exchange | 0 - 0 V |
| Suitable for safety functions | 20.4 - 28.8 V |
| Category according to EN 954-1 | DC |
| SIL according to IEC 61508 | 6 |
| Performance level acc. EN ISO 13849-1 | 4 |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | 3.3 mA |
| Explosion safety category for dust | 0 - 0 V |
| Width | DC |
| Height | Relay |
| Depth | 8 A |
| North America Certification | 0 - 0 V |
| Specially designed for North America | AC/DC |
| Current Limiting Circuit-Breaker | No |
| Degree of Protection | No |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
