alt
alt

PSG60N24RP
172890 PSG60N24RP
172890

Power supply unit, 1-phase, 100-240VAC/24VDC, 2.5APower supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 32 mm, Height: 120.6 mm, Depth: 119.3 mm, Single-phase, Input voltage range: 85 - 264 V AC, (120 - 375 V DC), Nominal input voltage: 100 - 240 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 2.5 A, Setting range for the output voltage: 22 - 28 V DC, Rated output power: 60 W, Degree of Protection: IP20, Heat dissipation: 9 W

Power supply unit, 1-phase, 100-240VAC/24VDC, 2.5A
Power supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 32 mm, Height: 120.6 mm, Depth: 119.3 mm, Single-phase, Input voltage range: 85 - 264 V AC, (120 - 375 V DC), Nominal input voltage: 100 - 240 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 2.5 A, Setting range for the output voltage: 22 - 28 V DC, Rated output power: 60 W, Degree of Protection: IP20, Heat dissipation: 9 W

Product range Power supplies PSG
Subrange power supply unit
Description Power Boost via 1.5-fold rated operational current for 5 s
PELV (EN 60204), SELV (EN 60950)
Phases Single-phase
Input voltage range 85 - 264 V AC
(120 - 375 V DC)
Nominal input voltage 100 - 240 V AC
Rated output voltage 24 V DC (± 2%)
Rated output current 2.5 A
Setting range for the output voltage 22 - 28 V DC
Rated output power 60 W
Nominal input voltage
Input voltage range 100 - 240 V AC
Supply frequency
>Rated value
85 - 264 V AC
120 - 375 V DC V
Supply frequency
>Range
50/60 Hz
Nominal current [In ] 47 - 63 Hz
Inrush current limitation I²t (+25 °C) 1.5 bei 100 V AC A
Mains buffering at nominal load
>Mains failure bridging
< 40 A at 115 V AC
< 80 A at 230 V AC A
Run-up time after mains voltage applied > 20 at 115 V AC
> 125 at 230 V AC ms
Internal input fuse (device protection, not accessible) < 3000 ms
Back-up fuse T3.15 AH/250 V
Tripping characteristic 6, 10, 16 A (recommended)
Leakage Current B
Short-term interruption < 1 mA at 240 V AC
Rated output power 100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start
Rated output voltage
Tolerance 60 W
Setting range for the output voltage 24 V DC (± 2%)
Nominal current ±2 %
Derating from Tamb > +50 °C 22 - 28 V DC
Capacitive load starting 2,5 A
Heat dissipation > 50 °C (2.5% / °C)

> 70 °C (4% / °C),
Efficiency Max 8000 µF
Residual ripple and switching peaks 9 W
Housing > 86 with 115 V AC

> 87 with 230 V AC %
Status indication < 50 mVpp / < 150 mVpp
MTBF (mean time between failures)
Height Insulated material
Width green LED for "DC OK"
Depth > 800,000 h
Weight 120.6 mm
Terminations 32 mm
Stripping length 119.3 mm
Terminal capacity
>flexible with ferrules/solid
0.33 kg
Tightening torque Screw connection
Ambient air temperature range
>Operation
7 mm
Ambient air temperature range
>Storage, transport [ϑ]
>Storage [ϑ]
0.32 - 5.3 mm² (AWG 22 -10) mm2
damp heat 0.5 Nm
Vibrations (IEC/EN 60068-2-6) -20 - +80 (> 50 °C derating) °C
Mechanical shock resistance (IEC 60068-2-27) -25 - +85 °C
Pollution degree < 95 % relative humidity at +25 °C, no condensation
Climatic class (IEC) 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions
Transient overvoltage protection 30 g (300 m/s²) in all directions
Current limitation at short-circuit 2
Overvoltage protection 3K3 according to EN 60721
Insulation voltage
>Input/Output
Insulation voltage
>Input/PE
Varistor
Insulation voltage
>Output/PE
IÜberstrom = 150 % der max. Ausgangsleistung
Degree of Protection Yes, against internal overvoltage
Protection class 4 kV AC (type test), 3 kV AC (routine test)
Approvals 1.5 kV AC
Static heat dissipation, non-current-dependent [Pvs] 1.5 kV AC
Operating ambient temperature min. IP20
Operating ambient temperature max. Class I with PE connection
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
Equipping power installations with electronic apparatus: EN 50178/IEC 62103
Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950)
Protection against electric shock: DIN 57100-410
CE: according to EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
RoHS-compliant: RoHS Directive 2011/65/EU
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
Industrial: EN 55011
Mains harmonics limitation: EN 601000-3-2
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1
UL508
Class2: UL/c-UL recognized to UL1310 and CSA C22.2 No. 223 |
Component power supply unit for general use: EN61204-3
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
EAC
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
9 W
10.2 Strength of materials and parts
>10.2.5 Lifting
-25 °C
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
+80 °C
10.2 Strength of materials and parts
>10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Meets the product standard´s requirements.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function Is the panel builder´s responsibility.
Voltage type of supply voltage Is the panel builder´s responsibility.
1st secondary output voltage Is the panel builder´s responsibility.
2nd secondary output voltage Is the panel builder´s responsibility.
3rd secondary output voltage Is the panel builder´s responsibility.
Max. output current 1 The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Max. output current 2 Is the panel builder´s responsibility.
Max. output current 3 Is the panel builder´s responsibility.
Secondary voltage adjustable The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Nominal value output voltage 1
Nominal value output voltage 2
Nominal value output voltage 3 AC
Nominal value output current 1 24 - 28 V
Nominal value output current 2 0 - 0 V
Nominal value output current 3 0 - 0 V
Short-circuit-proof 2.5 A
Rated supply voltage at AC 50 Hz 0 A
Rated supply voltage at AC 60 Hz 0 A
Rated supply voltage at DC Yes
Output voltage stabilized 24 V
Power consumption 0 V
Power output 0 V
Stabilized 2.5 A
Type of electric connection 0 A
Rail mounting possible 0 A
Wall mounting possible Yes
Modular version 85 - 264 V
Width in number of modular spacings 85 - 264 V
Built-in width 0 - 0 V
Built-in height Yes
Direct mounting possible 150 VA
Width 60 W
Height Yes
Depth Screw connection
Suitable for safety functions Yes
SIL according to IEC 61508 No
Performance level acc. EN ISO 13849-1 Yes
Degree of protection (IP) 0
Degree of protection (NEMA) 32 mm

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.

Similar Products

DX-EMC12-014-FS1
Eaton
DX-EMC12-019-FS1
Eaton