Power supply unit, 3-phase, 400-500VAC/24VDC, 5APower supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 50 mm, Height: 121 mm, Depth: 117.3 mm, Three-phase, Input voltage range: 320 - 600 V AC, (450 - 800 V DC), Nominal input voltage: 3 x 400 - 500 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 5 A, Setting range for the output voltage: 24 - 28 V DC, Rated output power: 120 W, Degree of Protection: IP20, Heat dissipation: 16.5 W
Power supply unit, 3-phase, 400-500VAC/24VDC, 5A
Power supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 50 mm, Height: 121 mm, Depth: 117.3 mm, Three-phase, Input voltage range: 320 - 600 V AC, (450 - 800 V DC), Nominal input voltage: 3 x 400 - 500 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 5 A, Setting range for the output voltage: 24 - 28 V DC, Rated output power: 120 W, Degree of Protection: IP20, Heat dissipation: 16.5 W
| Product range | Power supplies PSG |
| Subrange | power supply unit |
| Description | Power Boost via 1.5-fold rated operational current for 5 s PELV (EN 60204), SELV (EN 60950) |
| Phases | Three-phase |
| Input voltage range | 320 - 600 V AC (450 - 800 V DC) |
| Nominal input voltage | 3 x 400 - 500 V AC |
| Rated output voltage | 24 V DC (± 2%) |
| Rated output current | 5 A |
| Setting range for the output voltage | 24 - 28 V DC |
| Rated output power | 120 W |
| Nominal input voltage | |
| Input voltage range | 3 x 400 - 500 V AC |
| Supply frequency >Rated value |
3 x 320 - 600 V AC 2 x 360 - 600 V AC 450 - 800 V DC V |
| Supply frequency >Range |
50/60 Hz |
| Nominal current [In ] | 47 - 63 Hz |
| Inrush current limitation I²t (+25 °C) | < 0.5 bei 3 x 400 V AC < 0.4 bei 3 x 500 V AC A |
| Mains buffering at nominal load >Mains failure bridging |
Voltage source up to 3 KVA: < 30 A with 3x 400 V AC & 3x 500 V AC Voltage source up to 18 KVA: < 60 A with 3x 400 V AC & 3x 500 V AC A |
| Run-up time after mains voltage applied | > 20 with 3x 400 V AC >40 with 3x 500 V AC ms |
| Internal input fuse (device protection, not accessible) | < 1000 ms |
| Back-up fuse | T3.15 AH/500 V, 600 V |
| Tripping characteristic | 3 x 6, 10, 16 A (recommended) |
| Leakage Current | B |
| Short-term interruption | < 3.5 mA at 500 V AC |
| DC duty | 100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start |
| Rated output power | L1 +, L2 –, L3 nc, PE ㊏ L1 +, L2 nc, L3 –, PE ㊏ |
| Rated output voltage | |
| Tolerance | 120 W |
| Setting range for the output voltage | 24 V DC (± 2%) |
| Nominal current | ±2 % |
| Derating from Tamb > +50 °C | 24 - 28 V DC |
| Capacitive load starting | 5 A |
| Heat dissipation | Vertical: > 50 °C (2.5% / °C) > 70 °C (5% / °C) Horizontal: > 40 °C (2.5% / °C) > 60 °C (5% / °C) |
| Efficiency | Max 10000 µF |
| Residual ripple and switching peaks | 16.5 W |
| Can be switched in parallel | > 87 with 3 x 400 V AC 86 with 3 x 500 V AC % |
| Housing | < 50 mVpp / < 150 mVpp |
| Status indication | for redundancy, with O ring diode (PSG480R24RM/PSG960R24RM) |
| MTBF (mean time between failures) | |
| Height | Aluminium |
| Width | green LED for "DC OK" |
| Depth | > 500,000 h |
| Weight | 121 mm |
| Terminations | 50 mm |
| Stripping length | 117.3 mm |
| Terminal capacity >flexible with ferrules/solid |
0.66 kg |
| Tightening torque | Screw connection |
| Ambient air temperature range >Operation |
7 mm |
| Ambient air temperature range >Storage, transport [ϑ] >Storage [ϑ] |
Primary side: 0.82 - 3.3 mm² (18 - 12 AWG) Secondary side: 0.82 - 3.3 mm² (18 - 12 AWG) mm2 |
| damp heat | Primary side: 0.9 Secondary side: 0.6 Nm |
| Vibrations (IEC/EN 60068-2-6) | -25 - +80 °C |
| Mechanical shock resistance (IEC 60068-2-27) | -25 - +85 °C |
| Pollution degree | < 95 % relative humidity at +25 °C, no condensation |
| Climatic class (IEC) | 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions |
| Transient overvoltage protection | 30 g (300 m/s²) in all directions |
| Current limitation at short-circuit | 2 |
| Overvoltage protection | 3K3 according to EN 60721 |
| Insulation voltage >Input/Output |
|
| Insulation voltage >Input/PE |
Varistor |
| Insulation voltage >Output/PE |
IÜberstrom = 150 % der max. Ausgangsleistung |
| Degree of Protection | Yes, against internal overvoltage |
| Protection class | 4 kV AC |
| Approvals | 2 kV AC |
| Static heat dissipation, non-current-dependent [Pvs] | 1.5 kV AC |
| Operating ambient temperature min. | IP20 |
| Operating ambient temperature max. | Class I with PE connection |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Electrical equipment of machines: IEC60204-1 (Overvoltage category III) Equipping power installations with electronic apparatus: EN 50178/IEC 62103 Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950) Protection against electric shock: DIN 57100-410 CE: according to EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU RoHS-compliant: RoHS Directive 2011/65/EU ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 Industrial: EN 55011 Mains harmonics limitation: EN 601000-3-2 Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1 UL508 Class2: UL/c-UL recognized to UL1310 and CSA C22.2 No. 223 | Component power supply unit for general use: EN61204-3 |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
EAC |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
16.5 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
-25 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+80 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Voltage type of supply voltage | Is the panel builder´s responsibility. |
| 1st secondary output voltage | Is the panel builder´s responsibility. |
| 2nd secondary output voltage | Is the panel builder´s responsibility. |
| 3rd secondary output voltage | Is the panel builder´s responsibility. |
| Max. output current 1 | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Max. output current 2 | Is the panel builder´s responsibility. |
| Max. output current 3 | Is the panel builder´s responsibility. |
| Secondary voltage adjustable | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Nominal value output voltage 1 | |
| Nominal value output voltage 2 | |
| Nominal value output voltage 3 | AC |
| Nominal value output current 1 | 24 - 28 V |
| Nominal value output current 2 | 0 - 0 V |
| Nominal value output current 3 | 0 - 0 V |
| Short-circuit-proof | 5 A |
| Rated supply voltage at AC 50 Hz | 0 A |
| Rated supply voltage at AC 60 Hz | 0 A |
| Rated supply voltage at DC | Yes |
| Output voltage stabilized | 24 V |
| Power consumption | 0 V |
| Power output | 0 V |
| Stabilized | 5 A |
| Type of electric connection | 0 A |
| Rail mounting possible | 0 A |
| Wall mounting possible | Yes |
| Modular version | 320 - 600 V |
| Width in number of modular spacings | 320 - 600 V |
| Built-in width | 0 - 0 V |
| Built-in height | Yes |
| Direct mounting possible | 200 VA |
| Width | 120 W |
| Height | Yes |
| Depth | Screw connection |
| Suitable for safety functions | Yes |
| SIL according to IEC 61508 | No |
| Performance level acc. EN ISO 13849-1 | Yes |
| Degree of protection (IP) | 0 |
| Degree of protection (NEMA) | 50 mm |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
