Radio interference suppression filter, three-phase, low leakage current, ULN= max. 520 + 10% V, 8 A, For use with: DE1, DE11, DC1, DA1, DG1Radio interference suppression filter, Description: three-phase, low leakage current, Mains voltage (50/60Hz): ULN= max. 520 + 10% V, Rated operational current: Ie= 8 A, For use with: DE1, DE11, DC1, DA1, DG1, Degree of Protection: IP20, Connection type: Screw terminal, PE stud, Notes: Separate mounting, Standards: EN 50178, IEC 61800-3, EN 61800-3 incl. A11
Radio interference suppression filter, three-phase, low leakage current, ULN= max. 520 + 10% V, 8 A, For use with: DE1, DE11, DC1, DA1, DG1
Radio interference suppression filter, Description: three-phase, low leakage current, Mains voltage (50/60Hz): ULN= max. 520 + 10% V, Rated operational current: Ie= 8 A, For use with: DE1, DE11, DC1, DA1, DG1, Degree of Protection: IP20, Connection type: Screw terminal, PE stud, Notes: Separate mounting, Standards: EN 50178, IEC 61800-3, EN 61800-3 incl. A11
| Description | three-phase low leakage current |
| Mains voltage (50/60Hz) [ULN] | max. 520 + 10% V |
| Rated operational current [Ie] | 8 A |
| For use with | DE1 DE11 DC1 DA1 DG1 |
| Degree of Protection | IP20 |
| Connection type | Screw terminal, PE stud |
| Notes | Separate mounting |
| Standards | |
| Environmental conditions >Altitude |
EN 50178, IEC 61800-3, EN 61800-3 incl. A11 |
| Degree of Protection | Up to 2000 m a.s.l.; observe derating at higher altitudes m |
| Short Circuit Current Rating >High fault rating |
IP20 |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | 100 kA |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 8 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 6 W |
| Operating ambient temperature max. | 0 W |
| Degree of Protection | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
-25 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
+50 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
IP20 |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Type of accessory | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Product Standards | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| UL File No. | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| North America Certification | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
