Controller ETHERNET; 3rd generation; SD card slot; Telecontrol technology; Extreme; dark greyIn combination with WAGO-I/O-SYSTEM, the ETHERNET PLC can be used as a programmable controller in ETHERNET networks. The PLC supports all digital, analog and special modules available in the 750/753 Series and is suitable for data rates up to 10/100 Mbit/s. Two ETHERNET interfaces and the integrated switch enable the fieldbus to be wired in the line topology. In this way, the need for additional network devices such as switches or hubs is eliminated. Both interfaces support Auto-Negotiation and Auto-MDI(X). The DIP switch configures the last byte of the IP address and can be used for IP address assignment. The PLC supports both MODBUS/TCP and ETHERNET/IP for use in industrial environments. Supports numerous standard ETHERNET protocols for easy integration into IT environments (e.g. HTTP, BootP, DHCP, DNS, SNTP, SNMP, FTP). For telecontrol applications, the 750-880/040-001 Controller supports IEC 60870-5-101/-103-104, IEC 61850-7 and IEC 61400-25 communication protocols. The integrated Web server provides the user with configuration options and status information from the PFC200. IEC 61131-3 programmable controller features multitasking capability and RTC with battery backup. 1 MB data memory is available. The 750-880 PLC has a slot for a removable memory card, allowing device parameters or files (e.g. boot files) to be transferred from one controller to another. The memory card can be accessed via FTP and used as an additional drive. The module is very suitable for operation in harsh environmental conditions: - remarkably wide temperature range - high dielectric strength and EMC resistance - high vibration resistance
Controller ETHERNET; 3rd generation; SD card slot; Telecontrol technology; Extreme; dark grey
In combination with WAGO-I/O-SYSTEM, the ETHERNET PLC can be used as a programmable controller in ETHERNET networks.
The PLC supports all digital, analog and special modules available in the 750/753 Series and is suitable for data rates up to 10/100 Mbit/s.
Two ETHERNET interfaces and the integrated switch enable the fieldbus to be wired in the line topology. In this way, the need for additional network devices such as switches or hubs is eliminated. Both interfaces support Auto-Negotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and can be used for IP address assignment.
The PLC supports both MODBUS/TCP and ETHERNET/IP for use in industrial environments. Supports numerous standard ETHERNET protocols for easy integration into IT environments (e.g. HTTP, BootP, DHCP, DNS, SNTP, SNMP, FTP).
For telecontrol applications, the 750-880/040-001 Controller supports IEC 60870-5-101/-103-104, IEC 61850-7 and IEC 61400-25 communication protocols.
The integrated Web server provides the user with configuration options and status information from the PFC200.
IEC 61131-3 programmable controller features multitasking capability and RTC with battery backup.
1 MB data memory is available.
The 750-880 PLC has a slot for a removable memory card, allowing device parameters or files (e.g. boot files) to be transferred from one controller to another. The memory card can be accessed via FTP and used as an additional drive.
The module is very suitable for operation in harsh environmental conditions:
| İletişim | EtherNet/IP Modbus TCP Ethernet Telecontrol protocols |
| Protokoller | HTTP BootP DHCP DNS SNTP FTP SNMP |
| Telekontrol protokolleri | IEC 60870-5-101/-103/-104 IEC 61400-25 IEC 61850-7 DNP3 |
| Visualization | Web-Visu |
| CPU | 32 bits |
| Programming languages per IEC 61131-3 | Instruction List (IL) Ladder Diagram (LD) Function Block Diagram (FBD), Continuous Function Chart (CFC) Structured Text (ST) Sequential Function Chart (SFC) |
| Programlama | WAGO-I/O-PRO V2.3 |
| Configuration options | WAGO-I/O-CHECK Web-based management CODESYS Library |
| Baud rate (communication/fieldbus 1) | 10/100 Mbit/s |
| Baud rate | 10/100 Mbit/s |
| Transmission medium (communication/fieldbus) | Twisted Pair S-UTP; 100 Ω; Cat. 5; Line length (max.): 100 m |
| İletim performansı | D Sınıfı, EN 50173´e göre |
| Program memory | 1024 kByte |
| Data memory | 1024 kByte |
| Software non-volatile memory | 32kbyte |
| Hafıza kartı tipi | 32 GB´a kadar SD ve SDHC (Garanti edilen tüm özellikler sadece WAGO 758-879/000-001 hafıza kartı ile geçerlidir.) |
| Memory card slot | Push-push mechanism, sealable cover lid |
| I/O modülü sayısı (düğüm başına) | 64 |
| Input and output process image (Fieldbus) max. | 1020 Worte/1020 Worte |
| Indicators | LED (LINK/ACT) green: Network connection Port 1 … 2; LED (MS, NS) red/green: Status of node, network; LED (I/O, USR) red/green/orange: Internal data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply |
| Kapasite düşüşü | Total current for system supply: 1700 mA (ambient temperature (operation) < 60 °C), 1500 mA (ambient temperature (operation) 60–70 °C) |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection). Specified values for ambient temperatures under laboratory conditions +15 … +35 °C. For −40 … +55 °C: 24 V (−25 … +20 %). For +55 … +70 °C: 24 V (−25 … +10 %). Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple) |
| Anma yükünde giriş akımı tip. (24 V) | 500mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 90% |
| Current consumption, system supply (5 V) | 450mA |
| Total current for system supply | 1.700mA |
| Field supply voltage | DC 24 V; via power jumper contacts |
| Current carrying capacity of the power jumper contacts | 10A |
| Number of outgoing power jumper contacts | 2 |
| 1´e göre derecelendirme | IEC/EN 60664-1 |
| Rated surge voltage | 1 kV |
| Connection technology: communication/fieldbus | EtherNet/IP: 2 x RJ-45; Modbus TCP/UDP: 2 x RJ-45; Telecontrol protocols: 1 x Serial interface via I/O module; Telecontrol protocol IEC 60870-5-104: 1 x RJ-45; Telecontrol protocol IEC 61850: 1 x RJ-45; Telecontrol protocol DNP3: 1 x RJ-45 |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connection technology: field supply | 4 x CAGE CLAMP® |
| Connection type (1) | System/field supply |
| Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Width | 61,5 mm / 2.421 inch |
| Height | 71,9 mm / 2.831 inch |
| DIN rayın üst kenarından yükseklik | 64,7 mm / 2.547 inch |
| Depth | 100 mm / 3.937 inch |
| Ağırlık | 154,5 |
| Renk | koyu gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Montaj tipi | DIN 35 ray |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
| Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821827184 |
| Customs Tariff No. | 85371091990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
