alt
alt

750-880/025-000
Controller ETHERNET

Controller ETHERNET; 3rd generation; SD card slot; Wide. heat; Light greyIn combination with WAGO-I/O-SYSTEM, the ETHERNET PLC is used as a programmable controller in ETHERNET networks. The PLC supports all digital, analog and special modules available in the 750/753 Series and is suitable for data rates up to 10/100 Mbit/s. Two ETHERNET interfaces and the integrated switch enable the fieldbus to be wired in the line topology. In this way, the need for additional network devices such as switches or hubs is eliminated. Both interfaces support Auto-Negotiation and Auto-MDI(X). The DIP switch configures the last byte of the IP address and can be used for IP address assignment. The PLC supports both MODBUS/TCP and ETHERNET/IP for use in industrial environments. Supports numerous standard ETHERNET protocols for easy integration into IT environments (e.g. HTTP, BootP, DHCP, DNS, SNTP, SNMP, FTP). The integrated Web server provides the user with configuration options and status information from the controller. IEC 61131-3 programmable controller features multitasking capability and RTC with battery backup. 1 Mbyte data memory is available. The 750-880 PLC has a slot for a removable memory card, allowing device parameters or files (e.g. boot files) to be transferred from one controller to another. The memory card can be accessed via FTP and used as an additional drive.

Controller ETHERNET; 3rd generation; SD card slot; Wide. heat; Light grey


In combination with WAGO-I/O-SYSTEM, the ETHERNET PLC is used as a programmable controller in ETHERNET networks.

The PLC supports all digital, analog and special modules available in the 750/753 Series and is suitable for data rates up to 10/100 Mbit/s.

Two ETHERNET interfaces and the integrated switch enable the fieldbus to be wired in the line topology. In this way, the need for additional network devices such as switches or hubs is eliminated. Both interfaces support Auto-Negotiation and Auto-MDI(X).

The DIP switch configures the last byte of the IP address and can be used for IP address assignment.

The PLC supports both MODBUS/TCP and ETHERNET/IP for use in industrial environments. Supports numerous standard ETHERNET protocols for easy integration into IT environments (e.g. HTTP, BootP, DHCP, DNS, SNTP, SNMP, FTP).

The integrated Web server provides the user with configuration options and status information from the controller.

IEC 61131-3 programmable controller features multitasking capability and RTC with battery backup.

1 Mbyte data memory is available.

The 750-880 PLC has a slot for a removable memory card, allowing device parameters or files (e.g. boot files) to be transferred from one controller to another. The memory card can be accessed via FTP and used as an additional drive.

İletişim EtherNet/IP
Modbus TCP
Ethernet
Protokoller HTTP
BootP
DHCP
DNS
SNTP
FTP
SNMP
Visualization Web-Visu
CPU 32 bits
Programming languages per IEC 61131-3 Instruction List (IL)
Ladder Diagram (LD)
Function Block Diagram (FBD), Continuous Function Chart (CFC)
Structured Text (ST)
Sequential Function Chart (SFC)
Programlama WAGO-I/O-PRO V2.3
Configuration options WAGO-I/O-CHECK
Web-based management
Baud rate (communication/fieldbus 1) 10/100 Mbit/s
Baud rate 10/100 Mbit/s
Transmission medium (communication/fieldbus) Twisted Pair S-UTP; 100 Ω; Cat. 5; Line length (max.): 100 m
İletim performansı D Sınıfı, EN 50173´e göre
Program memory 1024 kByte
Data memory 1024 kByte
Software non-volatile memory 32kbyte
Hafıza kartı tipi 32 GB´a kadar SD ve SDHC (Garanti edilen tüm özellikler sadece WAGO 758-879/000-001 hafıza kartı ile geçerlidir.)
Memory card slot Push-push mechanism, sealable cover lid
I/O modülü sayısı (düğüm başına) 250
Number of I/O modules without bus extension max. 64
Input and output process image (Fieldbus) max. 1020 Worte/1020 Worte
Indicators LED (LINK/ACT) green: Network connection Port 1 … 2; LED (MS, NS) red/green: Status of node, network; LED (I/O, USR) red/green/orange: Internal data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply
System supply voltage DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection)
Anma yükünde giriş akımı tip. (24 V) 500mA
Nominal yükte güç kaynağı verimi (tip.) (24 V) 90%
Current consumption, system supply (5 V) 450mA
Total current for system supply 1.700mA
Field supply voltage DC 24 V (-25 … +30 %); via power jumper contacts
Current carrying capacity of the power jumper contacts 10A
Number of outgoing power jumper contacts 3
İzolasyon 500 V sistem/besleme
Connection technology: communication/fieldbus EtherNet/IP: 2 x RJ-45; Modbus TCP/UDP: 2 x RJ-45
Connection technology: system supply 2 x CAGE CLAMP®
Connection technology: field supply 6 x CAGE CLAMP®
Connection type (1) System/field supply
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Connection technology: Device configuration 1 x 4-pole male connector
Width 61,5 mm / 2.421 inch
Height 71,9 mm / 2.831 inch
DIN rayın üst kenarından yükseklik 64,7 mm / 2.547 inch
Depth 100 mm / 3.937 inch
Ağırlık 161,4
Renk açık gri
Gövde malzemesi Polycarbonate, polyamide 6.6
Uygunluk işareti CE
Surrounding air (operating) temperature -20 … 60 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m
Nısbi nem (yoğuşmasız) 95%
Relative humidity Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E DIN 40046-721-3, taking a temperature range of −20 … +60 °C into consideration (except wind-driven precipitation, water and ice formation)
Montaj pozisyonu herhangi
Montaj tipi DIN 35 ray
Titreşime dayanıklı 4g per IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, marine applications
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-3, marine applications
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4050821174554
Customs Tariff No. 85371091990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.