Combine with Synthesized Signal Generator DDS and PLL techniques. 500MHz Maximum Frequency. 1ppm High Accuracy, Less Distortion. Dual Independent Outputs. AM, FM, FSK, PSK Modulation. User can set accurate pulse width, burst signal as numbers CHA Frequency Range Sine 1μHz ~ 500MHz Square 1μHz ~ 80MHz Resolution 1μHz (carrier frequency≤80MHz) 1Hz (carrier frequency undefined 80MHz) Accuracy ±1ppm, Frequency≥1.0kHz ±50ppm, Frequency＜1.0kHz Sine Output Level Range Freq≤500MHz -127dBm ~ +13dBm (-127dBm ~ -117dBm typical) Freq≤1000MHz -110dBm ~ +13dBm (-100dBm ~ -110dBm typical) Freq≤1500MHz -105Bm ~ +10dBm (-100dBm ~ -105dBm typical) Resolution 0.1dB Accuracy Freq≤300MHz setting ±1dBm (output level +13dBm~-105dBm) Freq≤1500MHz setting ±1.5dBm (output level +13dBm~-80dBm) setting ±2.5dBm (output level -80dBm~-100dBm) Stationary Wave Ratio (SWR) < 1.8 Sine Spectrum Purity Harmonic < -33dBc (output level≤4dBm,typical value) Non-Harmonic < -40dBc (output level≤4dBm, deviation CF≤5kHz） Sub-Harmonic < -40dBc (output level≤4dBm） Remain Modulating Frequency < 100Hz (BW: 0.3 ~ 3kHz, RMS undefined 120MHz） Square Rise/Fall Edge Time ≤15ns Overshoot ≤5% Modulation Type AM,FM, FSK, PSK External Modulation Input Voltage Range: ± 2.5V, Frequency: DC to 10kHz Frequency Sweep Sweep Rate 1ms ~ 800s Linear (carrier ≤80MHz) 100ms ~ 800s Logrithm (carrier ≤80MHz) Step Time 50ms ~ 10s Linear (carrier undefined 80MHz) Burst Burst Count 1 to 10000 cycles Interval 0.1ms to 800s CHB Frequency Range 1μHz ~ 10MHz Resolution 1μHz Accuracy ±1ppm, Frequency≤1.0kHz ±50ppm, Frequency＜1.0kHz Waveform Type Sine, Square, Ramp, Pulse, Sinc, Exp, Noise, DC Square Edge Time ≤50ns Duty Cycle 0.01% ~ 99.99% Pulse Edge Time ≤50ns Pulse Width 20ns ~ 20s Ramp Symmetry 0.0% ~ 100.0% Output Amplitude 1mVpp to 10Vpp(50Ω), 2mVpp to 20Vpp(High Z) Offset ±5Vpk ac+dc(50Ω), ±10Vpk ac+dc(High Z) Resolution 5mVpp Accuracy ±(1% of setting + 10mVpp) Flatness ± 0.5dB General Characteristics Power AC100V~240V, 50(1±10%)Hz,undefined40VA Dimension & Weight 254×103×374 mm, 4.2 kg
Combine with Synthesized Signal Generator DDS and PLL techniques. 500MHz Maximum Frequency. 1ppm High Accuracy, Less Distortion. Dual Independent Outputs. AM, FM, FSK, PSK Modulation. User can set accurate pulse width, burst signal as numbers
| CHA | ||
| Frequency | ||
| Range | Sine | 1μHz ~ 500MHz |
| Square | 1μHz ~ 80MHz | |
| Resolution |
| 1μHz (carrier frequency≤80MHz) |
| 1Hz (carrier frequency undefined 80MHz) | ||
| Accuracy |
| ±1ppm, Frequency≥1.0kHz |
| ±50ppm, Frequency＜1.0kHz | ||
| Sine Output Level | ||
| Range | Freq≤500MHz | -127dBm ~ +13dBm |
| Freq≤1000MHz | -110dBm ~ +13dBm | |
| Freq≤1500MHz | -105Bm ~ +10dBm | |
| Resolution |
| 0.1dB |
| Accuracy | Freq≤300MHz | setting ±1dBm |
| Freq≤1500MHz | setting ±1.5dBm | |
|
| setting ±2.5dBm | |
| Stationary Wave Ratio (SWR) | < 1.8 | |
| Sine Spectrum Purity | ||
| Harmonic | < -33dBc | |
| Non-Harmonic | < -40dBc | |
| Sub-Harmonic | < -40dBc (output level≤4dBm） | |
| Remain Modulating Frequency | < 100Hz | |
| Square | ||
| Rise/Fall Edge Time | ≤15ns | |
| Overshoot | ≤5% | |
| Modulation | ||
| Type | AM,FM, FSK, PSK | |
| External Modulation Input | Voltage Range: ± 2.5V, Frequency: DC to 10kHz | |
| Frequency Sweep | ||
| Sweep Rate | 1ms ~ 800s Linear (carrier ≤80MHz) | |
| 100ms ~ 800s Logrithm (carrier ≤80MHz) | ||
| Step Time | 50ms ~ 10s Linear (carrier undefined 80MHz) | |
| Burst | ||
| Burst Count | 1 to 10000 cycles | |
| Interval | 0.1ms to 800s | |
| CHB | ||
| Frequency | ||
| Range | 1μHz ~ 10MHz | |
| Resolution | 1μHz | |
| Accuracy | ±1ppm, Frequency≤1.0kHz | |
| ±50ppm, Frequency＜1.0kHz | ||
| Waveform | ||
| Type | Sine, Square, Ramp, Pulse, Sinc, Exp, Noise, DC | |
| Square | Edge Time | ≤50ns |
| Duty Cycle | 0.01% ~ 99.99% | |
| Pulse | Edge Time | ≤50ns |
| Pulse Width | 20ns ~ 20s | |
| Ramp | Symmetry | 0.0% ~ 100.0% |
| Output | ||
| Amplitude | 1mVpp to 10Vpp(50Ω), 2mVpp to 20Vpp(High Z) | |
| Offset | ±5Vpk ac+dc(50Ω), ±10Vpk ac+dc(High Z) | |
| Resolution | 5mVpp | |
| Accuracy | ±(1% of setting + 10mVpp) | |
| Flatness | ± 0.5dB | |
| General Characteristics | ||
| Power | AC100V~240V, 50(1±10%)Hz,undefined40VA | |
| Dimension & Weight | 254×103×374 mm, 4.2 kg | |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
