Eaton : ZEB12-5-GF
136484 ZEB12-5-GF
ZEB12-5-GF /136484
Overload relay, Direct mounting, Earth-fault protection: with, Ir= 1 - 5 A, 1 N/O, 1 N/COverload relay, Product range: Electronic overload relays ZEB, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton, Manual/auto reset selectable, Protection in the case of starting under load (class 10 to class 20), Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILM7, DILM9, DILM12, DILM15, DIULM7, DIULM9, DIULM12, SDAINLM12, SDAINLM16, SDAINLM22, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP20
Overload relay, Direct mounting, Earth-fault protection: with, Ir= 1 - 5 A, 1 N/O, 1 N/C
Overload relay, Product range: Electronic overload relays ZEB, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton, Manual/auto reset selectable, Protection in the case of starting under load (class 10 to class 20), Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILM7, DILM9, DILM12, DILM15, DIULM7, DIULM9, DIULM12, SDAINLM12, SDAINLM16, SDAINLM22, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP20
| Product range | Electronic overload relays ZEB |
| Phase-failure sensitivity | IEC/EN 60947, VDE 0660 Part 102 |
| Description | Test/off button Reset pushbutton Manual/auto reset selectable Protection in the case of starting under load (class 10 to class 20) |
| Mounting type | Direct mounting |
| Earth-fault protection | |
| Trip at approx. | with |
| Overload releases |
> 0.5 x Ir in 2 s > 1.5 x Ir in 1 s |
| Contact sequence | |
| N/O = Normally open | 1 - 5 A |
| N/C = Normally closed | |
| For use with | |
| Explosion protection (according to ATEX 94/9/EC) | 1 N/O |
| EC-prototype test certification | 1 N/C |
| Standards | DILM7 DILM9 DILM12 DILM15 DIULM7 DIULM9 DIULM12 SDAINLM12 SDAINLM16 SDAINLM22 |
| Climatic proofing | |
| Ambient temperature >Open |
II(2)GD [Ex d] [Ex e] [Ex tb] |
| Ambient temperature >Ambient temperature open max. |
SIRA 13 ATEX 9348X |
| Ambient temperature >Enclosed >Ambient temperature enclosed max. |
|
| Mechanical shock resistance | IEC/EN 60947, VDE 0660, UL, CSA |
| Degree of Protection | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Protection against direct contact when actuated from front (EN 50274) | -25 - +65 °C |
| Altitude | 65 °C |
| Rated impulse withstand voltage [Uimp] | 65 °C |
| Overvoltage category/pollution degree | 15 Shock duration 10 ms according to IEC 60068-2-27 g |
| Rated insulation voltage [Ui ] | IP20 |
| Rated operational voltage [Ue] | Finger and back-of-hand proof |
| Rated frequency [f] | Max. 2000 m |
| Safe isolation to EN 61140 >Between auxiliary contacts and main contacts |
|
| Safe isolation to EN 61140 >Between main circuits |
6000 V AC |
| Terminal capacities >Solid |
III/3 |
| Terminal capacities >Solid or stranded |
690 V AC |
| Stripping length | 690 V AC |
| Rated impulse withstand voltage [Uimp] | 50/60 Hz |
| Overvoltage category/pollution degree | 600 V AC |
| Terminal capacities >Solid |
600 V AC |
| Terminal capacities >Flexible with ferrule |
1 x 1.5 - 16 mm2 |
| Terminal capacities >Solid or stranded |
1 x 14 - 4 AWG |
| Terminal screw | 13 mm |
| Tightening torque | |
| Tightening torque | 6000 V |
| Stripping length | III/3 |
| Tools >Pozidriv screwdriver |
2 x (0.75 - 4) mm2 |
| Tools >Standard screwdriver |
2 x (0.75 - 2.5) mm2 |
| Rated insulation voltage [Ui ] | 2 x (18 - 12) AWG |
| Rated operational voltage [Ue ] | M3.5 |
| Safe isolation to EN 61140 >between the auxiliary contacts |
0.8 - 1.2 Nm |
| Conventional thermal current [Ith ] | 7 lb-in |
| Rated operational current [Ie
] >AC-15 >Make contact >120 V [Ie ] |
8 mm |
| Rated operational current [Ie
] >AC-15 >Make contact >220 V 230 V 240 V [Ie ] |
2 Size |
| Rated operational current [Ie
] >AC-15 >Make contact >380 V 400 V 415 V [Ie ] |
1 x 6 mm |
| Rated operational current [Ie
] >AC-15 >Make contact >500 V [Ie ] |
500 V AC |
| Rated operational current [Ie
] >AC-15 >Break contact >120 V [Ie ] |
500 V AC |
| Rated operational current [Ie
] >AC-15 >Break contact >220 V 230 V 240 V [Ie ] |
240 V AC |
| Rated operational current [Ie
] >AC-15 >Break contact >380 V 400 V 415 V [Ie ] |
5 A |
| Rated operational current [Ie
] >AC-15 >Break contact >500 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >24 V [Ie ] |
0.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >60 V [Ie ] |
0.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >110 V [Ie ] |
1.5 A |
| Rated operational current [Ie
] >DC L/R ≦ 15 ms >220 V [Ie ] |
1.5 A |
| Short-circuit rating without welding >max. fuse |
0.9 A |
| Auxiliary contacts >Pilot Duty >AC operated |
0.8 A |
| Auxiliary contacts >Pilot Duty >DC operated |
Switch-on and switch-off conditions based on DC-13, time constant as specified. |
| Short Circuit Current Rating >600 V High Fault >SCCR (fuse) |
0.9 A |
| Short Circuit Current Rating >600 V High Fault >max. Fuse |
0.75 A |
| Rated operational current for specified heat dissipation [In] | 0.4 A |
| Heat dissipation per pole, current-dependent [Pvid] | 0.2 A |
| Equipment heat dissipation, current-dependent [Pvid] | 6 A gG/gL |
| Static heat dissipation, non-current-dependent [Pvs] | |
| Heat dissipation capacity [Pdiss] | B600 |
| Operating ambient temperature min. | R300 |
| Operating ambient temperature max. | 100 kA |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
20 Class J A |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
5 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0.17 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0.51 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
-25 °C |
| 10.3 Degree of protection of ASSEMBLIES | +65 °C |
| 10.4 Clearances and creepage distances | |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Adjustable current range | Does not apply, since the entire switchgear needs to be evaluated. |
| Mounting method | Is the panel builder´s responsibility. |
| Type of electrical connection of main circuit | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as normally closed contact | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as normally open contact | Is the panel builder´s responsibility. |
| Number of auxiliary contacts as change-over contact | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 50HZ | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Rated control supply voltage Us at AC 60HZ | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated control supply voltage Us at DC | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Release class | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Voltage type for actuating | |
| Reset function automatic | |
| Reset function input | 1 - 5 A |
| Reset function push-button | Direct attachment |
| Product Standards | Screw connection |
| UL File No. | 1 |
| UL Category Control No. | 1 |
| CSA File No. | 0 |
| CSA Class No. | 0 - 0 V |
| North America Certification | 0 - 0 V |
| Specially designed for North America | 0 - 0 V |
| Suitable for | Adjustable |
| Max. Voltage Rating | Self powered |
| Degree of Protection | Yes |
| Characteristic curve | No |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
Similar Products
Can't find the product you're looking for?
LET US HELP YOU
Can't Find the Product You're Looking For? Let Us Know, and We'll Source It for You!
Are you searching for products not listed on our website or out of stock? Let us know your requirements, and our expert team will contact you as soon as possible to find the most suitable solution for you.
