alt
alt

XNE-8AI-U/I-4PT/NI
140037 XNE-8AI-U/I-4PT/NI
140037

Analog input card XI/ON ECO, 24 V DC, 8AI(voltage, current)/4(PT, ni, R)The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.

Analog input card XI/ON ECO, 24 V DC, 8AI(voltage, current)/4(PT, ni, R)
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.

Function XI/ON I/O modules
Function XNE Slice module
Short Description 8 Analog input U/I or 4 Analog inputs PT/NI
-10/0 to +10 V DC
0/4 to 20 mA
Acquisition of normalized signals for temperature measurement
Connection of sensor types Pt100, Pt200, Pt500, Pt1000 and Ni100, Ni1000, NI1000TK5000 in 2- or 3-wire circuit
Standards
Potential isolation EN 61000-6-2
EN 61000-6-4
EN 61131-2
Ambient temperature
>Ambient temperature, operation
Yes, through optocoupler
Ambient temperature
>Storage, transport [ϑ]
0 - +55 °C
Relative humidity
>Relative humidity
-25 - +85 °C
Ambient conditions, mechanical
>Degree of Protection
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanical
>Harmful gases
IP20
Vibration resistance, operating conditions SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Mechanical shock resistance according to IEC/EN 60068-2-6
Continuous shock resistance (IEC/EN 60068-2-29) according to IEC 60068-2-27 g
Drop and topple According to IEC 60068-2-29
Electromagnetic compatibility (EMC)
>ESD [Air/contact discharge]
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)
>Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)
>Burst
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)
>Surge
EN 61100-4-4
Electromagnetic compatibility (EMC)
>Radiated RFI
EN 61100-4-5
Electromagnetic compatibility (EMC)
>Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 61100-4-6 V
Electromagnetic compatibility (EMC)
>Voltage fluctuations/voltage dips
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)
>Type test
EN 61131-2
Approvals to EN 61131-2
Other technical data (sheet catalogue) CE, cULus
EAC
Rated data Technical Data
Connection design in TOP direction
Stripping length according to VDE 0611 Part 1/8.92 /

IEC/EN 60947-7-1
Clamping range Push-In spring-cage terminals
Connectable conductors
>"e" solid H07V-U
8 mm
Connectable conductors
>"f" flexible H 07V-K
max. 0.14 - 1.5 mm2
Connectable conductors
>"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors
>"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors
>"e" solid H07V-U
0.25 - 1.5 mm2
Connectable conductors
>"f" flexible H 07V-K
0.25 - 0.75 mm2
Connectable conductors
>"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors
>"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Gauge pin IEC/EN 60947-1 0.25 - 1.5 mm2
Measured variables 0.25 - 0.75 mm2
Channels A1
Rated voltage through supply terminal [UL ]
Rated current consumption from supply terminal [IL ] Voltage, current, temperature (PT, NI), resistance R
Rated current consumption from module bus [IMB ] 8 (U/I), 4 (PT/NI/R) Number
Heat dissipation 24 V DC
Input current 35 mA
Maximum input current ≦ 30 mA
Input voltage < 1.5 W
Maximum input voltage 0/4 - 20 mA
Input impedance 40 (Max. input voltage: < 17 V) mA
Limit frequency (-3 db) -10/0 to +10 V DC
Offset error ± 20 V DC
Basic error limit at 23 °C < 62 Ω/≧ 200 kΩ
Temperature coefficient 1.5 Hz
Measured value representation 0.1 %
Connectable sensors 0.2 %
Temperature range 200 ppm/°C of full-scale value
Diagnostics 16-bit signed integer
12-bit full range, flush left
Standard/extended range/PA (NE43)
Base modules
>without C connection
Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Measured variables Pt: -200 - +850 (-328 - +1562)/-200 - +150 (-328 - +302)
Ni: -60 - +250 (-76 - +482)/-60 - +150 (-76 - +302) °C, (°F)
Channels Yes
Rated voltage through supply terminal [UL ] Already built in
Rated current consumption from supply terminal [IL ]
Rated current consumption from module bus [IMB ] Voltage, current, temperature (PT, NI), resistance R
Heat dissipation 8 (U/I), 4 (PT/NI/R) Number
Offset error 24 V DC
Basic error limit at 23 °C 35 mA
Temperature coefficient ≦ 30 mA
Measured value representation < 1.5 W
Base modules
>without C connection
0.1 %
Channels 0.2 %
Rated voltage through supply terminal [UL ] 200 ppm/°C of full-scale value
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] 16-bit signed integer
12-bit full range, flush left
Standard/extended range/PA (NE43)
Rated current consumption from module bus [IMB ] Already built in
Can be connected
Diagnostics 8 (U/I), 4 (PT/NI/R) Number
Channels 24 V DC
Rated voltage through supply terminal [UL ] 35 mA
Rated current consumption from supply terminal [IL ] ≦ 30 mA
Rated current consumption from module bus [IMB ] Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Heat dissipation Yes
Base modules
>without C connection
Rated voltage through supply terminal [UL ] 8 (U/I), 4 (PT/NI/R) Number
Rated current consumption from supply terminal [IL ] 24 V DC
Rated current consumption from module bus [IMB ] 35 mA
Can be connected ≦ 30 mA
Base modules
>without C connection
< 1.5 W
Rated voltage through supply terminal [UL ] Already built in
Rated current consumption from supply terminal [IL ]
Rated current consumption from module bus [IMB ] 24 V DC
Channels 35 mA
Rated voltage through supply terminal [UL ] ≦ 30 mA
Rated current consumption from supply terminal [IL ] Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Rated current consumption from module bus [IMB ] Already built in
Heat dissipation
Temperature coefficient 24 V DC
Rated voltage through supply terminal [UL ] 35 mA
Rated current consumption from supply terminal [IL ] ≦ 30 mA
Rated current consumption from module bus [IMB ]
Rated operational current for specified heat dissipation [In] 8 (U/I), 4 (PT/NI/R) Number
Heat dissipation per pole, current-dependent [Pvid] 24 V DC
Equipment heat dissipation, current-dependent [Pvid] 35 mA
Static heat dissipation, non-current-dependent [Pvs] ≦ 30 mA
Heat dissipation capacity [Pdiss] < 1.5 W
Operating ambient temperature min.
Operating ambient temperature max. 200 ppm/°C of full-scale value
Degree of Protection
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
24 V DC
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
35 mA
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
≦ 30 mA
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
0 A
10.2 Strength of materials and parts
>10.2.5 Lifting
0 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
1.5 W
10.3 Degree of protection of ASSEMBLIES 0 W
10.4 Clearances and creepage distances 0 °C
10.5 Protection against electric shock +55 °C
10.6 Incorporation of switching devices and components IP20
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Meets the product standard´s requirements.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function Meets the product standard´s requirements.
Supply voltage AC 50 Hz Meets the product standard´s requirements.
Supply voltage AC 60 Hz Meets the product standard´s requirements.
Supply voltage DC Does not apply, since the entire switchgear needs to be evaluated.
Voltage type of supply voltage Does not apply, since the entire switchgear needs to be evaluated.
Input, current Is the panel builder´s responsibility.
Input, voltage Is the panel builder´s responsibility.
Input, resistor Is the panel builder´s responsibility.
Input, resistance thermometer Is the panel builder´s responsibility.
Input, thermocouple Is the panel builder´s responsibility.
Input signal, configurable The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Resolution of the analogue inputs Is the panel builder´s responsibility.
Output, current Is the panel builder´s responsibility.
Output, voltage The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Output signal configurable
Resolution of the analogue outputs
Number of analogue inputs 0 - 0 V
Number of analogue outputs 0 - 0 V
Analogue inputs configurable 20.4 - 28.8 V
Analogue outputs configurable DC
Number of HW-interfaces industrial Ethernet Yes
Number of interfaces PROFINET Yes
Number of HW-interfaces RS-232 Yes
Number of HW-interfaces RS-422 No
Number of HW-interfaces RS-485 No
Number of HW-interfaces serial TTY Yes
Number of HW-interfaces parallel 16 Bit
Number of HW-interfaces Wireless No
Number of HW-interfaces USB No
Number of HW-interfaces other No
Supporting protocol for TCP/IP 0 Bit
Supporting protocol for PROFIBUS 8
Supporting protocol for CAN 0
Supporting protocol for INTERBUS Yes
Supporting protocol for ASI Yes
Supporting protocol for KNX 0
Supporting protocol for MODBUS 0
Supporting protocol for Data-Highway 0
Supporting protocol for DeviceNet 0
Supporting protocol for SUCONET 0
Supporting protocol for LON 0
Supporting protocol for PROFINET IO 0
Supporting protocol for PROFINET CBA 0
Supporting protocol for SERCOS 0
Supporting protocol for Foundation Fieldbus 1
Supporting protocol for EtherNet/IP No
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for DeviceNet Safety No
Supporting protocol for INTERBUS-Safety No
Supporting protocol for PROFIsafe No
Supporting protocol for SafetyBUS p No
Supporting protocol for other bus systems No
Radio standard Bluetooth No
Radio standard WLAN 802.11 No
Radio standard GPRS No
Radio standard GSM No
Radio standard UMTS No
IO link master No
System accessory No
Degree of protection (IP) No
Degree of protection (NEMA) No
Type of electric connection No
Fieldbus connection over separate bus coupler possible No
Rail mounting possible No
Wall mounting/direct mounting No
Front build in possible No
Rack-assembly possible No
Suitable for safety functions No
Category according to EN 954-1 No
SIL according to IEC 61508 No
Performance level acc. EN ISO 13849-1 No
Appendant operation agent (Ex ia) No
Appendant operation agent (Ex ib) No
Explosion safety category for gas Yes
Explosion safety category for dust IP20
Width
Height Screw-/spring clamp connection
Depth Yes
Product Standards Yes
North America Certification No
Specially designed for North America No
Current Limiting Circuit-Breaker No
Degree of Protection No
Link to sheet catalogue

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.

Similar Products

EC4P-221-MTXD1
Eaton
EC4P-221-MTXX1
Eaton
EC4P-221-MRXD1
Eaton
EC4P-221-MRXX1
Eaton
EC4P-221-MTAD1
Eaton
EC4P-221-MTAX1
Eaton
EC4P-221-MRAD1
Eaton
EC4P-221-MRAX1
Eaton
EC4P-222-MTXD1
Eaton
EC4P-222-MTXX1
Eaton
EC4P-222-MRXD1
Eaton