alt
alt

EC4P-221-MRXX1
106394 EC4P-221-MRXX1
106394

Compact PLC, 24 V DC, 12DI(of 4AI), 6 DO(R), CANCompact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Compact PLC, 24 V DC, 12DI(of 4AI), 6 DO(R), CAN
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Description Expandable: Inputs/outputs and bus systems
individual laser inscription possible with EC4-COMBINATION-*
Digital easyNet/CANopen® on board
of which can be used as analog
Relay 10 A (UL) 12
Supply voltage 4
Dimensions (W x H x D)
Weight 6
Mounting 24 V DC
Solid
Flexible with ferrule 107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Standard screwdriver 0.3 kg
Max. tightening torque Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Operating ambient temperature
Condensation 0.2/4 (AWG 22 - 12) mm2
LCD display (clearly legible) 0.2/2.5 (AWG 22 - 12) mm2
Storage [ϑ] 0.8 x 3.5 mm
Relative humidity, non-condensing (IEC/EN 60068-2-30) 0.6 Nm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4) -25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6)
>Constant amplitude 0.15 mm
Take appropriate measures to prevent condensation
Vibrations (IEC/EN 60068-2-6)
>Constant acceleration 2 g
0 - 55 °C
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms -40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height] 5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32) 1080 - 1080 hPa
Mounting position
Overvoltage category/pollution degree IP20
Electrostatic discharge (ESD)
>applied standard
10 - 57 Hz
Electrostatic discharge (ESD)
>Air discharge
57 - 150 Hz
Electrostatic discharge (ESD)
>Contact discharge
18 Impacts
Electromagnetic fields (RFI) to IEC EN 61000-4-3 50 mm
Radio interference suppression 1 m
Burst Vertical or horizontal
Burst
>Supply cable
Burst
>Signal lines
II/2
power pulses (Surge) IEC EN 61000-4-2, Level 3
Immunity to line-conducted interference to (IEC/EN 61000-4-6) 8 kV
Clearance in air and creepage distances 6 kV
Insulation resistance 10 V/m
Back-up of real-time clock EN 55011 Class B, EN 55022 Class B
Accuracy of the real-time clock IEC/EN 61000-4-4, level 3 kV
Write cycles of the retentive memory 2 kV
Rated operational voltage [Ue] 2 kV
Permissible range [Ue] 2 kV (supply cables, symmetrical, EASY...AC)
0.5 kV (supply cables, symmetrical, easy-DC)
according to IEC/EN 61000-4-5
Residual ripple 10 V
Input current
Voltage dips EN 50178, UL 508, CSA C22.2, No. 142
Heat dissipation [P] EN 50178
Processor
Memory
>Program code/data
252U067
Memory
>Marker/retentive data
① Backup time (hours) with fully charged double layer capacitor
② Service life (years)
Cycle time for 1 k of instructions (Bit, Byte) part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232
>Data transfer rate
PRG interface RS232
>Connection types
10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232
>Potential isolation
PRG interface RS232
>Master mode
>Data transfer rate
24 DC (-15/+20%) V
PRG interface RS232
>Master mode
>Character formats
20.4 - 28.8 V DC
PRG interface RS232
>Master mode
>Number of transmission bytes in a block
≦ 5 %
PRG interface RS232
>Master mode
>Number of received bytes in a block
normally 140 mA at Ue
Ethernet
>Data transfer rate
≤ 10
(IEC/EN 61131-2) ms
Ethernet
>Connection types
Normally 3.4 W
Ethernet
>Potential isolation
CANopen®
>Data transfer rate
Infineon XC161
CANopen®
>Bus termination (first and last station)
256/14 segments of 16 KB each kByte
CANopen®
>Connection types
16/4/4/8 KByte
Master mode
>Number
< 0.3 ms
Mode slave
>Stations
Mode slave
>PDO type
4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Mode slave
>Control contact rated current
RJ45-bus
Number none
Inputs can be used as analog inputs 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Status Display 8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Potential isolation 190 bytes
Rated operational voltage [Ue] 190 bytes
Input voltage 10 MBit/s, 100 m Mbit/s
Input current on 1 signal
>Input current at signal 1
RJ45
Deceleration time No
Cable length 500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter
>Number of counter inputs
EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter
>Value range
2 x RJ45, 8 pole
Incremental counter
>Counter frequency
8
Incremental counter
>Pulse shape
max. 126 Number
Incremental counter
>Counter inputs
Asynchronous, cyclic, acyclic
Incremental counter
>Reference input
To DS 301 V4
Incremental counter
>Input for reference switch
Incremental counter
>Counter inputs I1 and I2, I3 and I4
12
Incremental counter
>Signal offset
4 (I7, I8, I11, I12)
Rapid counter inputs
>Number
LCD-Display
Rapid counter inputs
>Value range
from the outputs: yes
to network easyNet, easyLink
Rapid counter inputs
>Cable length
24 V DC
Rapid counter inputs
>Counter frequency
< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0"
> 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Rapid counter inputs
>Pulse shape
3.3 (I1 to I6)
2.2 (I7, I8)
3.3 (I9, I10)
2.2 (I11, I12) mA
Number normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1")
normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Potential isolation 100 (unshielded) m
Input type 1 (I1, I2, I3, I4)
Signal range 32 Bit
Resolution ≦ 40 kHz
Input impedance Square
Accuracy of actual value
>Within a single device
I1, I2
Conversion time, analog/digital I3
Input current I4
Cable length 1
Outputs in groups of 90°
Parallel switching of outputs for increased output 2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Protection of an output relay 16/32 Bit
Potential isolation ≦ 20 (screened) m
Lifespan, mechanical [Operations] ≦ 50 kHz
Contacts
>Conventional thermal current (10 A UL)
Square
Contacts
>Recommended for load: 12 V AC/DC
Contacts
>Short-circuit-proof cos ϕ = 1, characteristic B16 at 600 A
4 (I7, I8, I11, I12)
Contacts
>Short-circuit-proof cos ϕ = 0.5 to 0.7, characteristic B16 at 900 A
from the outputs: yes
to interface/memory card: no
Contacts
>Rated impulse withstand voltage Uimp of contact coil
DC voltage
Contacts
>Rated operational voltage [Ue]
0-10 V DC
Rated insulation voltage [Ui] 0.01 V analog
0.01 V digital
10 Bit (value 0 - 1023)
Safe isolation according to EN 50178 11.2 kΩ
Making capacity
>AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]
± 2, (I7, I8, I11, I12) ± 0.12 V %
Making capacity
>DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]
each CPU cycle ms
Breaking capacity
>AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]
< 1 mA
Breaking capacity
>DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]
≦ 30, screened m
Filament bulb load
>1000 W at 230/240 V AC [Operations]
Filament bulb load
>500 W at 115/120 V AC [Operations]
1
Fluorescent lamp load
>Fluorescent lamp load 10 x 58 W at 230/240 V AC
>With upstream electrical device [Operations]
Not permissible
Fluorescent lamp load
>Fluorescent lamp load 10 x 58 W at 230/240 V AC
>Uncompensated [Operations]
Miniature circuit-breaker B16 or fuse 8 A (slow)
Fluorescent lamp load
>Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]
from power supply: yes
From the inputs: yes
in groups
Safe isolation according to EN 50178: 300 V AC
Basic isolation: 600 V AC
Switching frequency
>Mechanical operations
10 x 106
Switching frequency
>Switching frequency
8 A
Switching frequency
>Resistive load/lamp load
> 500 mA
Switching frequency
>Inductive load
16 A
UL/CSA
>Uninterrupted current at 240 V AC
16 A
UL/CSA
>Uninterrupted current at 24 V DC
6 kV
UL/CSA
>AC
>Control Circuit Rating Codes (utilization category)
250 V AC
UL/CSA
>AC
>Max. rated operational voltage
250 V AC
UL/CSA
>AC
>max. thermal continuous current cos ϕ = 1 at B 300
300 between coil and contact
300 between two contacts V AC
UL/CSA
>AC
>max. make/break cos ϕ ≠ capacity 1 at B 300
300000
UL/CSA
>DC
>Control Circuit Rating Codes (utilization category)
200000
UL/CSA
>DC
>Max. rated operational voltage
300000
UL/CSA
>DC
>Max. thermal uninterrupted current at R 300
200000
UL/CSA
>DC
>Max. make/break capacity at R 300
25000
Bus termination (first and last station) 25000
Rated operational current for specified heat dissipation [In] 25000
Heat dissipation per pole, current-dependent [Pvid] 25000
Equipment heat dissipation, current-dependent [Pvid] 25000
Static heat dissipation, non-current-dependent [Pvs] 10 x 106
Heat dissipation capacity [Pdiss] 10 Hz
Operating ambient temperature min. 2 Hz
Operating ambient temperature max. 0.5 Hz
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
10 A
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
8 A
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
B 300 Light Pilot Duty
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
300 V AC
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
5 A
10.2 Strength of materials and parts
>10.2.5 Lifting
3600/360 VA
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
R 300 Light Pilot Duty
10.2 Strength of materials and parts
>10.2.7 Inscriptions
300 V DC
10.3 Degree of protection of ASSEMBLIES 1 A
10.4 Clearances and creepage distances 28/28 VA
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors 0 A
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
0 W
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
0 W
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
3.4 W
10.10 Temperature rise 0 W
10.11 Short-circuit rating -25 °C
10.12 Electromagnetic compatibility +55 °C
10.13 Mechanical function
Contains function building blocks Meets the product standard´s requirements.
Contains basic device Meets the product standard´s requirements.
Contains module rack Meets the product standard´s requirements.
Contains power supply Meets the product standard´s requirements.
Contains analogue input module Meets the product standard´s requirements.
Contains analogue output module Does not apply, since the entire switchgear needs to be evaluated.
Contains digital input module Does not apply, since the entire switchgear needs to be evaluated.
Contains digital output module Meets the product standard´s requirements.
Contains function module Meets the product standard´s requirements.
Contains technology module Meets the product standard´s requirements.
Contains communication module Does not apply, since the entire switchgear needs to be evaluated.
Contains memory unit Does not apply, since the entire switchgear needs to be evaluated.
Contains simulation module Is the panel builder´s responsibility.
Contains connection cable Is the panel builder´s responsibility.
Contains control unit Is the panel builder´s responsibility.
Contains monitor Is the panel builder´s responsibility.
Contains programming software Is the panel builder´s responsibility.
Contains engineering software The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains visualization Is the panel builder´s responsibility.
Contains libraries Is the panel builder´s responsibility.
Contains documentation The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Contains other components
Software preinstalled
Product Standards Yes
UL File No. Yes
UL Category Control No. No
CSA File No. Yes
CSA Class No. Yes
North America Certification No
Specially designed for North America Yes
Current Limiting Circuit-Breaker Yes
Degree of Protection Yes

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.

Similar Products

EC4P-221-MTXD1
Eaton
EC4P-221-MTXX1
Eaton
EC4P-221-MRXD1
Eaton
EC4P-221-MRXX1
Eaton
EC4P-221-MTAD1
Eaton
EC4P-221-MTAX1
Eaton
EC4P-221-MRAD1
Eaton
EC4P-221-MRAX1
Eaton
EC4P-222-MTXD1
Eaton
EC4P-222-MTXX1
Eaton
EC4P-222-MRXD1
Eaton