Analog output module XI/ON ECO, 24 V DC, 4A(voltage, current)The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.
Analog output module XI/ON ECO, 24 V DC, 4A(voltage, current)
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.
Function | XI/ON I/O modules |
Function | XNE Slice module |
Short Description | 4 Analog outputs -10/0 to +10 V DC 0/4 to 20 mA Switchable as channels |
Standards | |
Potential isolation | EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Ambient temperature >Ambient temperature, operation |
Yes, through optocoupler |
Ambient temperature >Storage, transport [ϑ] |
0 - +55 °C |
Relative humidity >Relative humidity |
-25 - +85 °C |
Ambient conditions, mechanical >Degree of Protection |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
Ambient conditions, mechanical >Harmful gases |
IP20 |
Vibration resistance, operating conditions | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
Mechanical shock resistance | according to IEC/EN 60068-2-6 |
Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
Drop and topple | According to IEC 60068-2-29 |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
Approvals | to EN 61131-2 |
Other technical data (sheet catalogue) | CE, cULus EAC |
Rated data | Technical Data |
Connection design in TOP direction | |
Stripping length | according to VDE 0611 Part 1/8.92 / IEC/EN 60947-7-1 |
Clamping range | Push-In spring-cage terminals |
Connectable conductors >"e" solid H07V-U |
8 mm |
Connectable conductors >"f" flexible H 07V-K |
max. 0.14 - 1.5 mm2 |
Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Connectable conductors >"e" solid H07V-U |
0.25 - 1.5 mm2 |
Connectable conductors >"f" flexible H 07V-K |
0.25 - 0.75 mm2 |
Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Gauge pin IEC/EN 60947-1 | 0.25 - 1.5 mm2 |
Measured variables | 0.25 - 0.75 mm2 |
Channels | A1 |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | Voltage, Current |
Rated current consumption from module bus [IMB ] | 4 Number |
Heat dissipation | 24 V DC |
Offset error | 150 mA |
Basic error limit at 23 °C | ≦ 40 mA |
Temperature coefficient | < 3 W |
Measured value representation | 0.1 % |
Measured variables | 0.2 % |
Channels | 200 ppm/°C of full-scale value |
Rated voltage through supply terminal [UL ] | 16-bit signed integer 12-bit full range, flush left Standard/extended range/PA (NE43) |
Rated current consumption from supply terminal [IL ] | |
Rated current consumption from module bus [IMB ] | Voltage, Current |
Heat dissipation | 4 Number |
Output voltage | 24 V DC |
Output current | 150 mA |
Load resistance >Resistive load |
≦ 40 mA |
Load resistance >Inductive load |
< 3 W |
Load resistance >Capacitive load |
-10/0…+10 V DC |
Short-circuit current | 0/4 - 20 mA |
Transfer frequency | < 450 (Strom), > 1000 (Spannung) Ω |
Offset error | < 0.001 h |
Basic error limit at 23 °C | >1 µF |
Temperature coefficient | 40 mA |
Settling time >Resistive load |
20 Hz |
Settling time >Inductive load |
0.1 % |
Settling time >Capacitive load |
0.2 % |
Measured value representation | 200 ppm/°C of full-scale value |
Channels | 1 ms |
Rated voltage through supply terminal [UL ] | 2 ms |
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 2 ms |
Rated current consumption from module bus [IMB ] | 16-bit signed integer 12-bit full range, flush left Standard/extended range/PA (NE43) |
Power loss [P] | |
Resistive load | 4 Number |
Inductive load | 24 V DC |
Channels | 150 mA |
Rated voltage through supply terminal [UL ] | ≦ 40 mA |
Rated current consumption from supply terminal [IL ] | Normally 3 W |
Rated current consumption from module bus [IMB ] | < 450 (Strom), > 1000 (Spannung) Ω |
Heat dissipation | < 0.001 h |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | 4 Number |
Rated current consumption from module bus [IMB ] | 24 V DC |
Power loss [P] | 150 mA |
Rated voltage through supply terminal [UL ] | ≦ 40 mA |
Rated current consumption from supply terminal [IL ] | < 3 W |
Rated current consumption from module bus [IMB ] | |
Power loss [P] | 24 V DC |
Channels | 150 mA |
Rated voltage through supply terminal [UL ] | ≦ 40 mA |
Rated current consumption from supply terminal [IL ] | Normally 3 W |
Rated current consumption from module bus [IMB ] | |
Heat dissipation | 24 V DC |
Temperature coefficient | 150 mA |
Rated voltage through supply terminal [UL ] | ≦ 40 mA |
Rated current consumption from supply terminal [IL ] | 3 W |
Rated current consumption from module bus [IMB ] | |
Power loss [P] | 4 Number |
Rated operational current for specified heat dissipation [In] | 24 V DC |
Heat dissipation per pole, current-dependent [Pvid] | 150 mA |
Equipment heat dissipation, current-dependent [Pvid] | ≦ 40 mA |
Static heat dissipation, non-current-dependent [Pvs] | < 3 W |
Heat dissipation capacity [Pdiss] | |
Operating ambient temperature min. | 200 ppm/°C of full-scale value |
Operating ambient temperature max. | |
Degree of Protection | 24 V DC |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
150 mA |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
≦ 40 mA |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Normally 3 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 A |
10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
3 W |
10.3 Degree of protection of ASSEMBLIES | 0 W |
10.4 Clearances and creepage distances | 0 °C |
10.5 Protection against electric shock | +55 °C |
10.6 Incorporation of switching devices and components | IP20 |
10.7 Internal electrical circuits and connections | |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function | Meets the product standard´s requirements. |
Supply voltage AC 50 Hz | Meets the product standard´s requirements. |
Supply voltage AC 60 Hz | Meets the product standard´s requirements. |
Supply voltage DC | Does not apply, since the entire switchgear needs to be evaluated. |
Voltage type of supply voltage | Does not apply, since the entire switchgear needs to be evaluated. |
Input, current | Is the panel builder´s responsibility. |
Input, voltage | Is the panel builder´s responsibility. |
Input, resistor | Is the panel builder´s responsibility. |
Input, resistance thermometer | Is the panel builder´s responsibility. |
Input, thermocouple | Is the panel builder´s responsibility. |
Input signal, configurable | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Resolution of the analogue inputs | Is the panel builder´s responsibility. |
Output, current | Is the panel builder´s responsibility. |
Output, voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Output signal configurable | |
Resolution of the analogue outputs | |
Number of analogue inputs | 0 - 0 V |
Number of analogue outputs | 0 - 0 V |
Analogue inputs configurable | 20.4 - 28.8 V |
Analogue outputs configurable | DC |
Number of HW-interfaces industrial Ethernet | No |
Number of interfaces PROFINET | No |
Number of HW-interfaces RS-232 | No |
Number of HW-interfaces RS-422 | No |
Number of HW-interfaces RS-485 | No |
Number of HW-interfaces serial TTY | No |
Number of HW-interfaces parallel | 0 Bit |
Number of HW-interfaces Wireless | Yes |
Number of HW-interfaces USB | Yes |
Number of HW-interfaces other | Yes |
Supporting protocol for TCP/IP | 16 Bit |
Supporting protocol for PROFIBUS | 0 |
Supporting protocol for CAN | 4 |
Supporting protocol for INTERBUS | Yes |
Supporting protocol for ASI | Yes |
Supporting protocol for KNX | 0 |
Supporting protocol for MODBUS | 0 |
Supporting protocol for Data-Highway | 0 |
Supporting protocol for DeviceNet | 0 |
Supporting protocol for SUCONET | 0 |
Supporting protocol for LON | 0 |
Supporting protocol for PROFINET IO | 0 |
Supporting protocol for PROFINET CBA | 0 |
Supporting protocol for SERCOS | 0 |
Supporting protocol for Foundation Fieldbus | 1 |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | No |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | No |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
Degree of protection (NEMA) | No |
Type of electric connection | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | No |
Suitable for safety functions | No |
Category according to EN 954-1 | No |
SIL according to IEC 61508 | No |
Performance level acc. EN ISO 13849-1 | No |
Appendant operation agent (Ex ia) | No |
Appendant operation agent (Ex ib) | No |
Explosion safety category for gas | Yes |
Explosion safety category for dust | IP20 |
Width | |
Height | Screw-/spring clamp connection |
Depth | Yes |
Product Standards | Yes |
North America Certification | No |
Specially designed for North America | No |
Current Limiting Circuit-Breaker | No |
Link to sheet catalogue | No |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.