Base module block XI/ON, tension spring, 6 connection levels, con. to C railRack, XI/ON block base modules, Connection levels: 6 connection levels, Connection technique: Spring-loaded terminals, for Block module, Connection to C rail, Degree of Protection: IP20, For use with: XN-32DO-24VDC-0.5A-P, Standards: EN 61000-6-2, EN 61000-6-4, EN 61131-2
Base module block XI/ON, tension spring, 6 connection levels, con. to C rail
Rack, XI/ON block base modules, Connection levels: 6 connection levels, Connection technique: Spring-loaded terminals, for Block module, Connection to C rail, Degree of Protection: IP20, For use with: XN-32DO-24VDC-0.5A-P, Standards: EN 61000-6-2, EN 61000-6-4, EN 61131-2
| Function | XI/ON block base modules |
| Connection levels | 6 connection levels |
| Connection technique | Spring-loaded terminals |
| Function | for Block module |
| Short Description | Connection to C rail |
| For use with | XN-32DO-24VDC-0.5A-P |
| Standards | |
| Potential isolation | EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
| Ambient temperature | Yes, through optocoupler |
| Relative humidity | 0 - +55 °C |
| Harmful gases | 5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
| Vibration resistance, operating conditions | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
| Mechanical shock resistance | according to IEC/EN 60068-2-6 |
| Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
| Drop and topple | According to IEC 60068-2-29 |
| Degree of Protection | According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
IP20 |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
| Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
| Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
| Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
| Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
| Approvals | to EN 61131-2 |
| Other technical data (sheet catalogue) | CE, cUL (where required in process) |
| Rated data | Technical Data |
| Connection design in TOP direction | |
| Stripping length | according to VDE 0611 Part 1/8.92 / IEC/EN 60947-7-1 |
| Clamping range | Spring-loaded/screw terminal |
| Connectable conductors >"e" solid H07V-U |
8 mm |
| Connectable conductors >"f" flexible H 07V-K |
max. 0.5 - 2.5 mm2 |
| Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.5 - 2.5 mm2 |
| Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.5 - 1.5 mm2 |
| Gauge pin IEC/EN 60947-1 | 0.5 - 1.5 mm2 |
| Rated operational current for specified heat dissipation [In] | 0.5 - 1.5 mm2 |
| Heat dissipation per pole, current-dependent [Pvid] | A1 |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 0 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | 0 W |
| Degree of Protection | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
IP20 |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| With integrated power supply | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Input voltage at AC 50 Hz | Is the panel builder´s responsibility. |
| Input voltage at AC 60 Hz | Is the panel builder´s responsibility. |
| Input voltage at DC | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Type of voltage (input voltage) | |
| Max. input current AC 50 Hz | |
| Max. input current AC 60 Hz | No |
| Max. input current DC | 0 - 0 V |
| Output voltage at AC 50 Hz | 0 - 0 V |
| Output voltage at AC 60 Hz | 0 - 0 V |
| Output voltage at DC | DC |
| Type of output voltage | 0 A |
| Max. output current AC 50 Hz | 0 A |
| Max. output current AC 60 Hz | 0 A |
| Max. output current DC | 0 - 0 V |
| System accessory | 0 - 0 V |
| Number of slots | 0 - 0 V |
| With pluggable modules, digital I/O | DC |
| With pluggable modules, analogue I/O | 0 A |
| With pluggable modules, communication modules | 0 A |
| With pluggable modules, function and technology modules | 0 A |
| With pluggable modules, central modules | Yes |
| With pluggable modules, others | 1 |
| Rail mounting possible | Yes |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | Yes |
| Category according to EN 954-1 | No |
| SIL according to IEC 61508 | Yes |
| Performance level acc. EN ISO 13849-1 | No |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | No |
| Explosion safety category for dust | |
| Width | None |
| Height | None |
| Depth | No |
| Product Standards | No |
| UL File No. | None |
| UL Category Control No. | None |
| CSA File No. | 12.6 mm |
| CSA Class No. | 154.5 mm |
| North America Certification | 49.9 mm |
| Specially designed for North America | UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking |
| Current Limiting Circuit-Breaker | E205091 |
| Degree of Protection | NRAQ, NRAQ7 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
