Function |
XN300 I/O slice modules |
Connection technique |
Push-in spring-cage terminal |
Function |
XN-322 analog input and output module for XN300 |
Short Description |
2 analog inputs and 2 analog outputs, +/-10 V, Uref |
For use with |
XN-312-… |
Standards |
|
Approvals >Approvals |
IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4 |
Approvals >shipping classification |
CE, cULus EAC |
Approvals |
DNV GL |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
|
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
8 / 4 kV |
Electromagnetic compatibility (EMC) >Burst >Supply cable |
10 / 3 / 1 V/m |
Electromagnetic compatibility (EMC) >Burst >Signal cable |
2 kV |
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced) |
1 kV |
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced) |
0,5 / 0,5 kV |
Electromagnetic compatibility (EMC) >Radiated RFI |
1 kV |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
10 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
40 / 47 class A dB |
Ambient conditions >Climatic conditions >Climatic proofing |
Yes / 10 ms |
Ambient conditions >Climatic conditions >Air pressure (operation) |
Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3 |
Ambient conditions >Climatic conditions >Relative humidity |
795 - 1080 hPa |
Ambient conditions >Climatic conditions >Condensation |
0 - 95%, non condensing |
Ambient conditions >Temperature >Operation |
prevent with suitable measures |
Ambient conditions >Temperature >Storage, transport [ϑ] |
0 - +60 °C |
Degree of Protection |
-20 - +85 °C |
Mounting position |
IP20 |
Free fall, packaged (IEC/EN 60068-2-32) |
Horizontal |
Vibrations [3,5 mm / 1 g] |
1 m |
Mechanical shock resistance [Semisinusoidal 15 g/11 ms] |
5 - 8.4 / 8.4 -150 Hz |
Rated operational data >Insulating material group |
18 Impacts |
Rated operational data >Overvoltage category / pollution degree |
|
Rated operational data >Rated operating voltage |
I |
Rated operational data >Maximum load current/cross-sectional area |
III / 3 |
Connection design in TOP direction |
160 V |
Stripping length |
X (not specified by plug manufacturer) A / mm² |
Gauge pin IEC/EN 60947-1 |
Push-in spring-cage terminal (plug-in connection) |
Connection specifications >"e" solid H07V-U |
10 mm |
Connection specifications >"f" flexible H 07V-K |
A1 |
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2
|
Connection specifications >Cable size |
0.25 - 1.5 mm2 |
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I] |
0.25-1,5 mm2 |
Power supply - Input >Power supply >Current consumption for +24 V power supply [I] |
24 - 16 AWG |
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)] |
|
Power supply - Output >Sensor/transmitter supply >Rated operating voltage [Ua] |
(typ.)55 mA |
Power supply - Output >Sensor/transmitter supply >Rated operational current [Imax] |
(typ.)45 mA |
Power supply - Output >Sensor/transmitter supply >Potential isolation |
no |
Power supply - Output >Sensor/transmitter supply >Notes on power supply |
10 V |
Heat dissipation >Heat dissipation (without active channels) |
0.0083 A |
Heat dissipation >Max. heat dissipation |
no |
Heat dissipation >Notes on heat dissipation |
Reference voltage output: permissible output current of 4.17 mA per channel |
Channels |
1.018 W |
Measured variables |
1.952 W |
Resolution |
The max. heat dissipation is specified as the maximum power produced inside the device´s housing. |
Min. value refresh time/cycle time [per channel / all channels] |
|
Hardware input filter |
2 Quantity |
Software input filter |
Voltage or potentiometer |
Potential isolation |
16 Bit |
Analog outputs >Channels |
1 / 1 ms |
Analog outputs >Output voltage >Output voltage, nominal value |
Typically: 1 kHz, third-order low-pass filter |
Analog outputs >Output voltage >Resolution |
parameterizable |
Analog outputs >Output voltage >Refresh time [All channels] |
no |
Analog outputs >Output voltage >For connection of: |
|
Analog outputs >Load resistor >Resistive load |
2 Quantity |
Analog outputs >Load resistor >Capacitive load |
-10 ... +10 V DC |
Analog outputs >Short-circuit strength |
12 Bit |
Analog outputs >Short-circuit current [per channel] |
1 ms |
Analog outputs >Accuracy |
2 conductors |
Voltage measurement >Channels |
>5000 Ω |
Voltage measurement >Measurement ranges |
0.1 µF |
Voltage measurement >Value representation |
yes |
Voltage measurement >For connection of: |
30 mA |
Voltage measurement >Maximum input voltage |
±0.5 % of full scale |
Voltage measurement >Common-mode range |
|
Voltage measurement >Input resistance |
2 Quantity |
Voltage measurement >Limiting frequency |
-10 … +10 V DC |
Voltage measurement >Accuracy |
SIGNED16 m V |
Voltage measurement >Notes on voltage measurement |
2 conductors |
Rated operational current for specified heat dissipation [In] |
14 V DC |
Heat dissipation per pole, current-dependent [Pvid] |
±12 V DC |
Equipment heat dissipation, current-dependent [Pvid] |
> 10 MΩ |
Static heat dissipation, non-current-dependent [Pvs] |
Typically: 1 kHz (third-order low-pass filter) |
Heat dissipation capacity [Pdiss] |
±0.3 % of full load |
Operating ambient temperature min. |
Open wire monitoring. The channels can also be used as potentiometer inputs. |
Operating ambient temperature max. |
|
Degree of Protection |
0 A |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
1.952 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 °C |
10.2 Strength of materials and parts >10.2.5 Lifting |
+55 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
IP20 |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Meets the product standard´s requirements. |
10.8 Connections for external conductors |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise |
Meets the product standard´s requirements. |
10.11 Short-circuit rating |
Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility |
Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Supply voltage AC 50 Hz |
Is the panel builder´s responsibility. |
Supply voltage AC 60 Hz |
Is the panel builder´s responsibility. |
Supply voltage DC |
Is the panel builder´s responsibility. |
Voltage type of supply voltage |
Is the panel builder´s responsibility. |
Input, current |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Input, voltage |
Is the panel builder´s responsibility. |
Input, resistor |
Is the panel builder´s responsibility. |
Input, resistance thermometer |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Input, thermocouple |
|
Input signal, configurable |
|
Resolution of the analogue inputs |
0 - 0 V |
Output, current |
0 - 0 V |
Output, voltage |
18 - 30 V |
Output signal configurable |
DC |
Resolution of the analogue outputs |
No |
Number of analogue inputs |
Yes |
Number of analogue outputs |
No |
Analogue inputs configurable |
No |
Analogue outputs configurable |
No |
Number of HW-interfaces industrial Ethernet |
No |
Number of interfaces PROFINET |
16 Bit |
Number of HW-interfaces RS-232 |
No |
Number of HW-interfaces RS-422 |
Yes |
Number of HW-interfaces RS-485 |
No |
Number of HW-interfaces serial TTY |
12 Bit |
Number of HW-interfaces parallel |
2 |
Number of HW-interfaces Wireless |
2 |
Number of HW-interfaces USB |
Yes |
Number of HW-interfaces other |
No |
Supporting protocol for TCP/IP |
0 |
Supporting protocol for PROFIBUS |
0 |
Supporting protocol for CAN |
0 |
Supporting protocol for INTERBUS |
0 |
Supporting protocol for ASI |
0 |
Supporting protocol for KNX |
0 |
Supporting protocol for MODBUS |
0 |
Supporting protocol for Data-Highway |
0 |
Supporting protocol for DeviceNet |
0 |
Supporting protocol for SUCONET |
1 |
Supporting protocol for LON |
No |
Supporting protocol for PROFINET IO |
No |
Supporting protocol for PROFINET CBA |
Yes |
Supporting protocol for SERCOS |
No |
Supporting protocol for Foundation Fieldbus |
No |
Supporting protocol for EtherNet/IP |
No |
Supporting protocol for AS-Interface Safety at Work |
No |
Supporting protocol for DeviceNet Safety |
No |
Supporting protocol for INTERBUS-Safety |
No |
Supporting protocol for PROFIsafe |
No |
Supporting protocol for SafetyBUS p |
No |
Supporting protocol for other bus systems |
No |
Radio standard Bluetooth |
No |
Radio standard WLAN 802.11 |
No |
Radio standard GPRS |
No |
Radio standard GSM |
No |
Radio standard UMTS |
No |
IO link master |
No |
System accessory |
No |
Degree of protection (IP) |
No |
Degree of protection (NEMA) |
No |
Type of electric connection |
No |
Fieldbus connection over separate bus coupler possible |
No |
Rail mounting possible |
No |
Wall mounting/direct mounting |
No |
Front build in possible |
No |
Rack-assembly possible |
No |
Suitable for safety functions |
No |
Category according to EN 954-1 |
Yes |
SIL according to IEC 61508 |
IP20 |
Performance level acc. EN ISO 13849-1 |
|
Appendant operation agent (Ex ia) |
Screw-/spring clamp connection |
Appendant operation agent (Ex ib) |
No |
Explosion safety category for gas |
Yes |
Explosion safety category for dust |
No |
Width |
No |
Height |
No |
Depth |
No |
Product Standards |
|
UL File No. |
None |