XN-322-1CNT-8DIO
178795 XN-322-1CNT-8DIO
178795

Counter module, 4 digital inputs +24 V , 4 digital outputs, +24 V/ 2A, 1 incremental encoder input (RS422 or TTL) up to 125 kHz, 16 bits
Counter module with RS422/TTL inputs for frequencies of up to 125 kHz and 4 digital inputs and 4 digital outputs with 2 A. These modules are particularly useful for reading counter values used in positioning applications.

Function	XN300 technology modules
Connection technique	Push-in spring-cage terminal
Function	XN-322 counter module for XN300
Short Description	Counter module 4 digital inputs and 4 digital outputs, 1 CNT, 16 bit, RS422/TTL inputs to 125 kHz, outputs 2 A
For use with	XN-312-…
Standards
Approvals >Approvals	IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4
Approvals >shipping classification	CE, cULus EAC
Approvals	DNV GL
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	8 / 4 kV
Electromagnetic compatibility (EMC) >Burst >Supply cable	10 / 3 / 1 V/m
Electromagnetic compatibility (EMC) >Burst >Signal cable	2 kV
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced)	1 kV
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced)	0,5 / 0,5 kV
Electromagnetic compatibility (EMC) >Radiated RFI	1 kV
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	10 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	40 / 47 class A dB
Ambient conditions >Climatic conditions >Climatic proofing	Yes / 10 ms
Ambient conditions >Climatic conditions >Air pressure (operation)	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Ambient conditions >Climatic conditions >Relative humidity	795 - 1080 hPa
Ambient conditions >Climatic conditions >Condensation	0 - 95%, non condensing
Ambient conditions >Temperature >Operation	prevent with suitable measures
Ambient conditions >Temperature >Storage, transport [ϑ]	0 - +60 °C
Degree of Protection	-20 - +85 °C
Mounting position	IP20
Free fall, packaged (IEC/EN 60068-2-32)	Horizontal
Vibrations [3,5 mm / 1 g]	1 m
Mechanical shock resistance [Semisinusoidal 15 g/11 ms]	5 - 8.4 / 8.4 -150 Hz
Rated operational data >Insulating material group	18 Impacts
Rated operational data >Overvoltage category / pollution degree
Rated operational data >Rated operating voltage	I
Rated operational data >Maximum load current/cross-sectional area	III / 3
Connection design in TOP direction	160 V
Stripping length	X (not specified by plug manufacturer) A / mm²
Gauge pin IEC/EN 60947-1	Push-in spring-cage terminal (plug-in connection)
Connection specifications >"e" solid H07V-U	10 mm
Connection specifications >"f" flexible H 07V-K	A1
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >Cable size	0.25 - 1.5 mm2
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I]	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +24 V power supply [I]	24 - 16 AWG
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)]
Power supply - Input >Power supply >Rated operating voltage [Ue]	(typ.)40 mA
Power supply - Input >Power supply >Rated operational current [Ie]	(typ.)none mA
Power supply - Input >Power supply >Potential isolation	no
Power supply - Input >Power supply >Rated operating voltage [Ue]	24 V (for incremental encoder) V
Power supply - Input >Power supply >Rated operational current [Ie]	0.25 A
Power supply - Input >Power supply >Potential isolation	no
Power supply - Output >Sensor/transmitter supply >Rated operating voltage [Ua]	24 V (for dig. outputs) V
Power supply - Output >Sensor/transmitter supply >Rated operational current [Imax]	6 A
Power supply - Output >Sensor/transmitter supply >Potential isolation	no
Heat dissipation >Heat dissipation (without active channels)	5 V
Heat dissipation >Max. heat dissipation	0.2 A
Heat dissipation >Notes on heat dissipation	no
Channels	1.218 W
Input voltage >Nominal input voltage [Ue]	3.516 W
Input voltage >Low level [UeL]	The max. heat dissipation is specified as the maximum power produced inside the device´s housing.
Input voltage >High level [UeH]
Input current >Input current, nominal value [Ie]	4 Number
Input current >Low level⁄active level [IeL]	24 V DC
Input current >High level⁄active level [IeH]	0 < UeL < +8 V
Input delay >tRising edge	+14 < UeH < +30 V
Input delay >tFalling edge	3.7 mA
Potential isolation	≤1.1 mA
Heat dissipation (per active channel)	≥2.3 mA
Input delay >Potential isolation	< 10 µs
Input delay >Heat dissipation (per active channel)	< 10 µs
Incremental encoder >Channels	no Input to input
Incremental encoder >Signals >RS422	0.088 W
Incremental encoder >Signals >Bus termination resistor
Incremental encoder >Signals >TTL	no Input to input
Incremental encoder >Signals >Bus termination resistor	0.088 W
Incremental encoder >Potential isolation	1 Quantity
Incremental encoder >Heat dissipation (per active channel)	A, /A, B, /B, R, /R
Incremental encoder >Notes on incremental encoder	120 Ω (internal)
Channels	A, B, R
Output voltage >Output voltage, nominal value [Ua]	1200 Ω (internal pull-up resistor)
Output voltage >Low level [UaL]	no
Output voltage >High level [UaH]	1.105 W
Output current >Output current, nominal value [IaL]	The incremental encoder must be wired using a screened cable. In the case of RS422 encoders, it is recommended to use a screened twisted-pair cable. The shielding must be terminated as close as possible to the module (upstream of it).
Output current >Low signal [IA ]
Output current >High level [IaH]	4 Quantity
Short-circuit rating	24 V DC
Potential isolation	0V < UaL < 1V V
Heat dissipation (internal, per active channel)	Ue - 1V < UaH < Ue V
Utilization factor [%]	2 A
Delay on signal change and resistive load >from Low to High level	0 < IaL < 0.5 mA
Delay on signal change and resistive load >From High to Low signal	0 ≤ IaH ≤ 2000 mA
Resistive load >Resistive load	Yes
Notes on digital outputs	no Output against output
Counting mode >Operate Mode	0.388 W
Counting mode >Channels	75% (Ʃ IAmax = 6A) g
Counting mode >Resolution	< 200 µs
Counting mode >Input frequency [fmax]	< 200 µs
Counting mode >Signal analysis	> 12 Ω
Counting mode >Counter frequency [fmax]	Protective devices must be installed directly at the inductive load in order to prevent interference.
Counting mode >Operate Mode
Counting mode >Channels	RS422
Counting mode >Resolution	1 Quantity
Counting mode >Input frequency [fmax]	16 Bit
Counting mode >Signal analysis	125 kHz
Counting mode >Counter frequency [fmax]	X1/X2/X4 encoding
Counting mode >Notes on operating mode	Max. 500 kHz (X4 encoding) kHz
Rated operational current for specified heat dissipation [In]	TTL
Heat dissipation per pole, current-dependent [Pvid]	1 Quantity
Equipment heat dissipation, current-dependent [Pvid]	16 Bit
Static heat dissipation, non-current-dependent [Pvs]	125 kHz
Heat dissipation capacity [Pdiss]	X1/X2/X4 encoding
Operating ambient temperature min.	Max. 500 kHz (X4 encoding) kHz
Operating ambient temperature max.	RS422 or TTL operating mode, configurable
Degree of Protection
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+60 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	IP20
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	Is the panel builder´s responsibility.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Number of functions	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of interfaces PROFINET	Is the panel builder´s responsibility.
Number of HW-interfaces RS-232	Is the panel builder´s responsibility.
Number of HW-interfaces RS-422	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces RS-485
Number of HW-interfaces serial TTY
Number of HW-interfaces parallel	0 - 0 V
Number of HW-interfaces Wireless	0 - 0 V
Number of HW-interfaces USB	18 - 30 V
Number of HW-interfaces other	DC
With optical interface	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Suitable for counting	No
Suitable for weighting	No
Suitable for temperature control	No
Suitable for welding control	No
Suitable for pressure control	No
Suitable for NC	No
Function electronic positioning available	No
Suitable for CNC	No
Suitable for SSI	No
Suitable for incremental data detection	No
Suitable for detection absolute value	Yes
Flux controller possible	Yes
Suitable for flux measurement	No
Suitable for path controller	No
Suitable for cam controller	No
Suitable for flying saw	No
Suitable for multi-axis control	No
Single-axis controller possible	Yes
Suitable for multi-axis positioning	No
Single-axis positioning possible	No
Function block restart blockage	Yes
Function block automatic reset	Yes
Contactor control function block	No
Function block emergency stop	No
Function block contactless working protection installation	No
Function block affirm pushbutton	No
Function block 2-hand switching	No
Function block operating mode selection	No
Function block access control	No
Degree of protection (IP)	No
Degree of protection (NEMA)	Yes
Fieldbus connection over separate bus coupler possible	No
Frequency measurement	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	IP20
Appendant operation agent (Ex ia)
Appendant operation agent (Ex ib)	Yes
Explosion safety category for gas	No
Explosion safety category for dust	Yes
Width	No
Height	No
Depth	No
Product Standards	No
UL File No.

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.