Product range |
Circuit-breakers PKE up to 65 A |
Basic function |
System protection Line and cable protection |
Single unit/Complete unit |
Complete device with standard knob |
Connection technique |
Screw terminals |
Setting range of overload releases [Ir] |
30 - 65 A |
Function |
With overload release |
Rated uninterrupted current = rated operational current [Iu = Ie
] |
65 A |
Standards |
|
Climatic proofing |
IEC/EN 60947, VDE 0660 |
Ambient temperature >Storage |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
Ambient temperature >Open |
- 40 - 80 °C |
Ambient temperature >Enclosed |
-25 - +55 °C |
Mounting position |
- 25 - 40 °C |
Direction of incoming supply |
|
Degree of protection >Device |
as required |
Degree of protection >Terminations |
IP20 |
Protection against direct contact when actuated from front (EN 50274) |
IP00 |
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 |
Finger and back-of-hand proof |
Altitude |
15 g |
Terminal capacity main cable >Screw terminals >Solid |
Max. 2000 m |
Terminal capacity main cable >Screw terminals >Flexible with ferrule to DIN 46228 |
1 x (0.75 - 16) 2 x (0.75 - 16) mm2 |
Terminal capacity main cable >Screw terminals >Stripping length |
1 x (0.75 - 35) 2 x (0.75 - 25) mm2 |
Specified tightening torque for terminal screws >Main cable |
14 mm |
Specified tightening torque for terminal screws >Control circuit cables |
3.3 Nm |
Rated impulse withstand voltage [Uimp] |
1 Nm |
Overvoltage category/pollution degree |
|
Rated operational voltage [Ue
] |
6000 V AC |
Rated uninterrupted current = rated operational current [Iu = Ie
] |
III/3 |
Rated frequency [f] |
690 V AC |
Current heat loss (3 pole at operating temperature) |
65 A |
Lifespan, mechanical [Operations] |
40 - 60 Hz |
Lifespan, electrical (AC-3 at 400 V) >Lifespan, electrical [Operations] |
21.6 W |
Max. operating frequency |
0.05 x 106 |
AC-4 cycle operation >Minimum current flow times |
0.05 x 106
|
AC-4 cycle operation >Minimum cut-out periods |
60 Ops/h |
AC-4 cycle operation >Note |
500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms |
Temperature compensation >to IEC/EN 60947, VDE 0660 |
500 ms |
Temperature compensation >Operating range |
In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms |
Setting range of overload releases |
|
short-circuit release |
- 5…40 °C |
Short-circuit release tolerance |
- 25…55 °C |
Phase-failure sensitivity |
0.42 - 1 x Iu
|
Rated operational current for specified heat dissipation [In] |
Basic device, fixed: 15.5 x Iu Trip block, adjustable: 5 - 8 x Ir delayed approx. 60 ms |
Heat dissipation per pole, current-dependent [Pvid] |
± 20% |
Equipment heat dissipation, current-dependent [Pvid] |
no (with PKE-XTU(A)CP-...) |
Static heat dissipation, non-current-dependent [Pvs] |
|
Heat dissipation capacity [Pdiss] |
65 A |
Operating ambient temperature min. |
7.2 W |
Operating ambient temperature max. |
21.6 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
-25 °C |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
+55 °C |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections |
Meets the product standard´s requirements. |
10.8 Connections for external conductors |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise |
Is the panel builder´s responsibility. |
10.11 Short-circuit rating |
Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility |
Is the panel builder´s responsibility. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Rated permanent current Iu |
Is the panel builder´s responsibility. |
Rated voltage |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Overload release current setting |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Adjustment range short-term delayed short-circuit release |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Adjustment range undelayed short-circuit release |
|
Integrated earth fault protection |
|
Type of electrical connection of main circuit |
65 A |
Device construction |
690 - 690 V |
Suitable for DIN rail (top hat rail) mounting |
50 kA |
DIN rail (top hat rail) mounting optional |
30 - 65 A |
Number of auxiliary contacts as normally closed contact |
150 - 150 A |
Number of auxiliary contacts as normally open contact |
1008 - 1008 A |
Number of auxiliary contacts as change-over contact |
No |
With switched-off indicator |
Screw connection |
With under voltage release |
Other |
Number of poles |
Yes |
Position of connection for main current circuit |
Yes |
Type of control element |
0 |
Complete device with protection unit |
0 |
Motor drive integrated |
0 |
Motor drive optional |
No |
Degree of protection (IP) |
No |
Specially designed for North America |
3 |
Characteristic curve |
Other |
Characteristic curve |
Turn button |
Characteristic curve |
Yes |