PKE65/AK/XTUW-32-SP
170483 PKE65/AK/XTUW-32-SP
170483

Motor-protective circuit-breaker, Type E DOL starters (complete devices), Electronic, 8 - 32 A, Turn button, Screw connection, North America
Type E complete device as per UL 508 ((self-protected) combination motor controller), consisting of PKE65 basic device and PKE-XTU-32 trip block, with lockable knob and corresponding extension terminal for UL, can be used for motors with up to 20 horse power (FLA = 27 A / 480 V) or 25 horse power (FLA = 27 A / 600 V), short circuit current rating to UL: 65 kA (480 V/ 277 V) or 25 kA (600 V/ 347 V), electronic wide-range overload protection, high short-circuit breaking capacity to IEC (80 kA / 400 V), can be used as a type F motor starter (combination motor controller) in combination with DILM17 to DILM72 contactors.

Basic function	Type E DOL starters (complete devices)
Connection technique	Screw terminals
Components for	North America
Connection to SmartWire-DT	no
AC HP = PS >200 V 208 V
AC HP = PS >230 V 240 V	7.5 HP
AC HP = PS >460 V 480 V	7.5 HP
AC HP = PS >575 V 600 V	20 HP
240 V	25 HP
480 Y 277 V
600 Y 347 V	65 kA
Setting range of overload releases [Ir]	65 kA
Motor-protective circuit-breakers	25 kA
Extension terminal
Notes	8 - 32 A
Standards	PKE65/AK/XTUW-32 Type
Mounting position	BK50/3-PKZ4-E
Ambient temperature	The type E DOL starter (without protection) consists of a PKE65 motor-protective circuit-breaker with AK-PKZ0 and a BK50/3-PKZ4-E extension terminal.
Rated impulse withstand voltage [Uimp]
Overvoltage category/pollution degree	IEC/EN 60947-4-1, VDE 0660, UL, CSA
Rated operational voltage [Ue]
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	-25 - +55
AC-4 cycle operation >Minimum current flow times
AC-4 cycle operation >Minimum cut-out periods	6000 V AC
AC-4 cycle operation >Note	III/3
Motor protective circuit breaker PKZM0, PKE	208 - 600 V
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V	32 A
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	500 ms
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V
Short Circuit Current Rating, type E >240 V	PKE motor-protective circuit-breaker, see motor-protective circuit-breaker product group
Short Circuit Current Rating, type E >480 Y / 277 V	5.4 W
Short Circuit Current Rating, type E >600 Y / 347 V
Rated operational current for specified heat dissipation [In]	7.5 HP
Heat dissipation per pole, current-dependent [Pvid]	7.5 HP
Equipment heat dissipation, current-dependent [Pvid]	20 HP
Static heat dissipation, non-current-dependent [Pvs]	25 HP
Heat dissipation capacity [Pdiss]	65 kA
Operating ambient temperature min.	65 kA
Operating ambient temperature max.	25 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	32 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	1.8 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	5.4 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	-25 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	+55 °C
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Overload release current setting	Is the panel builder´s responsibility.
Adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
With thermal protection	Is the panel builder´s responsibility.
Phase failure sensitive	Is the panel builder´s responsibility.
Switch off technique	Is the panel builder´s responsibility.
Rated operating voltage	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated permanent current Iu	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 230 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Type of control element
Device construction	8 - 32 A
With integrated auxiliary switch	0 - 0 A
With integrated under voltage release	Yes
Number of poles	Yes
Rated short-circuit breaking capacity lcu at 400 V, AC	Electronic
Degree of protection (IP)	690 - 690 V
Height	32 A
Width	7.5 kW
Depth	15 kW
Product Standards	Screw connection
UL File No.	Turn button
UL Category Control No.	Built-in device fixed built-in technique
CSA File No.	No
CSA Class No.	No
North America Certification	3
Specially designed for North America	80 kA
Characteristic curve	IP20

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.