alt
alt

PKE-SWD-SP
150614 PKE-SWD-SP
150614

Function element, SmartWire-DT, PKE / XTPEFunction element, Connection to SmartWire-DT: yes, For use with: PKE12, PKE32, PKE65

Function element, SmartWire-DT, PKE / XTPE
Function element, Connection to SmartWire-DT: yes, For use with: PKE12, PKE32, PKE65

Product range SmartWire-DT slave
Subrange SmartWire DT PKE module for motor protection switch
Basic function Motor protection
Motor protection for heavy starting duty
Product range Accessories
Accessories SmartWire-DT PKE (motor-protective circuit-breaker)
Function For connecting the motor-protective circuit-breaker with PKE-XTU(W)A-... trip blocks(motor protection) to SmartWire-DT
Description Fitted on PKE motor-protective circuit-breaker
Messages Contactor state PKE
Motor current in %
Thermal motor image in %
Trip indications (Overload, Short-circuit,...)
Set value of overload releases
Set time lag (CLASS)
Part no. of trip block
Commands Remote disconnection of motor-protective circuit-breaker
For use with PKE12
PKE32
PKE65
Connection to SmartWire-DT yes
Standards IEC/EN 61131-2
Dimensions (W x H x D) 45 x 46.8 x 70.3 mm
Weight 0.02 kg
Mounting at PKE12/32/65
Mounting position as PKE12/35/65
Protection type (IEC/EN 60529, EN50178, VBG 4) IP20
Vibrations (IEC/EN 61131-2:2008)
>Constant amplitude 3,5 mm
5 - 8.4 Hz
Vibrations (IEC/EN 61131-2:2008)
>Constant acceleration 1 g
8.4 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms 9 Impacts
Drop to IEC/EN 60068-2-31 [Drop height] 50 mm
Free fall, packaged (IEC/EN 60068-2-32) 0.3 m
Overvoltage category II
Pollution degree 2
Electrostatic discharge (IEC/EN 61131-2:2008)
>Air discharge (Level 3)
8 kV
Electrostatic discharge (IEC/EN 61131-2:2008)
>Contact discharge (Level 2)
4 kV
Electromagnetic fields (IEC/EN 61131-2:2008)
>80 - 1000 MHz
10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)
>1.4 - 2 GHz
3 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)
>2 - 2.7 GHz
1 V/m
Radio interference suppression SmartWire-DT
>Radio interference suppression
EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3)
>SmartWire-DT cables
>Signal lines
1 kV
Burst (IEC/EN 61131-2:2008, Level 3)
>CAN/DP-bus cable
>SmartWire-DT cables
1 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3) 10 V
Operating ambient temperature (IEC 60068-2)
>Ambient temperature
-25 - +60 °C
Condensation Take appropriate measures to prevent condensation
Storage [ϑ] -30 - +70 °C
Relative humidity, non-condensing (IEC/EN 60068-2-30) 5 - 95 %
Station type SmartWire-DT slave
Address allocation automatic
Status SmartWire-DT Green LED
Connections Plug, 8-pole
Connection External device plug SWD4-8SF2-5
Current consumption
>15-V-SWD supply
35 mA
Rated operational current for specified heat dissipation [In] 0 A
Heat dissipation per pole, current-dependent [Pvid] 0 W
Equipment heat dissipation, current-dependent [Pvid] 0 W
Static heat dissipation, non-current-dependent [Pvs] 0.5 W
Heat dissipation capacity [Pdiss] 0 W
Operating ambient temperature min. -25 °C
Operating ambient temperature max. +55 °C
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of accessory Connection technique
Product Standards UL508; CSA-C22.2 No. 14; IEC60847-4-1; CE marking
UL File No. E29184
UL Category Control No. NKCR
CSA File No. 165628
CSA Class No. 3211-07
North America Certification UL listed, CSA certified
Specially designed for North America No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.

Similar Products

DS7-34DSX200N0-D
Eaton
DS7-34DSX160N0-D
Eaton
DS7-34DSX135N0-D
Eaton
DS7-34DSX081N0-D
Eaton
NZM-XSWD-704
Eaton
DS7-34DSX100N0-D
Eaton
DS7-34DSX032N0-D
Eaton