MSC-D-0,25-M7(24VDC)
283154 MSC-D-0,25-M7(24VDC)
283154

DOL starter, 380 V 400 V 415 V: 0.06 kW, Ir= 0.16 - 0.25 A, 24 V DC, DC
DOL starter, Basic device: MSC, Notes: Also suitable for motors with efficiency class IE3., IE3-ready devices are identified by the logo on their packaging., Motor ratings Motor rating AC-3 380 V 400 V 415 V: P= 0.06 kW, Setting range of overload releases: Ir= 0.16 - 0.25 A, Coordination: Type of coordination “1”, Type of coordination “2”, Actuating voltage: 24 V DC, DC, Standards: IEC/EN 60947-4-1, VDE 0660

Basic function	DOL starters (complete devices)
Basic device	MSC
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Connection to SmartWire-DT	Screw terminals
Motor rating [P] >AC-3 >380 V 400 V 415 V [P]	no
Rated operational current >AC-3 >380 V 400 V 415 V [Ie]
Rated short-circuit current 380 - 415 V [Iq ]	0.06 kW
Setting range of overload releases [Ir]	0.21 A
Coordination	150 kA
Contact sequence
Actuating voltage	0.16 - 0.25 A
Motor-protective circuit-breakers	Type of coordination “1” Type of coordination “2”
Contactor
DOL starter wiring set Mechanical connection element and electrical electric contact module	24 V DC
Notes	DC
Notes	PKZM0-0,25 Type
Standards	DILM7-10(...) Part no.
Mounting position	PKZM0-XDM12 Type
Altitude	BK25/3-PKZ0-E extension terminal and if necessary B3.../...-PKZ0 three-phase commoning link can be added to motor-starter combinations to make Type F starters in accordance with UL508.
Ambient temperature	The DOL starters (complete units) consist of a PKZM0 motor protective circuit breaker and a DILM contactor. With the adapter-less top-hat rail mounting of starters up to 15 A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical support via a mechanical connection element. Control wire guide with max. 6 conductors up to 2.5 mm external diameter or 4 conductors up to 3.5 mm external diameter. The connection of the main circuit between PKZ and contactor is established with electrical contact modules. When using the auxiliary contacts DILA‐XHIT… (￫ 101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact.
Rated impulse withstand voltage [Uimp]
Overvoltage category/pollution degree	IEC/EN 60947-4-1, VDE 0660
Rated operational voltage [Ue]
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	Max. 2000 m
Motor protective circuit breaker PKZM0, PKE	-25 - +55
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V
DC operated [Sealing]	6000 V AC
Auxiliary contacts >Pilot Duty >AC operated	III/3
Auxiliary contacts >Pilot Duty >DC operated	230 - 415 V
Auxiliary contacts >General Use >AC	0.25 A
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >DC	PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts >General Use >DC	5.7 W
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	2.6 W
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs]	A600
Heat dissipation capacity [Pdiss]	P300
Operating ambient temperature min.	600 V
Operating ambient temperature max.	15 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	250 V
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0.25 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	1.9 W
10.2 Strength of materials and parts >10.2.5 Lifting	5.7 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	2.6 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	-25 °C
10.4 Clearances and creepage distances	+55 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Kind of motor starter	Does not apply, since the entire switchgear needs to be evaluated.
With short-circuit release	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation power at AC-3, 230 V, 3-phase	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated power, 460 V, 60 Hz, 3-phase	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 575 V, 60 Hz, 3-phase	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation current Ie	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operation current at AC-3, 400 V
Overload release current setting
Rated conditional short-circuit current, type 1, 480 Y/277 V	Direct starter
Rated conditional short-circuit current, type 1, 600 Y/347 V	Yes
Rated conditional short-circuit current, type 2, 230 V	0 - 0 V
Rated conditional short-circuit current, type 2, 400 V	0 - 0 V
Number of auxiliary contacts as normally open contact	24 - 24 V
Number of auxiliary contacts as normally closed contact	DC
Ambient temperature, upper operating limit	0.04 kW
Temperature compensated overload protection	0.06 kW
Release class	0 kW
Type of electrical connection of main circuit	0 kW
Type of electrical connection for auxiliary- and control current circuit	0.21 A
Rail mounting possible	0.25 A
With transformer	0.25 - 0.25 A
Number of command positions	0 A
Suitable for emergency stop	0 A
Coordination class according to IEC 60947-4-3	50 A
Number of indicator lights	50 A
External reset possible	1
With fuse	0
Degree of protection (IP)	60 °C
Degree of protection (NEMA)	Yes
Supporting protocol for TCP/IP	CLASS 10 A
Supporting protocol for PROFIBUS	Screw connection
Supporting protocol for CAN	Screw connection
Supporting protocol for INTERBUS	Yes
Supporting protocol for ASI	No
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	Class 2
Supporting protocol for SUCONET	0
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	IP20
Supporting protocol for SERCOS	Other
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	No
Depth	No
Product Standards	No
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	No
North America Certification	No
Specially designed for North America	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.