MSC-D-0,25-M7(110V50/60HZ)
115442 MSC-D-0,25-M7(110V50/60HZ)
115442

DOL starter, 380 V 400 V 415 V: 0.06 kW, Ir= 0.16 - 0.25 A, 110 V 50Hz/60Hz, AC
Premounted motor starter with minimized wiring time consisting of motor-protective circuit-breaker and contactor

Basic function	DOL starters (complete devices)
Basic device	MSC
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Connection to SmartWire-DT	Screw terminals
Motor rating [P] >AC-3 >380 V 400 V 415 V [P]	no
Rated operational current >AC-3 >380 V 400 V 415 V [Ie]
Setting range of overload releases [Ir]	0.06 kW
Coordination	0.21 A
Contact sequence
Actuating voltage	0.16 - 0.25 A
Motor-protective circuit-breakers	Type of coordination “1” Type of coordination “2”
Contactor
DOL starter wiring set Mechanical connection element and electrical electric contact module	110 V 50Hz/60Hz
Notes	AC
Standards	PKZM0-0,25 Type
Mounting position	DILM7-10(...) Part no.
Altitude	PKZM0-XDM12 Type
Ambient temperature	The DOL starter (complete device) consists of a PKZM0 motor protective circuit breaker and a DILM contactor. With the adapter-less top-hat rail mounting of starters up to 15 A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical support via a mechanical connection element. Control wire guide with max. 6 conductors up to 2.5°mm external diameter or 4 conductors up to 3.5°mm external diameter. From 16 A, the motor protective circuit breaker and contactor are mounted on the top hat rail adapter plate. The connection of the main circuit between PKZ and contactor is established with electrical contact modules. When using the auxiliary contacts DILA‐XHIT… (￫ 101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact.
Rated impulse withstand voltage [Uimp]
Overvoltage category/pollution degree	IEC/EN 60947-4-1, VDE 0660
Rated operational voltage [Ue]
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	Max. 2000 m
Motor protective circuit breaker PKZM0, PKE	-25 - +55
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V
DILM contactors >Power consumption of the coil in a cold state and 1.0 x US >Sealing power [Sealing]	6000 V AC
Auxiliary contacts >Pilot Duty >AC operated	III/3
Auxiliary contacts >Pilot Duty >DC operated	230 - 415 V
Auxiliary contacts >General Use >AC	0.25 A
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >DC	PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts >General Use >DC	5.7 W
Rated operational current for specified heat dissipation [In]	1.4 CO
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	A600
Static heat dissipation, non-current-dependent [Pvs]	P300
Heat dissipation capacity [Pdiss]	600 V
Operating ambient temperature min.	15 A
Operating ambient temperature max.	250 V
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0.25 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	1.9 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	5.7 W
10.2 Strength of materials and parts >10.2.5 Lifting	1.4 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+55 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Kind of motor starter	Does not apply, since the entire switchgear needs to be evaluated.
With short-circuit release	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation power at AC-3, 230 V, 3-phase	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 460 V, 60 Hz, 3-phase	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 575 V, 60 Hz, 3-phase	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operation current Ie
Rated operation current at AC-3, 400 V
Overload release current setting	Direct starter
Rated conditional short-circuit current, type 1, 480 Y/277 V	Yes
Rated conditional short-circuit current, type 1, 600 Y/347 V	110 - 110 V
Rated conditional short-circuit current, type 2, 230 V	110 - 110 V
Rated conditional short-circuit current, type 2, 400 V	0 - 0 V
Number of auxiliary contacts as normally open contact	AC
Number of auxiliary contacts as normally closed contact	0.04 kW
Ambient temperature, upper operating limit	0.06 kW
Temperature compensated overload protection	0 kW
Release class	0 kW
Type of electrical connection of main circuit	0.21 A
Type of electrical connection for auxiliary- and control current circuit	0.25 A
Rail mounting possible	0.16 - 0.25 A
With transformer	0 A
Number of command positions	0 A
Suitable for emergency stop	50000 A
Coordination class according to IEC 60947-4-3	50000 A
Number of indicator lights	1
External reset possible	0
With fuse	60 °C
Degree of protection (IP)	Yes
Degree of protection (NEMA)	CLASS 10
Supporting protocol for TCP/IP	Screw connection
Supporting protocol for PROFIBUS	Screw connection
Supporting protocol for CAN	Yes
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	0
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	Class 2
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	IP20
Supporting protocol for PROFINET CBA	Other
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	No
Depth	No
Product Standards	No
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	No
North America Certification	No
Specially designed for North America	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.