EU5E-SWD-4DX
144060 EU5E-SWD-4DX
144060

SWD input card, 24 V DC, 4 digital inputs with 24 V power supply, 0.5A, 3 conductor connection
SmartWire-DT slave for the connection of digital input signals, automatic address setting, 4 digital inputs 24VDC, 3-wire connections with power supply 24VDC/0.5A short-circuit proof, connection with clamp-type push-in terminals

Product range	SmartWire-DT slave
Basic function	Digital modules
Function	For connection of digital I/O signals
Short Description	Inputs with supply for sensor system.
Digital	4
Connection to SmartWire-DT	yes
Standards	IEC/EN 61131-2
Approvals >Approvals	UL CSA
Approvals >shipping classification	DNV GL BV LRS
Approvals
Dimensions (W x H x D)	35 x 90 x 101 mm
Weight	0.1 kg
Mounting	Top-hat rail IEC/EN 60715, 35 mm
Mounting position	As required
Power supply >Rated operational voltage [Ue]	24 DC -15 % / +20 % V
Power supply >Residual ripple on the input voltage	≦ 5 %
Power supply >Protection against polarity reversal	Yes
Power supply >Power loss [P]	1.1 W
Climatic proofing	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Air pressure (operation)	795 - 1080 hPa
Ambient temperature >Operation [ϑ]	-25 - +55 °C
Ambient temperature >Storage / Transport [ϑ]	-40 - +70 °C
Relative humidity >Condensation	Take appropriate measures to prevent condensation
Relative humidity >Relative humidity, non-condensing (IEC/EN 60068-2-30)	5 - 95 %
Protection type (IEC/EN 60529, EN50178, VBG 4)	IP20
Vibrations (IEC/EN 61131-2:2008) >Constant amplitude 3,5 mm	5 - 8.4 Hz
Vibrations (IEC/EN 61131-2:2008) >Constant acceleration 1 g	8.4 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	9 Impacts
Drop to IEC/EN 60068-2-31 [Drop height]	50 mm
Free fall, packaged (IEC/EN 60068-2-32)	0.3 m
Overvoltage category	II
Pollution degree	2
Electrostatic discharge (IEC/EN 61131-2:2008) >Air discharge (Level 3)	8 kV
Electrostatic discharge (IEC/EN 61131-2:2008) >Contact discharge (Level 2)	4 kV
Electromagnetic fields (IEC/EN 61131-2:2008) >80 - 1000 MHz	10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008) >1.4 - 2 GHz	3 V/m
Electromagnetic fields (IEC/EN 61131-2:2008) >2 - 2.7 GHz	1 V/m
Radio interference suppression (SmartWire-DT)	EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3) >Supply cable	2 kV
Burst (IEC/EN 61131-2:2008, Level 3) >Signal lines	1 kV
Burst (IEC/EN 61131-2:2008, Level 3) >SmartWire-DT cables	1 kV
Surge (IEC/EN 61131-2:2008, Level 1) >Surge power cables	0.5 kV
Surge (IEC/EN 61131-2:2008, Level 1) >Surge I/O cables	1 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3)	10 V
Station type	SmartWire-DT slave
Setting the baud rate	automatic
Baud rate (data transfer speed)	maximum250 kbps
Status SmartWire-DT	Green LED
Connection	Plug, 8-pole Connection plug: external device plug SWD4-8SF2-5
Current consumption [Ie]	33 mA
Terminal for I/O sensor >Connection type	Push in terminals
Terminal for I/O sensor >Solid	0.2 - 1.5 (AWG 24 - 16) mm2
Terminal for I/O sensor >Flexible with ferrule	0.25 - 1.5 (AWG 24 - 16) mm2
Terminal for I/O sensor	Minimum length 8 mm
Siemens MPI, (optional)	yes
Residual ripple on the input voltage	≦ 5 %
Inputs for SmartWire-DT	Yes
Outputs to SmartWire-DT	Yes
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	1.1 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+55 °C
Degree of Protection	IP20
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supply voltage AC 50 Hz	0 - 0 V
Supply voltage AC 60 Hz	0 - 0 V
Supply voltage DC	0 - 28.8 V
Voltage type of supply voltage	DC
Number of digital inputs	4
Number of digital outputs	0
Digital inputs configurable	No
Digital outputs configurable	No
Input current at signal 1	4 mA
Permitted voltage at input	20.4 - 28.8 V
Type of voltage (input voltage)	DC
Type of digital output	None
Output current	0 A
Permitted voltage at output	0 - 0 V
Type of output voltage	DC
Short-circuit protection, outputs available	No
Number of HW-interfaces industrial Ethernet	0
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	0
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	0
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	0
Number of HW-interfaces USB	0
Number of HW-interfaces other	0
With optical interface	No
Supporting protocol for TCP/IP	No
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	No
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	Yes
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	Yes
Degree of protection (IP)	IP20
Type of electric connection	Other
Time delay at signal exchange	0 - 0 ms
Fieldbus connection over separate bus coupler possible	Yes
Rail mounting possible	Yes
Wall mounting/direct mounting	Yes
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	None
SIL according to IEC 61508	None
Performance level acc. EN ISO 13849-1	None
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	None
Explosion safety category for dust	None
Width	35 mm
Height	90 mm
Depth	97 mm
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	2324643
CSA Class No.	3211-07
North America Certification	UL listed, CSA certified
Specially designed for North America	No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.