alt
alt

EU5C-SWD-SERCOS
184982 EU5C-SWD-SERCOS
184982

SWD gateway, 99 swd modules at sercosSmartWire-DT gateway for connecting up to 99 SmartWire-DT modules to an Industrial Ethernet network and for powering the SmartWire-DT modules and switchgear. A connection to Sercos can be established using the integrated 100 Mbit/s Ethernet switch as slave. The gateway features a separate USB diagnostic interface.

SWD gateway, 99 swd modules at sercos
SmartWire-DT gateway for connecting up to 99 SmartWire-DT modules to an Industrial Ethernet network and for powering the SmartWire-DT modules and switchgear. A connection to Sercos can be established using the integrated 100 Mbit/s Ethernet switch as slave. The gateway features a separate USB diagnostic interface.

Product range SmartWire-DT coordinators
Function For connection to an SERCOS III fieldbus as a slave
Short Description Used to connect the SmartWire-DT communication system to industrial field bus systems. Powers SmartWire-DT modules and switchgear
Description SmartWire-DT gateway for connecting up to 99 SmartWire-DT modules to an Industrial Ethernet network and for powering the SmartWire-DT modules and switchgear.
A connection to SERCOS III can be established using the integrated 100 Mbit/s Ethernet switch as slave.
The gateway features a separate USB diagnostic interface (mini USB).
Accessories Connection of up to 99 SWD slaves
Standards IEC/EN 61131-2
Dimensions (W x H x D) 35 x 90 x 124 mm
Weight 0.16 kg
Mounting Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Mounting position As required
Protection type (IEC/EN 60529, EN50178, VBG 4) IP20
Vibrations (IEC/EN 61131-2:2008)
>Constant amplitude 3,5 mm
5 - 9 Hz
Vibrations (IEC/EN 61131-2:2008)
>Constant acceleration 1 g
9 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms 9 Impacts
Drop to IEC/EN 60068-2-31 [Drop height] 50 mm
Free fall, packaged (IEC/EN 60068-2-32) 1 m
Overvoltage category II
Pollution degree 2
Electrostatic discharge (IEC/EN 61131-2:2008)
>Air discharge (Level 3)
8 kV
Electrostatic discharge (IEC/EN 61131-2:2008)
>Contact discharge (Level 2)
4 kV
Electromagnetic fields (IEC/EN 61131-2:2008)
>80 - 1000 MHz
10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)
>1.4 - 2 GHz
3 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)
>2 - 2.7 GHz
1 V/m
Radio interference suppression EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3)
>Supply cable
2 kV
Burst (IEC/EN 61131-2:2008, Level 3)
>SmartWire-DT cable
1 kV
Surge (IEC/EN 61131-2:2008, Level 1)
>Supply cable
0.5 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3) 10 V
Climatic environmental conditions
>Climatic proofing
In accordance with IEC 60068-2
Climatic environmental conditions
>Ambient temperature
>Operation [ϑ]
-25 - +55 °C
Climatic environmental conditions
>Ambient temperature
>Storage [ϑ]
-40 - +70 °C
Atmospheric conditions
>Relative humidity, non-condensing (IEC/EN 60068-2-30)
5 - 95 %
Atmospheric conditions
>Air pressure (operation)
795 - 1080 hPa
Rated operational voltage [UAux] 24 V DC (-15/+20%) V
Residual ripple on the input voltage ≦ 5 %
Protection against polarity reversal Yes
Max. current [Imax] 3 A
Short-circuit rating no, external fuse FAZ Z3
Power loss [P] Normally 1 W
Potential isolation No
Rated operating voltage of 24-V-DC slaves typ. UAux - 0.2 V
Supply voltage [UPow] 24 V DC (-15/+20%) V
Input voltage ripple ≦ 5 %
Siemens MPI, (optional) yes
Rated current [I] 0.7 A
Overload proof yes
Inrush current and duration 44 A/2 ms A
Heat dissipation at 24 V DC 4.4 W
Potential isolation between UPow and 15 V SmartWire-DT supply voltage No
Bridging voltage dips 10 ms
Repetition rate 1 s
Status indication yes LED
Rated operating voltage [Ue] 14,5 ± 3 % V
max. current [Imax] 0.7 A
Short-circuit rating Yes
Connection type Push in terminals
Solid 0.2 - 1.5 mm2
Flexible with ferrule 0.25 - 1.5 mm2
UL/CSA solid or stranded 24 - 16 AWG
Station type SmartWire-DT master
Number of SmartWire-DT slaves 99
Baud Rates 125
250 kBd
Status indication SmartWire-DT master LED: red/green
Configurations LED: red/green LED
Connections Plug, 8-pole
Plug connectors Blade terminal SWD4-8MF2
Module type SERCOS slave
Protocol SERCOS III
Input data, max. 280 Byte
Output data, max. 272 Byte
Baud Rate
>Baud Rates
100 MBit/s
Station address IP
Address allocation viaSERCOS III
Status display interface [Multi colour] APL, L/A LED
Connection design for field bus 2 x RJ45 (2-channel switch)
Potential isolation Yes
Other technical data (sheet catalogue) Technical data
Notes If contactors with a total current consumption > 3 A are connected, a power feeder module EU5C-SWD-PF1/2 has to be used.
If SWD modules with a total current consumption > 0.7 A are connected, a power feeder module EU5C-SWD-PF2 has to be used.
Rated operational current for specified heat dissipation [In] 0 A
Heat dissipation per pole, current-dependent [Pvid] 0 W
Equipment heat dissipation, current-dependent [Pvid] 0 W
Static heat dissipation, non-current-dependent [Pvs] 1 W
Heat dissipation capacity [Pdiss] 0 W
Operating ambient temperature min. -25 °C
Operating ambient temperature max. +55 °C
Degree of Protection IP20
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supply voltage AC 50 Hz 0 - 0 V
Supply voltage AC 60 Hz 0 - 0 V
Supply voltage DC 20.4 - 28 V
Voltage type of supply voltage DC
Supporting protocol for TCP/IP No
Supporting protocol for PROFIBUS No
Supporting protocol for CAN No
Supporting protocol for INTERBUS No
Supporting protocol for ASI No
Supporting protocol for KNX No
Supporting protocol for MODBUS No
Supporting protocol for Data-Highway No
Supporting protocol for DeviceNet No
Supporting protocol for SUCONET No
Supporting protocol for LON No
Supporting protocol for SERCOS Yes
Supporting protocol for PROFINET IO No
Supporting protocol for PROFINET CBA No
Supporting protocol for Foundation Fieldbus No
Supporting protocol for EtherNet/IP No
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for DeviceNet Safety No
Supporting protocol for INTERBUS-Safety No
Supporting protocol for PROFIsafe No
Supporting protocol for SafetyBUS p No
Supporting protocol for other bus systems Yes
Radio standard Bluetooth No
Radio standard WLAN 802.11 No
Radio standard GPRS No
Radio standard GSM No
Radio standard UMTS No
IO link master No
System accessory Yes
Degree of protection (IP) IP20
With potential separation Yes
Fieldbus connection over separate bus coupler possible No
Rail mounting possible Yes
Wall mounting/direct mounting Yes
Front build in possible No
Rack-assembly possible Yes
Suitable for safety functions No
Category according to EN 954-1
SIL according to IEC 61508 None
Performance level acc. EN ISO 13849-1 None
Appendant operation agent (Ex ia) No
Appendant operation agent (Ex ib) No
Explosion safety category for gas None
Explosion safety category for dust None
Width 60.8 mm
Height 156.8 mm
Depth 34 mm
UL File No. E221530
UL Category Control No. NRQA
CSA File No. UL report applies to both US and Canada
North America Certification UL listed, CSA certified
Specially designed for North America No
Current Limiting Circuit-Breaker No

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.

Similar Products

DS7-34DSX200N0-D
Eaton
DS7-34DSX160N0-D
Eaton
DS7-34DSX135N0-D
Eaton
DS7-34DSX081N0-D
Eaton
NZM-XSWD-704
Eaton
DS7-34DSX100N0-D
Eaton
DS7-34DSX032N0-D
Eaton