ESR5-NE-51-24VAC-DC
118707 ESR5-NE-51-24VAC-DC
118707

Contact expansion module, 24VDC/AC, 5 enabling paths
Contact expansion module, non-delayed, to extend the contacts on safety logic modules and time function, supply voltage 24VDC or 24VAC 50/60Hz, 5 Enable current paths (IEC/EN 60204 Stop category 0) - the base unit determines the maximum safety category according to IEC 61508 and IEC 60204, 2 signal current paths, busbar tag shroud to EN 50274 with vertical actuation from the front finger- and back-of-hand proof, suitable for cat. 4 according to EN 954-1 / PL e according to EN ISO 13849-1 / SILCL3 according to IEC 62061 / SIL3 according to IEC61508, degree of protection IP20, installation location IP54 minimum, TÜV tested, rated impulse voltage 4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input current circuit and enable contacts)

Product range	Electronic safety relays
Basic function	Contact expansions
Mounting width
Operation	22.5 mm
Supply voltage [Us]	Basic isolation
Approval	single-channel
Safety related characteristics	24 V DC 24 V AC, 50/60 Hz
Enable current paths to IEC/EN 60204-1 Stop category 0
Signal current paths	Cat. 4 PL e according to EN ISO 13849-1 SILCL 3 according to IEC 62061 SIL 3 according to IEC 61508
Instructions
Intended use	5
Policies List	1
Standards	The base unit determines the maximum stop category according to IEC 61508 and IEC 60204.
Dimensions (W x H x D)
Mounting width	Safety relay contact expansion block per DIN EN60204-1/VDE 0113 Part 1 for contact multiplication. The expansion unit can be used for contact multiplication for emergency stop relays and two-hand controls.
Weight	EMV 2004/108/EG, Maschinen 2006/42/EG
Mounting position	EN ISO 13849-1:2008, EN 62061:2005+AC:2010, EN 61508, Parts 1-7:2001, EN 50178:1997, EN 60204-1:2006+A1:2009
Mounting	22.5 x 99 x 114.5 mm
Connection type	22.5 mm
Lifespan, mechanical [Operations]	0,22 kg
Terminal capacity >Solid	As required
Terminal capacity >Flexible with ferrule	Top-hat rail IEC/EN 60715, 35 mm
Terminal capacity >Solid or stranded	M3 screw terminals
Terminal screw >Pozidriv screwdriver	10 x 106
Terminal screw >Standard screwdriver	1x (0.2 – 2.5) 2x (0.2 – 1) mm2
Terminal screw >Max. tightening torque	1x (0.25 – 2.5) 2x (0.25 – 1) mm2
Stripping length	24 - 12 AWG
Material	2 Size
Duty factor	0.6 x 3.5 mm
Operating conditions >Climatic environmental conditions >Climatic proofing	0.6 Nm
Operating conditions >Ambient temperature >Operation [ϑ]	7 mm
Operating conditions >Ambient temperature >Storage [ϑ]	Housing: polyamide PA not reinforced Contacts: Material: silver tin oxide, gold plated (AgSnO2, 0.2 µm Au)
Operating conditions >Ambient temperature >Condensation	100 % DF
Operating conditions >Atmospheric conditions >relative humidity	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Operating conditions >Atmospheric conditions >Air pressure (operation)	-20 - +55 °C
Operating conditions >Atmospheric conditions >Altitude [Above sea level]	-40 - +70 °C
Power loss [P]	Non-condensing
Degree of protection to VDE 0470-1 >Enclosures	Max. 75 %
Degree of protection to VDE 0470-1 >Terminals	795 - 1080 hPa
Degree of protection to VDE 0470-1 >Degree of Protection	2000 m
Degree of protection to VDE 0470-1 >B10d [switching cycles]	5.8 W
Protection against direct contact when actuated from front (EN 50274)
Vibrations (IEC/EN 60068-2-6)	IP20
Clearance in air and creepage distances	IP20
Rated impulse withstand voltage [Uimp]	Installation location: ≥ IP54
Insulation	230000
Overvoltage category/pollution degree	Finger and back-of-hand proof
Stop category [according to EN60204-1]	10 - 150 Hz Amplitude: 0.15 mm Acceleration: 2 g
Technical safety parameters: >Values according to EN ISO 13849-1 >Performance level [according to EN ISO 13849-1]	EN 50178, UL 508, CSA C22.2, No. 14-95
Technical safety parameters: >Values according to EN ISO 13849-1 >Category [according to EN ISO 13849-1]	4000 V AC
Safety integrity level claim limit [in accordance with 62061]	Basic isolation Safe isolation, reinforced insulation and 6 kV between A1/A2, 11/12, 23/24, 71/72 and 33/34, 43/44, 53/54, 63/64.
Safety integrity level [In accordance with IEC 61508]	III/2
Probability of failure per hour [PFHd]	1,02
Prooftest High Demand	PL e
Prooftest Low Demand	Kat. 4
Rated operational voltage [Ue]	SILCL 3
Rated operational voltage [Ue]	SIL 3
Permissible range	1.02 x 10-10
Rated insulation voltage [Ui]	240 Months
Quadratic summation current	84 Months
Notes	230 V AC
Inrush current	24 V AC, 24 V DC V
Minimum switching capacity	0.85 - 1.1 x Ue
Power supply circuit >AC operated 50/60 Hz	250 V AC
Power supply circuit >DC operated	72 A2 (ITH2 = I12 + I22 + I32 + I42 + I52) A2
Rated current	Observe derating curve ￫ Engineering
Current consumption	min - max0.025 - 6 A
Pick-up time (K1, K2) for UN automatic mode, typical [tA]	0.4 W
Pick-up time (K1, K2) for UN manual operation, typical [tA]
Pick-up time	2.2 W
Reset time (K1, K2) for UN , normally [tR]	2.2 W
Simultaneity for inputs 1/2 [tsync]
Maximum switching frequency	A1, A2:92 mA
Status indication	AC: 92 DC: 92 mA
Contact type >Non-delayed enable current paths	20 ms
Contact type >Delayed signal current path	20 ms
Contact type >Feedback current path	at Ue in automatic mode: normally 20 at Ue in manual mode: normally 20 ms
Switching voltage	20 ms
Limiting continuous current	∞ ms
Short-circuit protection for output circuits, external	0.5 Hz
Output fuse >fast	Green LED
Output fuse >Miniature circuit-breaker (24 VAC/VDC)
Maximum breaking power >Resistive load (τ = 0 ms) >24 V DC	5
Maximum breaking power >Resistive load (τ = 0 ms) >Notes	1
Maximum breaking power >Resistive load (τ = 0 ms) >48 V DC	1
Maximum breaking power >Resistive load (τ = 0 ms) >Notes	min – max15 - 250 V AC 15 - 250 V DC
Maximum breaking power >Resistive load (τ = 0 ms) >110 V DC	perN/O: 6 N/C: 3 A
Maximum breaking power >Resistive load (τ = 0 ms) >220 V DC	Fuse 6 A gL/gG
Maximum breaking power >Resistive load (τ = 0 ms) >250 V AC	6
Maximum breaking power >Resistive load (τ = 0 ms) >Notes	C6
Maximum breaking power >Inductive load (τ = 40 ms) >24 V DC	144 W
Maximum breaking power >Inductive load (τ = 40 ms) >48 V DC	for N/C contact 11/12 71/72
Maximum breaking power >Inductive load (τ = 40 ms) >110 V DC	288 W
Maximum breaking power >Inductive load (τ = 40 ms) >220 V DC	for N/C contact 11/12 71/72
Switching capacity	110 W
Switching capacity >AC-15 >230 V	88 W
Switching capacity >DC-13 >24 V	1500 VA
Further information (flip catalog)	for N/C contact 11/12 71/72
Emitted interference	42 W
Interference immunity	42 W
Rated operational current for specified heat dissipation [In]	42 W
Heat dissipation per pole, current-dependent [Pvid]	42 W
Equipment heat dissipation, current-dependent [Pvid]	In accordance with IEC 60947-5-1
Static heat dissipation, non-current-dependent [Pvs]	4 A bei 360 S/h 3 A bei 3600S/h A
Heat dissipation capacity [Pdiss]	4 A bei 360 S/h 2.5 A bei 3600S/h A
Operating ambient temperature min.	description
Operating ambient temperature max.
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	In accordance with EN 61000-6-4
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	according to EN 61000-6-2
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	5.8 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	-20 °C
10.4 Clearances and creepage distances	+55 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Model	Does not apply, since the entire switchgear needs to be evaluated.
Suitable for monitoring of position switches	Does not apply, since the entire switchgear needs to be evaluated.
Suitable for monitoring of emergency-stop circuits	Is the panel builder´s responsibility.
Suitable for monitoring of valves	Is the panel builder´s responsibility.
Suitable for monitoring of optoelectronic protection equipment	Is the panel builder´s responsibility.
Suitable for monitoring of tactile sensors	Is the panel builder´s responsibility.
Suitable for monitoring of magnetic switches	Is the panel builder´s responsibility.
Suitable for monitoring of proximity switches	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of electric connection	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rail mounting possible	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 50HZ	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at AC 60HZ
Rated control supply voltage Us at DC
Voltage type for actuating	Expansion device
With detachable clamps	Yes
Evaluation inputs	Yes
With start input	No
With muting function	No
With feedback circuit	No
Release-delay	No
Number of outputs, safety related, undelayed, with contact	No
Number of outputs, safety related, delayed, with contact	Screw connection
Number of outputs, safety related, undelayed, semiconductors	Yes
Number of outputs, safety related, delayed, semiconductors	0 - 26.4 V
Number of outputs, signalling function, undelayed, with contact	0 - 0 V
Number of outputs, signalling function, delayed, with contact	0 - 0 V
Number of outputs, signalling function, undelayed, semiconductors	AC/DC
Number of outputs, signalling function, delayed, semiconductors	Yes
Category according to EN 954-1	1-channel
Type of safety acc. IEC 61496-1	No
Stop category acc. IEC 60204	No
Performance level acc. EN ISO 13849-1	Yes
SIL according to IEC 61508	0 - 0 s
With approval for TÜV	5
With approval for BG BIA	0
With approval according to UL	0
Width	0
Height	1
Depth	0
Product Standards	0
UL File No.	0
UL Category Control No.	4
CSA File No.	None
CSA Class No.	0
North America Certification	Level e
Degree of Protection	3
Characteristic curve	Yes

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.