Thermistor overload relay for machine protection, 1W , 24-240V50/60Hz, 24-240VDC, without reclosing lockoutThermistor overload relays for machine protection, supply system and error LED display, rated control voltage 24-240V 50-60Hz, 24-240V DC, without reclosing lockout, snap fitting
Thermistor overload relay for machine protection, 1W , 24-240V50/60Hz, 24-240VDC, without reclosing lockout
Thermistor overload relays for machine protection, supply system and error LED display, rated control voltage 24-240V 50-60Hz, 24-240V DC, without reclosing lockout, snap fitting
| Product range | EMT6 thermistor overload relay for machine protection |
| Function | Without manual reset Mains and fault LED display Test button |
| AC-15 >240 V [Ie] |
|
| AC--14 >300 V [Ie ] |
3 A |
| AC--14 >400 V [Ie ] |
3 A |
| AC--14 | 3 A |
| conventional thermal current [Ith] | Value applies starting with release 001. |
| Rated control voltage [Us ] | 6 A |
| Notes | 24 - 240 V 50 - 400 Hz 24 - 240 V DC V |
| Standards | Observe manual MN03407006Z-DE/EN. Can be snap fitted on a top-hat rail to IEC/EN 60715. |
| Climatic proofing | |
| Ambient temperature >Open |
IEC/EN 60947, VDE 0660, EN 55011 |
| Ambient temperature >Enclosed |
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30 |
| Ambient temperature >Storage |
-25 - +60 °C |
| Mounting position | - 25 - 45 °C |
| Weight | - 45 - 85 °C |
| Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 | As required |
| Degree of Protection | 0.15 kg |
| Protection against direct contact when actuated from front (EN 50274) | 10 g |
| Safe isolation to EN 61140 >between the contacts |
IP20 |
| Safe isolation to EN 61140 >between contacts and power supply |
Finger and back-of-hand proof |
| Rated impulse withstand voltage [Uimp] | 250 V AC |
| Rated impulse withstand voltage [Uimp] | 250 V AC |
| Overvoltage category/pollution degree | |
| Terminal capacities Auxiliary and control circuits >Solid |
4000 V AC |
| Terminal capacities Auxiliary and control circuits >Flexible with ferrule |
6000 V AC |
| Terminal capacities Auxiliary and control circuits >Solid or stranded |
Value applies starting with release 001. |
| Terminal screw | III/3 |
| Tightening torque | 1 x (0.5 - 2.5) 2 x (0.5 - 1.5) mm2 |
| Tools >Pozidriv screwdriver |
1 x (0.5 - 2.5) 2 x (0.5 - 1.5) mm2 |
| Tools >Standard screwdriver |
20 - 14 AWG |
| Rated insulation voltage [Ui ] | M3.5 |
| Rated insulation voltage [Ui ] | 1.2 Nm |
| Rated operational current [Ie
] >AC--14 >Make contact >300 V [Ie ] |
2 Size |
| Rated operational current [Ie
] >AC--14 >Make contact >380 V 400 V 415 V [Ie ] |
1 x 6 mm |
| Rated operational current [Ie
] >AC--14 >Make contact |
|
| Rated operational current [Ie
] >AC--14 >Break contact >300 V [Ie ] |
300 V |
| Rated operational current [Ie
] >AC--14 >Break contact >380 V 400 V 415 V [Ie ] |
400 V |
| Rated operational current [Ie
] >AC--14 >Break contact |
Value applies starting with release 001. |
| Rated operational current [Ie
] >AC-15 >Make contact >220 V 230 V 240 V [Ie ] |
3 A |
| Rated operational current [Ie
] >AC-15 >Make contact >300 V [Ie ] |
3 A |
| Rated operational current [Ie
] >AC-15 >Make contact >380 V 400 V 415 V [Ie ] |
Value applies starting with release 001. |
| Rated operational current [Ie
] >AC-15 >Make contact |
3 A |
| Rated operational current [Ie
] >AC-15 >Break contact >220 V 230 V 240 V [Ie ] |
3 A |
| Rated operational current [Ie
] >AC-15 >Break contact >300 V [Ie ] |
Value applies starting with release 001. |
| Rated operational current [Ie
] >AC-15 >Break contact >380 V 400 V 415 V [Ie ] |
3 A |
| Rated operational current [Ie
] >AC-15 >Break contact |
1 A |
| Max. short-circuit protective device >Fuse [gG/gL] |
1 A |
| Rated insulation voltage [Ui ] | Value applies starting with release 001. |
| Rated operational voltage [Ue ] | 3 A |
| Pick-up and drop-out values | 1 A |
| Power consumption >AC |
1 A |
| Power consumption >DC |
Value applies starting with release 001. |
| Trip at approx. | 6 A |
| Recovery at approx. | |
| Sensor circuit | 240 V |
| Electrostatic discharge (ESD) >applied standard |
240 V |
| Electrostatic discharge (ESD) >Air discharge |
0.85 - 1.1 x Ue |
| Electrostatic discharge (ESD) >Contact discharge |
3.5 VA |
| Electromagnetic fields (RFI) >applied standard |
2 W |
| Electromagnetic fields (RFI) | 3600 Ω |
| Radio interference suppression | 1600 Ω |
| Burst | Sensor circuit parameters at US and +20 °C: max. Cable length to sensor 250m (not insulated) Total cold resistance ∑ RK ≦ 1500 Ω - RT1-T2 (T1, T2 shorted): IT1-T2 = 1.9 mA - RT1-T2 (4 kΩ): UT1-T2 = max. 3 V DC, IT1-T2 = max. 0.8 mA - RT1-T2 (T1, T2 open): UT1-T2 = 5.1 V DC typ. (5.5 V DC max.) |
| power pulses (Surge) | |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | IEC/EN 61000-4-2 |
| Rated operational current for specified heat dissipation [In] | 8 kV |
| Heat dissipation per pole, current-dependent [Pvid] | 6 kV |
| Equipment heat dissipation, current-dependent [Pvid] | IEC/EN 61000-4-3 |
| Static heat dissipation, non-current-dependent [Pvs] | 80 - 1000 MHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m |
| Heat dissipation capacity [Pdiss] | EN 55011 Class B |
| Operating ambient temperature min. | Supply cables: 2 Signal cables: 1 according to IEC/EN 61000-4-4 kV |
| Operating ambient temperature max. | 2 kV (symmetrical) 4 kV (asymmetrical) according to IEC/EN 61000-4-5 |
| Type of electric connection | 10 V |
| Rated control supply voltage Us at AC 50HZ | 0 A |
| Rated control supply voltage Us at AC 60HZ | 0 W |
| Rated control supply voltage Us at DC | 0 W |
| Voltage type for actuating | 0.8 W |
| With detachable clamps | 0 W |
| Number of measuring circuits | -25 °C |
| Error registration possible | +60 °C |
| External reset possible | |
| Number of contacts as normally closed contact | |
| Number of contacts as normally open contact | Screw connection |
| Number of contacts as change-over contact | 24 - 240 V |
| Temperature measuring range | 24 - 240 V |
| Resistance measuring range | 24 - 240 V |
| Width | AC/DC |
| Height | No |
| Depth | 1 |
| Product Standards | No |
| UL File No. | No |
| UL Category Control No. | 1 |
| CSA File No. | 1 |
| CSA Class No. | 0 |
| North America Certification | 0 - 0 °C |
| Specially designed for North America | 750 - 12000 Ohm |
| Max. Voltage Rating | 23 mm |
| Degree of Protection | 84 mm |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
