EMS-DO-T-2,4-SWD
170106 EMS-DO-T-2,4-SWD
170106

DOL starter, 24 V DC, 0,18 - 2,4 A, Push in terminals, SmartWire-DT slave
DOL starter, Actuating voltage: 24 V DC, Standards: IEC/EN 60947-4-2

Product range	Electronic motor starter
Product range	SmartWire-DT slave
Subrange	SmartWire-DT electronic motor starters
Basic function	DOL starters (complete devices)
Function	For connecting to SmartWire-DT for expanded diagnostics.
Description	DOL starting Motor protection Circuit design: safety output stage with bypass, three-phase disconnect. Motor current additionally adjustable via SmartWire-DT.
Messages	Operational readiness Operating direction feedback Motor current in % Motor current in A Thermal motor image in % Overload prewarning Trip indications (overload, phase failure, etc.) Set short-circuit release value Device Type
Commands	Operating the motor starter Manual reset Automatic reset
Max. rating for three-phase motors, 50 - 60 Hz >AC-53a >380 V 400 V 415 V [P]	0.06 - 0.75 kW
Setting range of overload releases [Ir]	0,18 - 2,4 A_x
Actuating voltage	24 V DC
Connection technique	Push in terminals
Connection to SmartWire-DT	yes
Standards	IEC/EN 60947-4-2
Dimensions >Width	30 mm
Dimensions >Height	157 mm
Dimensions >Depth	124 mm
Weight	0.3 kg
Mounting	Top-hat rail IEC/EN 60715, 35 mm
Protection type (IEC/EN 60529, EN50178, VBG 4)	IP20
Mounting position	Vertical
Lifespan, electrical [Operations]	3 x 107
Max. switching frequency	7200 (pulse pause time 50:50) Operations/h
Terminal capacity >Solid	1 x (0.2 - 2.5) 1 x AWG20 - 14 mm2
Terminal capacity >flexible, with ferrule	2 x (0,2 - 2,5) 1 x AWG24 - 14 mm2
Terminal capacity >Notes	Minimum length 10 mm.
Terminal capacity >flexible, with twin ferrule	2 x (0,2 - 1,5) 2 x AWG24 - 16 mm2
Terminal capacity >Notes	Minimum length 10 mm.
Operating ambient temperature	-5 - +60, in accordance with IEC 60068-2-1 °C
Storage [ϑ]	-40 - +80 °C
Rated impulse withstand voltage [Uimp]	6000 V AC
Overvoltage category/pollution degree	III/2
Rated operational voltage [Ue ]	42 - 550 V
Rated operational current >AC-51 [Ie]	0.15 - 2.40 A
Rated operational current >AC-53a [Ie]	0.15 - 2.4 A
Heat dissipation [PV]	0.1 - 2 W
Static heat dissipation, non-current-dependent [Pvs]	1 W
Basic insulation to IEC/EN60947-1 >between feedback signal output and switch voltage	500 V AC
Current measurement >Setting range of overload releases [Ir]	0,18 - 2,4 A_x
Current measurement >Release class	10 CLASS
Current measurement >Recovery time [tW]	2 (manual startup) 20 (automatic restart) min.
Current measurement >Balance monitoring >Magnitude Imax > Irated ((Imax - Imin)/Imax)	If ≧ 33, pick-up time of 120 s If ≧ 67, pick-up time of 1.8 s %
Current measurement >Balance monitoring >Magnitude Imax < Irated ((Imax - Imin)/Irated)	If ≧ 33, pick-up time of 120 s If ≧ 67, pick-up time of 1.8 s %
Stall protection >Pick-up time I (L1) or I (L3)	33 A
Stall protection >Pick-up time	0.5 S
Short-circuit rating >Type “1” coordination >Short-circuit protective device	50 kA, 500 V AC: Fuse 16 A gG/gL 50 kA, 500 V AC: fuse 30 A CCMR 50 kA, 415 V AC: PKM0-4 15 kA, 415 V AC: PKM0-6,3 2.5 kA, 400 V AC: FAZ-B16/3
Input data >Supply voltage [UAUX]	24 (-15 - +20 %) V DC
Input data >Residual ripple on the input voltage	≦ 5 %
Input data >Input current	70 mA
Input data >Current draw inrush	120 mA
Input data >Current draw (operation) [UAUX]	50 mA
Electrostatic discharge (ESD) >applied standard	IEC EN 61000-4-2, Level 3
Electrostatic discharge (ESD) >Air discharge	8 kV
Electrostatic discharge (ESD) >Contact discharge	6 kV
Electromagnetic fields (RFI) >applied standard	IEC/EN 61000-4-3
Electromagnetic fields (RFI)	800 - 1000 MHz: 10 1.4 - 2 GHz: 10 2.0 - 2.7 GHz: 3 V/m
Radio interference suppression	EN 55011, Class A (emitted interference, line-conducted) EN 61000-6-3, Class A (emitted interference, radiated)
Note on use	This product is designed for operation in industrial environments (environment 2). The use in residential environments (environment 1) could cause electrical interference so that addition suppression must be planned.
Burst	2 IEC/EN 61000-4-4, level 3 kV
power pulses (Surge)	1 kV (symmetrical) 2 kV (asymmetrical) according to IEC/EN 61000-4-5
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	10 V
Rated operational current for specified heat dissipation [In]	2.4 A
Heat dissipation per pole, current-dependent [Pvid]	0.7 W
Equipment heat dissipation, current-dependent [Pvid]	2.1 W
Static heat dissipation, non-current-dependent [Pvs]	1 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-5 °C
Operating ambient temperature max.	+60 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Kind of motor starter	Direct starter
With short-circuit release	No
Rated control supply voltage Us at AC 50HZ	0 - 0 V
Rated control supply voltage Us at AC 60HZ	0 - 0 V
Rated control supply voltage Us at DC	24 - 24 V
Voltage type for actuating	DC
Rated operation power at AC-3, 230 V, 3-phase	0.37 kW
Rated operation power at AC-3, 400 V	0.75 kW
Rated power, 460 V, 60 Hz, 3-phase	0.736 kW
Rated power, 575 V, 60 Hz, 3-phase	0 kW
Rated operation current Ie	2.4 A
Rated operation current at AC-3, 400 V	2.4 A
Overload release current setting	0.18 - 2.4 A
Rated conditional short-circuit current, type 1, 480 Y/277 V	0 A
Rated conditional short-circuit current, type 1, 600 Y/347 V	0 A
Rated conditional short-circuit current, type 2, 230 V	0 A
Rated conditional short-circuit current, type 2, 400 V	0 A
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as normally closed contact	0
Ambient temperature, upper operating limit	60 °C
Temperature compensated overload protection	Yes
Release class	CLASS 10
Type of electrical connection of main circuit	Spring clamp connection
Type of electrical connection for auxiliary- and control current circuit	Spring clamp connection
Rail mounting possible	Yes
With transformer	No
Number of command positions	0
Suitable for emergency stop	No
Coordination class according to IEC 60947-4-3	Class 1
Number of indicator lights	4
External reset possible	Yes
With fuse	No
Degree of protection (IP)	IP20
Degree of protection (NEMA)	Other
Supporting protocol for TCP/IP	No
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	Yes
Width	30 mm
Height	157 mm
Depth	139 mm
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking
UL File No.	E29096
UL Category Control No.	NLDX, NLDX7
CSA File No.	UL report applies to both US and Canada
North America Certification	UL listed, certified by UL for use in Canada
Specially designed for North America	No
Characteristic curve

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.