EMR6-W500-D-1
184779 EMR6-W500-D-1
184779

Phase monitoring relays, On- and Off-delayed, 300 - 500 V AC, 50/60 Hz
Phase monitoring relays, Product range: EMR Measuring and monitoring relays, On- and Off-delayed, Power supply from the measuring circuit, On-delay/off-delay: none = 0 or adjustable between 0.1 - 30 s, Imbalance threshold values adjustable 2 - 25 % of mean value of phase voltages, Three-phase networks, Monitoring voltage per phase: UN= 300 - 500 V AC, 50/60 Hz V AC, Monitoring of: Phase sequence (can be deactivated), Phase failure, Overvoltage, Undervoltage, Supply voltage: 300 - 500 V AC, 50/60 Hz, Mounting position: As required, Fixing: Snap fixing, top-hat rail IEC/EN 60715, Width: 22.5 mm, Standards: IEC, UL, CSA, CCC, GL

Product range	EMR Measuring and monitoring relays
Basic function	Phase monitoring relays
Function	On- and Off-delayed
Monitoring voltage per phase [UN]	Power supply from the measuring circuit On-delay/off-delay: none = 0 or adjustable between 0.1 - 30 s Imbalance threshold values adjustable 2 - 25 % of mean value of phase voltages Three-phase networks
Monitoring of	300 - 500 V AC, 50/60 Hz V AC
Contact sequence	Phase sequence (can be deactivated) Phase failure Overvoltage Undervoltage
Supply voltage
Width	300 - 500 V AC, 50/60 Hz
Standards	22.5 mm
Lifespan, mechanical [Operations]
Climatic proofing	IEC, UL, CSA, CCC, GL
Ambient temperature >Operation >Operating ambient temperature min.	30 x 106
Ambient temperature >Operation >Operating ambient temperature max.	Damp heat, cyclical to IEC 60068-2-30: 24 h cycle, 55° C, 93% relative humidity, 96 h
Ambient temperature >Storage	-25 °C
Mounting position	+60 °C
Shock resistance	- 40 - 85 °C
Degree of protection >Terminals	As required
Degree of protection >Enclosures	Class 2
Terminal capacities >Solid	IP20
Terminal capacities >Flexible with ferrule	IP50
Standard screwdriver	1 x 0.5-2.5 (1 x 18-14 AWG) mm2
Tightening torque	2 x 0.5-1.5 (2 x 18-16 AWG) mm2
Fixing	5.5 x 0.8 mm
MTBF (mean time between failures)	0.6 - 0.8 Nm
Rated impulse withstand voltage [Uimp]	Snap fixing, top-hat rail IEC/EN 60715
Overvoltage category/pollution degree	382977 h
Supply voltage
Voltage tolerance	4000 V AC
Power consumption	III/3
Rated frequency [f]
Duty factor	300 - 500 V AC, 50/60 Hz
Response delay time	0.85 - 1.1 x Uc
Reset delay/Off-delay time	18 VA
Time error within supply voltage	50 - 60 Hz
Time error within temperature range	100 % DF
Frequency
Hysteresis	0.2 s
Frequency	Adjustable from 0.1 – 30 s
Measuring cycle	0.5 %
Temperature error	0.06 %/°C
Error within supply voltage
Supply voltage	50/60 ± 10 % Hz
Overvoltage	0…5 %
Undervoltage	50/60 ± 10 % Hz
Status indicator (LED)	50 ms
Rated operational voltage [Ue ]	0.06 %/°C
Rated operational current [Ie ] >AC-12 at 230 V [Ie ]	0.5 %
Rated operational current [Ie ] >AC-15 with 230 V [Ie]
Rated operational current [Ie ] >DC-12 at 24 V [Ie ]	LED yellow
Rated operational current [Ie ] >DC-13 at 24 V [Ie ]	LED red: F1 on
Minimum Switching capacity	LED red: F2 on
Lifespan, electrical (AC-12/230 V/4 A) [Operations] >Lifespan, electrical [Operations]	Yellow, solid: Supply voltage Yellow, solid (R/T): Relay energized Yellow, flashing (R/T): Delay time running Red, solid (F1): Overvoltage Red, solid (F2): Undervoltage Red: F1 solid, F2 flashing: Phase failure Red, flashing (F1 & F2 alternating): Phase sequence fault
Short-circuit rating >max. fuse [Fast/gL]
Electromagnetic compatibility	250 V AC
ESD [Air/contact discharge]	4 A
HF-immunity to radiation	3 A
Burst	4 A
Surge	2 A
HF-immunity to line-conducted interference	10 mA / 24 V
Operating ambient temperature min.	0.1 x 106
Operating ambient temperature max.	5 A
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material
Type of electric connection	IEC/EN 60947-6-2
With detachable clamps	IEC/EN 61000-4-2 level 3 kV
Rated control supply voltage Us at AC 50HZ	IEC/EN 61000-4-3 level 3
Rated control supply voltage Us at AC 60HZ	IEC/EN 61000-4-4 level 3
Rated control supply voltage Us at DC	IEC/EN 61000-4-5 Level 4
Voltage type for actuating	IEC/EN 61000-4-6 level 3
Phase sequence monitoring
Phase failure detection	-25 °C
Function under voltage detection	+60 °C
Function over voltage detection
Phase imbalance monitoring	Is the panel builder´s responsibility.
Voltage measurement range
Min. adjustable delay-on energization time
Max. permitted delay-on energization time	Screw connection
Min. adjustable off-delay time	No
Max. permitted off-delay time	300 - 500 V
Number of contacts as normally closed contact	300 - 500 V
Number of contacts as normally open contact	0 - 0 V
Number of contacts as change-over contact	AC
Width	Yes
Height	Yes
Depth	Yes
Product Standards	Yes
UL File No.	No
UL Category Control No.	300 - 500 V
CSA File No.	0.1 s
CSA Class No.	30 s
North America Certification	0.1 s

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.