EMR6-R400-A-2
184774 EMR6-R400-A-2
184774

Insulation monitoring relays, 0 - 400 V AC, 0 - 600 V DC, 1 - 100 kΩ
Insulation monitoring relays, Product range: EMR Measuring and monitoring relays, Status indication via LEDs, Open-circuit principle, Test or reset with button on device or with control input, Configurable fault memory/memory function, Configurable non-volatile fault memory, Wire break detection, Monitoring of: Insulation resistance in non-earthed AC supply systems (three-phase, four-phase systems), insulation resistance in non-earthed DC supply systems (three-phase systems), adjustable sensitivity range: 1 - 100 kΩ, 2 - 200 kΩ, Supply voltage: 24 - 240 V AC, 50/60 Hz, 24 - 240 V DC, Rated operating voltage for the supply system being monitored: 0 - 400 V AC, 0 - 600 V DC, Mounting position: As required, Fixing: Snap fixing, top-hat rail IEC/EN 60715, Width: 22.5 mm, Standards: IEC/EN 60255-6,

Product range	EMR Measuring and monitoring relays
Basic function	Insulation monitoring relays
Monitoring of	Status indication via LEDs Open-circuit principle Test or reset with button on device or with control input Configurable fault memory/memory function Configurable non-volatile fault memory Wire break detection
adjustable sensitivity range	Insulation resistance in non-earthed AC supply systems (three-phase, four-phase systems) insulation resistance in non-earthed DC supply systems (three-phase systems)
Contact sequence	1 - 100 kΩ 2 - 200 kΩ
Supply voltage
Rated operating voltage for the supply system being monitored	24 - 240 V AC, 50/60 Hz 24 - 240 V DC
Width	0 - 400 V AC 0 - 600 V DC
Standards	22.5 mm
Lifespan, mechanical [Operations]
Climatic proofing	IEC/EN 60255-6,
Ambient temperature >Operation >Operating ambient temperature min.	30 x 106
Ambient temperature >Operation >Operating ambient temperature max.	Damp heat, cyclical to IEC 60068-2-30: 24 h cycle, 55° C, 93% relative humidity, 96 h
Ambient temperature >Storage	-25 °C
Mounting position	+60 °C
Shock resistance	- 40 - 85 °C
Degree of protection >Terminals	As required
Degree of protection >Enclosures	Class 2
Terminal capacities >Solid	IP20
Terminal capacities >Flexible with ferrule	IP50
Standard screwdriver	1 x 0.5-2.5 (1 x 18-14 AWG) mm2
Tightening torque	2 x 0.5-1.5 (2 x 18-16 AWG) mm2
Fixing	5.5 x 0.8 mm
MTBF (mean time between failures)	0.5 - 0.8 Nm
Rated impulse withstand voltage [Uimp]	Snap fixing, top-hat rail IEC/EN 60715
Overvoltage category/pollution degree	321127 h
Supply voltage
Voltage tolerance	4000 V AC
Power consumption	III/3
Rated frequency [f]
Duty factor	24 - 240 V AC, 50/60 Hz 24 - 240 V DC
Hysteresis >Hysteresis, max.	0.85 - 1.1 x Uc
Cable length for cancellation- and test button	3.5 VA
Supply voltage	50 - 60 Hz
Fault at L+	100 % DF
Fault at L-
Status indicator (LED)	25 %
Rated operational current [Ie ] >AC-12 at 230 V [Ie ]	10 m
Rated operational current [Ie ] >AC-15 with 230 V [Ie]
Rated operational current [Ie ] >DC-13 at 24 V [Ie ]	LED, green
Lifespan, electrical (AC-12/230 V/4 A) [Operations] >Lifespan, electrical [Operations]	LED, red
Short-circuit rating >max. fuse [Fast/gL]	LED, red
Electromagnetic compatibility	Green, solid: Supply voltage Other states depending on fault (see IL): Measured value
ESD [Air/contact discharge]
HF-immunity to radiation	5 A
Burst	3 A
Surge	2.5 A
HF-immunity to line-conducted interference	0.1 x 106
Operating ambient temperature min.	5 A
Operating ambient temperature max.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	IEC/EN 60947-6-2
Type of electric connection	IEC/EN 61000-4-2 level 3 kV
Rated control supply voltage Us at AC 50HZ	IEC/EN 61000-4-3 level 3
Rated control supply voltage Us at AC 60HZ	IEC/EN 61000-4-4 level 3
Rated control supply voltage Us at DC	IEC/EN 61000-4-5 Level 4
Voltage type for actuating	IEC/EN 61000-4-6 level 3
With detachable clamps
Function	-25 °C
Rated voltage	+60 °C
Rated frequency
Line capacity	Is the panel builder´s responsibility.
Response value impedance 1
Response value impedance 2
Indication of insulation value	Screw connection
Error registration possible	24 - 240 V
Number of contacts as normally closed contact	24 - 240 V
Number of contacts as normally open contact	24 - 240 V
Number of contacts as change-over contact	AC/DC
Width	No
Height	For mixed system
Depth	0 - 400 V
Product Standards	15 - 400 Hz
UL File No.	20 µF
UL Category Control No.	1 - 100 kOhm
CSA File No.	1 - 200 kOhm
CSA Class No.	No
North America Certification	Yes
Characteristic curve	0
Characteristic curve	0
Characteristic curve	2
Characteristic curve	45 mm

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.