EMR6-I15-B-1
184755 EMR6-I15-B-1
184755

Overcurrent monitor, Current measuring range: 0.3 - 1.5 A, 1 - 5 A, 3 - 15 A, Supply voltage: 220 - 240 V AC, 50/60 Hz
Current monitoring relays, Product range: EMR Measuring and monitoring relays, Monitoring of single-phase DC and AC networks, On delay: None = 0 or adjustable from 0.1 to 30 s, Extension of the measurement range possible with current transformers, Monitoring of: Overcurrent, Undercurrent, Current measuring range: I∼/I= 0.3 - 1.5 A, 1 - 5 A, 3 - 15 A A, Supply voltage: 220 - 240 V AC, 50/60 Hz, Mounting position: As required, Fixing: Snap fixing, top-hat rail IEC/EN 60715, Width: 22.5 mm, Standards: UL 508, CAN/CSA C22.2 No.14, GL, EAC, CCC, RMRS

Product range	EMR Measuring and monitoring relays
Basic function	Current monitoring relays
Monitoring of	Monitoring of single-phase DC and AC networks On delay: None = 0 or adjustable from 0.1 to 30 s Extension of the measurement range possible with current transformers
Current measuring range [I∼/I=]	Overcurrent Undercurrent
Contact sequence	0.3 - 1.5 A 1 - 5 A 3 - 15 A A
Supply voltage
Width	220 - 240 V AC, 50/60 Hz
Standards	22.5 mm
Lifespan, mechanical [Operations]
Climatic proofing	UL 508, CAN/CSA C22.2 No.14, GL, EAC, CCC, RMRS
Ambient temperature >Operation >Operating ambient temperature min.	30 x 106
Ambient temperature >Operation >Operating ambient temperature max.	Damp heat, cyclical to IEC 60068-2-30: 24 h cycle, 55° C, 93% relative humidity, 96 h
Ambient temperature >Storage	-25 °C
Mounting position	+60 °C
Shock resistance	- 40 - 85 °C
Degree of protection >Terminals	As required
Degree of protection >Enclosures	Class 2
Terminal capacities >Solid	IP20
Terminal capacities >Flexible with ferrule	IP50
Standard screwdriver	1 x 0.5-2.5 (1 x 18-14 AWG) mm2
Tightening torque	2 x 0.5-1.5 (2 x 18-16 AWG) mm2
Fixing	4 x 0.8 mm
MTBF (mean time between failures)	0.6 - 0.8 Nm
Rated impulse withstand voltage [Uimp]	Snap fixing, top-hat rail IEC/EN 60715
Overvoltage category/pollution degree	382467 h
Supply voltage
Voltage tolerance	4000 V AC
Power consumption	III/3
Rated frequency [f]
Duty factor	220 - 240 V AC, 50/60 Hz
Reset delay/Off-delay time	0.85 - 1.1 x Uc
Time error within supply voltage	2.6 VA
Time error within temperature range	50 - 60 Hz
Inputs >B1-C	100 % DF
Inputs >B2-C
Inputs >B3-C	Adjustable from 0.1 – 30 s
Hysteresis	0.5 %
Measuring cycle	0.06 %/°C
Temperature error
Error within supply voltage	0.3 - 1.5 A
Supply voltage	1 - 5 A
Output relay energized	3 - 15 A
Measured value	3…30 %
Status indicator (LED)	80 ms
Rated operational voltage [Ue ]	0.06 %/°C
Rated operational current [Ie ] >AC-12 at 230 V [Ie ]	0.5 %
Rated operational current [Ie ] >AC-15 with 230 V [Ie]
Rated operational current [Ie ] >DC-12 at 24 V [Ie ]	LED, green
Rated operational current [Ie ] >DC-13 at 24 V [Ie ]	LED, yellow
Minimum Switching capacity	LED, red
Lifespan, electrical (AC-12/230 V/4 A) [Operations] >Lifespan, electrical [Operations]	Green, solid: Supply voltage Green, flashing: Release delay active Yellow, solid: Output relay excited Red, flashing: Undercurrent
Short-circuit rating >max. fuse [Fast/gL]
Electromagnetic compatibility	250 V AC
ESD [Air/contact discharge]	4 A
HF-immunity to radiation	3 A
Burst	4 A
Surge	2 A
HF-immunity to line-conducted interference	10 mA / 24 V
Operating ambient temperature min.	0.1 x 106
Operating ambient temperature max.	10 A
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material
Type of electric connection	IEC/EN 60947-6-2
With detachable clamps	IEC/EN 61000-4-2 level 3 kV
Single-phase under current possible	IEC/EN 61000-4-3 level 3
Three-phase under current possible	IEC/EN 61000-4-4 level 3
Single-phase over current possible	IEC/EN 61000-4-5 Level 4
Three-phase over current possible	IEC/EN 61000-4-6 level 3
Single-phase hysteresis possible
Three-phase hysteresis possible	-25 °C
Contains function DC-voltage under current	+60 °C
Contains function DC-voltage over current
Function DC-current hysteresis	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ
Rated control supply voltage Us at AC 60HZ
Rated control supply voltage Us at DC	Screw connection
Voltage type for actuating	No
Current measurement range	Yes
Min. adjustable delay-on energization time	No
Max. permitted delay-on energization time	Yes
Min. adjustable off-delay time	No
Max. permitted off-delay time	No
Number of contacts as normally closed contact	No
Number of contacts as normally open contact	Yes
Number of contacts as change-over contact	Yes
External current transformer	No
Width	220 - 240 V
Height	220 - 240 V
Depth	220 - 240 V
Product Standards	AC/DC
UL File No.	0.3 - 15 A
UL Category Control No.	0.1 s
CSA File No.	30 s
CSA Class No.	0 s
North America Certification	0 s

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.