EC4P-222-MTAX1
106404 EC4P-222-MTAX1
106404

Compact PLC, 24 V DC, 12DI(of 4AI), 8DO(T), 1AO, ethernet, CAN
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Description	Expandable: Inputs/outputs and bus systems individual laser inscription possible with EC4-COMBINATION-*
Digital	easyNet/CANopen® and Ethernet on board
of which can be used as analog
Transistor	12
Analog	4
Supply voltage
Dimensions (W x H x D)	8
Weight	1
Mounting	24 V DC
Solid
Flexible with ferrule	107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Standard screwdriver	0.3 kg
Max. tightening torque	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Operating ambient temperature
Condensation	0.2/4 (AWG 22 - 12) mm2
LCD display (clearly legible)	0.2/2.5 (AWG 22 - 12) mm2
Storage [ϑ]	0.8 x 3.5 mm
Relative humidity, non-condensing (IEC/EN 60068-2-30)	0.6 Nm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm	Take appropriate measures to prevent condensation
Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g	0 - 55 °C
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height]	5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32)	1080 - 1080 hPa
Mounting position
Overvoltage category/pollution degree	IP20
Electrostatic discharge (ESD) >applied standard	10 - 57 Hz
Electrostatic discharge (ESD) >Air discharge	57 - 150 Hz
Electrostatic discharge (ESD) >Contact discharge	18 Impacts
Electromagnetic fields (RFI) to IEC EN 61000-4-3	50 mm
Radio interference suppression	1 m
Burst	Vertical or horizontal
Burst >Supply cable
Burst >Signal lines	II/2
power pulses (Surge)	IEC EN 61000-4-2, Level 3
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	8 kV
Clearance in air and creepage distances	6 kV
Insulation resistance	10 V/m
Back-up of real-time clock	EN 55011 Class B, EN 55022 Class B
Accuracy of the real-time clock	IEC/EN 61000-4-4, level 3 kV
Write cycles of the retentive memory	2 kV
Rated operational voltage [Ue]	2 kV
Permissible range [Ue]	2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5
Residual ripple	10 V
Input current
Voltage dips	EN 50178, UL 508, CSA C22.2, No. 142
Heat dissipation [P]	EN 50178
Processor
Memory >Program code/data
Memory >Marker/retentive data	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Cycle time for 1 k of instructions (Bit, Byte)	part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232 >Data transfer rate
PRG interface RS232 >Connection types	10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232 >Potential isolation
PRG interface RS232 >Master mode >Data transfer rate	24 DC (-15/+20%) V
PRG interface RS232 >Master mode >Character formats	20.4 - 28.8 V DC
PRG interface RS232 >Master mode >Number of transmission bytes in a block	≦ 5 %
PRG interface RS232 >Master mode >Number of received bytes in a block	normally 140 mA at Ue
Ethernet >Data transfer rate	≤ 10 (IEC/EN 61131-2) ms
Ethernet >Connection types	Normally 3.4 W
Ethernet >Potential isolation
CANopen® >Data transfer rate	Infineon XC161
CANopen® >Bus termination (first and last station)	256/14 segments of 16 KB each kByte
CANopen® >Connection types	16/4/4/8 KByte
Master mode >Number	< 0.3 ms
Mode slave >Stations
Mode slave >PDO type	4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Mode slave >Control contact rated current	RJ45-bus
Number	none
Inputs can be used as analog inputs	0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Status Display	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Potential isolation	190 bytes
Rated operational voltage [Ue]	190 bytes
Input voltage	10 MBit/s, 100 m Mbit/s
Input current on 1 signal >Input current at signal 1	RJ45
Deceleration time	No
Cable length	500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter >Number of counter inputs	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter >Value range	2 x RJ45, 8 pole
Incremental counter >Counter frequency	8
Incremental counter >Pulse shape	max. 126 Number
Incremental counter >Counter inputs	Asynchronous, cyclic, acyclic
Incremental counter >Reference input	To DS 301 V4
Incremental counter >Input for reference switch
Incremental counter >Counter inputs I1 and I2, I3 and I4	12
Incremental counter >Signal offset	4 (I7, I8, I11, I12)
Rapid counter inputs >Number	LCD-Display
Rapid counter inputs >Value range	from the outputs: yes to network easyNet, easyLink
Rapid counter inputs >Cable length	24 V DC
Rapid counter inputs >Counter frequency	< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0" > 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Rapid counter inputs >Pulse shape	3.3 (I1 to I6) 2.2 (I7, I8) 3.3 (I9, I10) 2.2 (I11, I12) mA
Number	normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Potential isolation	100 (unshielded) m
Input type	1 (I1, I2, I3, I4)
Signal range	32 Bit
Resolution	≦ 40 kHz
Input impedance	Square
Accuracy of actual value >Within a single device	I1, I2
Conversion time, analog/digital	I3
Input current	I4
Cable length	1
Number	90°
Output type	2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Max. output current	16/32 Bit
Load resistance	≦ 20 (screened) m
Overload and short-circuit protection	≦ 50 kHz
Resolution	Square
Recovery time
Accuracy >-25 °C - 55 °C	4 (I7, I8, I11, I12)
Accuracy >25°C	from the outputs: yes to interface/memory card: no
Conversion time, analog/digital	DC voltage
Number	0-10 V DC
Rated operational voltage [Ue]	0.01 V analog 0.01 V digital 10 Bit (value 0 - 1023)
Permissible range [Ue]	11.2 kΩ
Residual ripple	± 2, (I7, I8, I11, I12) ± 0.12 V %
Supply current	each CPU cycle ms
Protection against polarity reversal	< 1 mA
Potential isolation	≦ 30, screened m
Rated operational current at signal „1” DC per channel [Ie]
Lamp load without Rv per channel	1
Residual current on 0 signal per channel	DC voltage
Max. output voltage	0.01 A
Short-circuit protection	1 kΩ
Short-circuit tripping current for Ra ≦ 10 mΩ	Yes
Total short-circuit current	0.01 V DC analog 10 Bit (value 0 - 1023) digital
Peak short-circuit current	100 µs
Thermal cutout	2 %
Max. operating frequency with constant resistive load	1 %
Parallel connection of outputs >With resistive load, inductive load with external suppressor circuit, combination within a group	each CPU cycle ms
Parallel connection of outputs >Number of outputs [max.]
Parallel connection of outputs >Max. total current	8
Output status indication	24 V DC
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Utilization factor	20.4 - 28.8 V DC
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Duty factor	5 %
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	Norm./max. 18/32 at signal 0 24/44 at signal 1 mA
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Utilization factor	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Duty factor	from power supply, inputs to the memory card: yes From the inputs: yes
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	Max. 0.5 A
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Utilization factor	5 W
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Duty factor	< 0.1 mA
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	2.5 (signal 0 at external load < 10 MΩ) U = Ue - 1 V (signal 1 at Ie = 0.5 A) V
Inductive load to EN 60947-5-1 >With external suppressor circuit >Utilization factor	Yes, electronic (Q1 - Q4), thermal (Q5 - Q8), (analysis via diagnostics input I16, I15)
Inductive load to EN 60947-5-1 >With external suppressor circuit >Duty factor	0.7 ≦ Ie ≦ 2 per output A
Inductive load to EN 60947-5-1 >With external suppressor circuit >Max. switching frequency, max. duty factor	16 A
Protection against polarity reversal	32 A
Potential isolation	Yes
Bus termination (first and last station)	40000 Operations/h
Rated operational current for specified heat dissipation [In]	Group 1: Q1 - Q4 Group 2: Q5 - Q8
Heat dissipation per pole, current-dependent [Pvid]	4
Equipment heat dissipation, current-dependent [Pvid]	2 (Caution! Outputs must be actuated simultaneously and for the same length of time.) A
Static heat dissipation, non-current-dependent [Pvs]	LCD-display
Heat dissipation capacity [Pdiss]	0.25 g
Operating ambient temperature min.	100 % DF
Operating ambient temperature max.	1500 Operations
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0.25 g
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	100 % DF
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	1500 Operations
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0.25 g
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	100 % DF
10.2 Strength of materials and parts >10.2.5 Lifting	1500 Operations
10.2 Strength of materials and parts >10.2.6 Mechanical impact	1 g
10.2 Strength of materials and parts >10.2.7 Inscriptions	100 % DF
10.3 Degree of protection of ASSEMBLIES	Depending on the suppressor circuit Operations
10.4 Clearances and creepage distances
10.5 Protection against electric shock	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
10.6 Incorporation of switching devices and components	Yes
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.9 Insulation properties >10.9.2 Power-frequency electric strength
10.9 Insulation properties >10.9.3 Impulse withstand voltage	0 A
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	0 W
10.10 Temperature rise	0 W
10.11 Short-circuit rating	3.4 W
10.12 Electromagnetic compatibility	0 W
10.13 Mechanical function	-25 °C
Contains function building blocks	+55 °C
Contains basic device
Contains module rack	Meets the product standard´s requirements.
Contains power supply	Meets the product standard´s requirements.
Contains analogue input module	Meets the product standard´s requirements.
Contains analogue output module	Meets the product standard´s requirements.
Contains digital input module	Meets the product standard´s requirements.
Contains digital output module	Does not apply, since the entire switchgear needs to be evaluated.
Contains function module	Does not apply, since the entire switchgear needs to be evaluated.
Contains technology module	Meets the product standard´s requirements.
Contains communication module	Meets the product standard´s requirements.
Contains memory unit	Meets the product standard´s requirements.
Contains simulation module	Does not apply, since the entire switchgear needs to be evaluated.
Contains connection cable	Does not apply, since the entire switchgear needs to be evaluated.
Contains control unit	Is the panel builder´s responsibility.
Contains monitor	Is the panel builder´s responsibility.
Contains programming software	Is the panel builder´s responsibility.
Contains engineering software	Is the panel builder´s responsibility.
Contains visualization	Is the panel builder´s responsibility.
Contains libraries	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains documentation	Is the panel builder´s responsibility.
Contains other components	Is the panel builder´s responsibility.
Software preinstalled	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Product Standards
UL File No.
UL Category Control No.	Yes
CSA File No.	Yes
CSA Class No.	No
North America Certification	Yes
Specially designed for North America	Yes
Current Limiting Circuit-Breaker	Yes
Degree of Protection	Yes

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.