Switched-mode power supply unit, 100-240VAC/24VDC, 1.25A, 1-phase, controlledThe primary cycled and controlled switched-mode power supply units supply a safe low voltage (SELV according to EN60950) with radio interference level B according to EN55011 and EN55022. They have been tested for use in industrial as well as public networks. Overload safety and permanent short-circuit strength ensure for a high safety of the devices. Rated input voltage at 50/60 Hz: 100-240VAC, rated output voltage: 24VDC with a residual ripple of ±3% rated output current: 1.25A, outputs cannot be connected in parallel
Switched-mode power supply unit, 100-240VAC/24VDC, 1.25A, 1-phase, controlled
The primary cycled and controlled switched-mode power supply units supply a safe low voltage (SELV according to EN60950) with radio interference level B according to EN55011 and EN55022. They have been tested for use in industrial as well as public networks. Overload safety and permanent short-circuit strength ensure for a high safety of the devices. Rated input voltage at 50/60 Hz: 100-240VAC, rated output voltage: 24VDC with a residual ripple of ±3% rated output current: 1.25A, outputs cannot be connected in parallel
| Product range | Control relays easyE4 Control relay easyRelay Multi-function-display MFD-Titan |
| Product range | Switched-mode power supply units easyPOW |
| Description | primary chopper controlled |
| Phases | Single-phase |
| Input voltage range | 85 - 264 V AC |
| Nominal input voltage | 100 - 240 V AC |
| Rated output voltage | 24 V DC (± 3%) |
| Rated output current | 1.25 A |
| For use with | easy500 easy700 easy800 MFD-CP8 EC4P ES4P easyE4 |
| Description | for DMI module |
| Standards | |
| Dimensions (W x H x D) | EN 55011, EN 55022, IEC/EN 61000-4, IEC 60068-2-6, IEC 60068-2-27 |
| Weight | 71.5 (4 PE) x 90 x 58 mm |
| Mounting | 0.25 kg |
| Solid | Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories) |
| Flexible with ferrule | |
| Standard screwdriver | 0.2/4 (AWG 22 - 12) mm2 |
| Max. tightening torque | 0.2/2.5 (AWG 22 - 12) mm2 |
| Operating ambient temperature | 0.8 x 3.5 mm |
| Condensation | 0.6 Nm |
| Storage | |
| Relative humidity, non-condensing (IEC/EN 60068-2-30) >Air humidity, non-condensing, min. |
-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C |
| Relative humidity, non-condensing (IEC/EN 60068-2-30) >Air humidity, non-condensing, max. |
Take appropriate measures to prevent condensation |
| Air pressure (operation) | - 40 - 70 °C |
| Max. installation altitude above sea level, observe derating with higher altitudes | 5 % |
| Protection type (IEC/EN 60529, EN50178, VBG 4) | 95 % |
| Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm |
795 - 1080 hPa |
| Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g |
2000 m |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms | |
| Drop to IEC/EN 60068-2-31 [Drop height] | IP20 |
| Free fall, packaged (IEC/EN 60068-2-32) | 10 - 57 Hz |
| Mounting position | 57 - 150 Hz |
| Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD) >Air discharge |
18 Impacts |
| Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD) >Contact discharge |
50 mm |
| Electromagnetic fields (RFI) to IEC EN 61000-4-3 | 1 m |
| Radio interference suppression | Vertical or horizontal |
| Burst pulses (IEC/EN 61000-4-4, level 3) | |
| Power pulses (surge) (IEC/EN 61000-4-5) | 8 kV |
| High-energy pulses (surge) (IEC/EN 61000-4-5, level 2), 24 V | 6 kV |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | 10 V/m |
| Surge voltage (EN 50178), 24 V | EN 55011 Class B, EN 55022 Class B |
| Clearance in air and creepage distances | 2 kV |
| Insulation resistance | 2 (supply cables, symmetrical) kV |
| Protection class Uout to Uin | 0.5 (outgoer cables symmetrical, EASY…DC) kV |
| Potential isolation primary/secondary | 10 V |
| Rated voltage | 6 kV |
| Protective switches AC | |
| Voltage range | EN 50178 |
| Frequency range | EN 50178 |
| Mains failure bridging 115/230 V (IEC/EN 61000-4-11) | Class II to IEC 60536 |
| Fuse 115/230 V | Yes, SELV (VDE 0100 Part 410; IEC 60364-4-41, HD 384.4.41 S2) EN 60950, EN 50178 |
| Efficiency | |
| Power consumption | 100/120/230/240 (-15/+10 %) V |
| Power loss [P] | FAZ-C2/1 or FAZ-B6/1 |
| Input current nominal 115/240 V | 85 - 264 V AC |
| Inrush current at 25 °C 230 V | 47 - 63 Hz |
| 24 V DC >Rated value |
> 20/> 40 ms |
| 24 V DC >Tolerance |
2/1 slow A |
| 24 V DC >Switching peaks 115/230 |
|
| 24 V DC >Effect of input voltage |
> 83 % |
| 24 V DC >Effect with 25 - 100 % load change |
Normally 35 W |
| 24 V DC >Can be connected in parallel to increase power |
Normally 5 W |
| 24 V DC >Output current |
|
| 24 V DC >Effectiveness of current limitation |
Approx. 0.6/0.3 A |
| 24 V DC >Reduction of output voltage after current limitation |
< 18 A |
| 24 V DC >Overload proof |
|
| 24 V DC >Proof against sustained short circuit |
24 V DC |
| Lamp load, cold, 24 V DC | ± 3 % |
| Base load present | < 5 mVPP |
| Behaviour on emergency-stop in 24 V circuit, disconnection with contactor (contactor load, no damage) | ± 1 % |
| Indication of output voltage (LED, continuous green light = OK) | ± 2 % |
| Static heat dissipation, non-current-dependent [Pvs] | Yes |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 0 - 1.25 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
> 1.5 A |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
< 18 V |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Yes, by current limitation |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Yes, hickup mode, approx. 2 Hz |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
| 10.2 Strength of materials and parts >10.2.5 Lifting |
10 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
5 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
30 W |
| 10.3 Degree of protection of ASSEMBLIES | |
| 10.4 Clearances and creepage distances | 24 V DC |
| 10.5 Protection against electric shock | |
| 10.6 Incorporation of switching devices and components | 5 W |
| 10.7 Internal electrical circuits and connections | -25 °C |
| 10.8 Connections for external conductors | +55 °C |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
|
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Input voltage at AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Input voltage at AC 60 Hz | Meets the product standard´s requirements. |
| Input voltage at DC | Meets the product standard´s requirements. |
| Type of voltage (input voltage) | Meets the product standard´s requirements. |
| Max. input current AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Max. input current AC 60 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Max. input current DC | Is the panel builder´s responsibility. |
| Type of output voltage | Is the panel builder´s responsibility. |
| Output voltage at AC 50 Hz | Is the panel builder´s responsibility. |
| Output voltage at AC 60 Hz | Is the panel builder´s responsibility. |
| Output voltage at DC | Is the panel builder´s responsibility. |
| Max. output current AC 50 Hz | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Max. output current AC 60 Hz | Is the panel builder´s responsibility. |
| Max. output current DC | Is the panel builder´s responsibility. |
| Power output | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Redundancy | |
| Suitable for safety functions | |
| Width | 85 - 264 V |
| Height | 85 - 264 V |
| Depth | 0 - 0 V |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
