XN-322-20DI-PCNT
178767 XN-322-20DI-PCNT
178767

Digital input module; 20 digital inputs 24 V DC each; pulse-switching; 2/4 CNT; 25 kHz
Digital I/O module with sixteen 24 VDC / 3.7 mA (EN 61131-2 type 1) inputs with a 0.5 ms input filter. An additional four 24 VDC / 3.7 mA (EN 61131-2 type 1) inputs with a 0.01 ms input filter can be used as four 8-bit or two 16-bit counters with an input frequency of up to 25 kHz.

Function	XN300 I/O slice modules
Connection technique	Push-in spring-cage terminal
Function	XN-322 digital input module for XN300
Short Description	20 digital inputs 24 V DC each, pulse-switching, 2/4 CNT, 25 kHz
For use with	XN-312-…
Standards
Approvals >Approvals	IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4
Approvals >shipping classification	CE, cULus EAC
Approvals	DNV GL
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	8 / 4 kV
Electromagnetic compatibility (EMC) >Burst >Supply cable	10 / 3 / 1 V/m
Electromagnetic compatibility (EMC) >Burst >Signal cable	2 kV
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced)	1 kV
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced)	0,5 / 0,5 kV
Electromagnetic compatibility (EMC) >Radiated RFI	1 kV
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	10 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	40 / 47 class A dB
Ambient conditions >Climatic conditions >Climatic proofing	Yes / 10 ms
Ambient conditions >Climatic conditions >Air pressure (operation)	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Ambient conditions >Climatic conditions >Relative humidity	795 - 1080 hPa
Ambient conditions >Climatic conditions >Condensation	0 - 95%, non condensing
Ambient conditions >Temperature >Operation	prevent with suitable measures
Ambient conditions >Temperature >Storage, transport [ϑ]	0 - +55 °C
Degree of Protection	-20 - +85 °C
Mounting position	IP20
Free fall, packaged (IEC/EN 60068-2-32)	Horizontal
Vibrations [3,5 mm / 1 g]	1 m
Mechanical shock resistance [Semisinusoidal 15 g/11 ms]	5 - 8.4 / 8.4 -150 Hz
Rated operational data >Insulating material group	18 Impacts
Rated operational data >Overvoltage category / pollution degree
Rated operational data >Rated operating voltage	I
Rated operational data >Maximum load current/cross-sectional area	III / 3
Connection design in TOP direction	160 V
Stripping length	X (not specified by plug manufacturer) A / mm²
Gauge pin IEC/EN 60947-1	Push-in spring-cage terminal (plug-in connection)
Connection specifications >"e" solid H07V-U	10 mm
Connection specifications >"f" flexible H 07V-K	A1
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >Cable size	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I]	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +24 V power supply [I]	24 - 16 AWG
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)]
Heat dissipation >Heat dissipation (without active channels)	(typ.)40 mA
Heat dissipation >Max. heat dissipation	(typ.)none mA
Heat dissipation >Notes on heat dissipation	no
Channels	0.225 W
Input voltage >Nominal input voltage [Ue]	3.012 W
Input voltage >Low level [UeL]	The max. heat dissipation is specified as the maximum power produced inside the device´s housing.
Input voltage >High level [UeH]
Input current >Input current, nominal value [Ie]	16 Number
Input current >Low level⁄active level [IeL]	24 V DC
Input current >High level⁄active level [IeH]	0 < UeL < +8 V
Input delay >tRising edge	+14 < UeH < +30 V
Input delay >tFalling edge	3.7 mA
Potential isolation	≤1.1 mA
Heat dissipation (per active channel)	≥2.3 mA
Channels	< 500 µs
Input voltage >Input voltage, nominal value [Ue]	< 500 µs
Input voltage >Low level [UeL]	no Input to input
Input voltage >High level [UeH]	0.088 W
Input current >Input current, nominal value [le]
Input current >Low level⁄active level [leL]	4 Quantity
Input current >High level⁄active level [IeH]	24 V DC
Input delay >trising edge	0 < UeL < +8 V
Input delay >tfalling edge	+14 < UeH < +30 V
Input delay >Potential isolation	3.7 mA
Input delay >Heat dissipation (per active channel)	≤1.1 mA
Notes on digital inputs	≥2.3 mA
Counting mode >Operate Mode	10 µs
Counting mode >Channels	10 µs
Counting mode >Resolution	no Input to input
Counting mode >Input frequency [fmax]	0.088 W
Counting mode >Signal analysis	Inputs as per EN61131-2 Type 1
Counting mode >Counter frequency [fmax]
Counting mode >Operate Mode	Counter mode
Counting mode >Channels	4 Quantity
Counting mode >Resolution	8 Bit
Counting mode >Input frequency [fmax]	25 kHz
Counting mode >Signal analysis	X1 encoding
Counting mode >Counter frequency [fmax]	25 kHz
Counting mode >Notes on operating mode	Incremental encoder (A, B)
Rated operational current for specified heat dissipation [In]	2 Quantity
Heat dissipation per pole, current-dependent [Pvid]	16 Bit
Equipment heat dissipation, current-dependent [Pvid]	25 kHz
Static heat dissipation, non-current-dependent [Pvs]	4X encoding
Heat dissipation capacity [Pdiss]	100 kHz
Operating ambient temperature min.	Inputs configurable in pairs
Operating ambient temperature max.
Degree of Protection	0 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	3.012 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	IP20
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	Is the panel builder´s responsibility.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Number of digital inputs	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of digital outputs	Is the panel builder´s responsibility.
Digital inputs configurable	Is the panel builder´s responsibility.
Digital outputs configurable	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Input current at signal 1
Permitted voltage at input
Type of voltage (input voltage)	0 - 0 V
Type of digital output	0 - 0 V
Output current	18 - 30 V
Permitted voltage at output	DC
Type of output voltage	20
Short-circuit protection, outputs available	0
Number of HW-interfaces industrial Ethernet	Yes
Number of interfaces PROFINET	No
Number of HW-interfaces RS-232	2.3 mA
Number of HW-interfaces RS-422	14 - 30 V
Number of HW-interfaces RS-485	DC
Number of HW-interfaces serial TTY	None
Number of HW-interfaces parallel	1.7 A
Number of HW-interfaces Wireless	0 - 0 V
Number of HW-interfaces USB	DC
Number of HW-interfaces other	No
With optical interface	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	1
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Degree of protection (IP)	No
Type of electric connection	No
Time delay at signal exchange	Yes
Fieldbus connection over separate bus coupler possible	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	Yes
SIL according to IEC 61508	IP20
Performance level acc. EN ISO 13849-1	Spring clamp connection
Appendant operation agent (Ex ia)	0 - 0.2 ms
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	Yes
Explosion safety category for dust	No
Width	No
Height	No
Depth	No
Product Standards	None
UL File No.	None

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.