Flow sensorsT-Easic FTS, FTS-I060F14BWetted parts: Stainless steel 1.4404 (Ra ≤ 0,8 µm)Process connection: Without process connection (adapter needed for installation)Output signal: 2 push-pull digital outputs (Q1 configurable for IO-Link; Q2 configurable as analog output (4 … 20 mA) / pulse output / digital input) for flow and temperatureProcess temperature: –40 °C ... +150 °CProcess pressure: –1 bar ... 100 bar, 40 bar (with SICK T-connector DN15, DN25), 25 bar (with SICK T-connector DN40), 20 bar (with SICK T-connector DN50)Probe length: 60 mm
Flow sensors
T-Easic FTS, FTS-I060F14B
Wetted parts: Stainless steel 1.4404 (Ra ≤ 0,8 µm)
Process connection: Without process connection (adapter needed for installation)
Output signal: 2 push-pull digital outputs (Q1 configurable for IO-Link; Q2 configurable as analog output (4 … 20 mA) / pulse output / digital input) for flow and temperature
Process temperature: –40 °C ... +150 °C
Process pressure: –1 bar ... 100 bar, 40 bar (with SICK T-connector DN15, DN25), 25 bar (with SICK T-connector DN40), 20 bar (with SICK T-connector DN50)
Probe length: 60 mm
| Measurement principle | Calorimetric measurement process | ||||||||
| Medium | Water and oil-based liquids | ||||||||
| Pipe diameters | ≥ 25 mm 1) | ||||||||
| |||||||||
| Process temperature | –40 °C ... +150 °C 3) | ||||||||
| Process pressure | –1 bar ... 100 bar, 40 bar (with SICK T-connector DN15, DN25), 25 bar (with SICK T-connector DN40), 20 bar (with SICK T-connector DN50) 4) | ||||||||
| Communication interface | IO-Link, IO-Link V1.1, COM3 (230.4 kbit/s) | ||||||||
| Temperature measurement | ✔ | ||||||||
| Indication | ✔ OLED + 3 status LEDs | ||||||||
1) Place probe tip in the center of the pipe to ensure the highest measurement accuracy.
2) The measuring range limit value depends on the medium used.
3) At medium temperatures above 100 °C, the distance between the bottom of the housing and the top of the process connection adapter must be at least 25 mm. If a SICK process connection adapter is used, the 60 mm probe cannot be used at process temperatures above 100 °C because the distances cannot be maintained.
4) According to the Pressure Equipment Directive 2014/68 / EU: Good engineering practice, according to Article 13 for media of media group 2 (other substances).
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
