Safety fieldbox for PROFINET/PROFIsafeFor connection of up to 8 safety switching devicesIntegrated dual-port switch, IRT-capableProtection class IP67
| Product type description | SFB-PN-IRT-8M12-IOP-V2 |
| Article number (order number) | 103040357 |
| EAN (European Article Number) | 4030661561554 |
| eCl@ss number, version 12.0 | 27-24-26-04 |
| eCl@ss number, version 11.0 | 27-24-26-04 |
| eCl@ss number, version 9.0 | 27-24-26-04 |
| ETIM number, version 7.0 | EC001599 |
| ETIM number, version 6.0 | EC001599 |
| TÜV cULus UKCA |
| Standards | EN IEC 61131-1 EN IEC 61131-2 EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Housing material | Thermoplastic, Polyamide PA 6 GF |
| Material of the identification label | Plastic, Polyamide PA |
| Material of viewing window | Polyamide PACM 12 |
| Material of electronic encapsulation | Polyurethane 2K PU |
| Gross weight | 655 g |
| Integral system diagnostics, general | Yes |
| Safety classification |
| Standards | EN ISO 13849-1 EN IEC 61508 |
| Safety classification - Safety inputs 2-channels |
| Performance Level, up to | e |
| Category | 4 |
| Diagnostic Coverage (DC) Level | 99 % |
| PFH value | 1.10 x 10⁻⁹ /h |
| PFDavg | 9.60 x 10⁻⁵ |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Response time of local safety input ⇒ Fieldbus, maximum | 20 ms |
| Notice | The SFB fulfils the requirements as PDDB (proximity switch with defined behaviour under fault conditions) according to EN 60947-5-3 in combination with magnetic sensors (2 NC contacts) up to PL e / SIL 3. |
| Safety classification - Safety inputs 1-channel |
| Performance Level, up to | d |
| Category | 2 |
| Diagnostic Coverage (DC) Level | 90 % |
| PFH value | 2.30 x 10⁻⁷ /h |
| PFDavg | 2.00 x 10⁻² |
| Safety Integrity Level (SIL), suitable for applications in | 1 |
| Mission time | 20 Year(s) |
| Response time of local safety input > Fieldbus, maximum | 20 ms |
| Test interval for error detection | 10 s |
| Safety classification - Safety outputs 1-channel |
| Performance Level, up to | d |
| Category | 3 |
| Diagnostic Coverage (DC) Level | 90 % |
| PFH value | 1.00 x 10⁻⁷ /h |
| PFDavg | 8.80 x 10⁻³ |
| Safety Integrity Level (SIL), suitable for applications in | 2 |
| Mission time | 20 Year(s) |
| Reaction time Fieldbus > local safety output | 50 ms |
| Safety classification - Safety outputs 2-channels |
| Performance Level, up to | e |
| Category | 4 |
| Diagnostic Coverage (DC) Level | 99 % |
| PFH value | 1.20 x 10⁻⁹ /h |
| PFDavg | 1.10 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Notes (Safety Integrity Level) | This product must only be replaced in the application by an identical product of type SFB-PN-IRT-8M12-IOP-V2 with part no. 103040357. The older product version has a lower safety level. |
| Mission time | 20 Year(s) |
| Reaction time Fieldbus > local safety output | 50 ms |
| Mounting | Screws |
| Type of the fixing screws | 2x M6 |
| Tightening torque of the fixing screws, maximum | 3 Nm |
| Type of the fixing screws, viewing window | 2x TX10 (Torx) |
| Tightening torque of the fastening screws for the viewing window, maximum | 0.6 Nm |
| Termination | M12 Connector socket/connector |
| Terminal connector, Input/Output | X0 - X7: M12, 8-pole, A-coded |
| Terminal Connector, Power I/O | M12 POWER, 4-pole, T-coded |
| Terminal Connector, Field bus | M12, 4-pole, D-coded |
| Tightening torque of electrical connection, minimum | 0.8 Nm |
| Tightening torque of electrical connection, maximum | 1.5 Nm |
| Length | 222.8 mm |
| Width | 63 mm |
| Height | 36.1 mm |
| Degree of protection | IP66 IP67 |
| Ambient temperature | -25 ... +55 °C |
| Storage and transport temperature | -25 ... +70 °C |
| Relative humidity, minimum | 10 % |
| Relative humidity, maximum | 95 % |
| Note (Relative humidity) | non-condensing |
| Resistance to vibrations | 10 … 150 Hz, amplitude 0.35 mm / 5 g |
| Restistance to shock | 30 g / 11 ms |
| Protection class | III |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Operating voltage | 24 VDC -15 % / +10 % (stabilised PELV power supply) |
| Current consumption | 200 mA |
| Rated operating voltage | 24 VDC |
| Operating current | 10,000 mA |
| Note (Electrical data, Fuse rating) | External fuse protection required ≤ 10A slow blow when used to UL 61010. |
| Time to readiness, maximum | 8,000 ms |
| Device Watchdog Time | 10 ms |
| Device Acknowledgement Time, maximum | 25 ms |
| Reaction Time Safety Input, maximum | 20 ms |
| Reaction Time Safety Output, maximum | 50 ms |
| Feldbus Protokoll | PROFINET / PROFIsafe |
| Fieldbus specification | V2.3, Conformance Class C |
| Specification safety fieldbus | V2.4 |
| Fieldbus properties | Media Redundancy Protocol (MRP) Fast Start Up |
| Fieldbus network load class | 3 |
| Transfer rate | 100 Mbit/s Full Duplex |
| Adressing | Discovery and Configuration Protocol (DCP) |
| Integrated switch | Dual Port, 100 Mbit/s, IRT capable |
| Fieldbus services | I&M0 ... I&M3, SNMP, LLDP |
| Service interface | WEB-Interface HTTP |
| Bezeichnung, Geräteanschlüsse | X0 ... X7 |
| Cable length, device port | 30 m |
| Designation, Power supply | A1 and A2 |
| Rated operating voltage | 24 VDC |
| Rated operating current | 800 mA |
| Internal electrical fuse | 1.5 A (Integrated automatic resettable fuse) |
| Designation, Safety inputs | X1 and X2 |
| Switching thresholds | −3 V … 5 V (Low) 13 V ... 30 V (High) |
| Current consumption at 24 V | 6 mA |
| Permissible residual drive current | 1 mA |
| Test pulse duration, minimum | 0.01 ms |
| Test pulse duration, maximum | 1 ms |
| Test pulse interval, minimum | 20 ms |
| Test pulse interval, maximum | 120,000 ms |
| Classification ZVEI CB24I, Sink | C1 |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
| Designation, Safety outputs | DO |
| Design of control elements | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 2 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.8 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.8 A |
| Note, Utilisation category DC-13 | Inductive load, maximum 400 mH |
| Switching frequency, maximum | 1 Hz |
| Test pulse duration, maximum | 1 ms |
| Test pulse interval, minimum | 15 ms |
| Test pulse interval, maximum | 500 ms |
| Classification ZVEI CB24I, Source | C1 |
| Classification ZVEI CB24I, Sink | C1 |
| Designation, Diagnostic inputs / FB-Interface | DI |
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
| Current consumption at 24V | 12 mA |
| Input debounce filter | 10 ms |
| Data transfer rate FB-Interface | 19,2 kBaud |
| Designation, Test pulse outputs | Y1 and Y2 |
| Design of control elements | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 1 V |
| Current leakage Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Y1 rated current at 24 V | 15 mA |
| Y2 rated current at 24 V | 10 mA |
| Y2 rated current at 0 V | 30 mA |
| Test pulse interval, typical | 500 ms |
| Test pulse duration, maximum | 1 ms |
| Classification ZVEI CB24I, Sink | C1 |
| Classification ZVEI CB24I, Source | C1 |
| LED status | Error LED device port |
| LED position | E: 0 ... 7 |
| LED colour | green/red |
| LED status | Input LED device port |
| LED position | I: 0 ... 7 |
| LED colour | Yellow |
| LED status | LED Link Ethernet port |
| LED position | L: P1 + P2 |
| LED colour | Green |
| LED status | LED Activity Ethernet port |
| LED position | A: P1 + P2 |
| LED colour | Yellow |
| LED status | System fault LED |
| LED position | "SF": Module |
| LED colour | green/red |
| LED status | BUS fault LED |
| LED position | "BF": Module |
| LED colour | Red |
| LED status | Fieldbox error LED |
| LED position | "Err": Module |
| LED colour | green/red |
| LED status | Power-LED fieldbox |
| LED position | "Pwr": Module |
| LED colour | Green |
| Note (applications) | Safe field box with decentralised I/Os |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
