Individual coding with RFID technologyCoding level "High" according to ISO 141191 x connector plug M8Frontal and lateral actuation enabledThermoplastic enclosureSimple mounting without additional angleRFID-technology for needs-based protection against tampering
| Product type description | RSS260-I1-D-ST |
| Article number (order number) | 103003606 |
| EAN (European Article Number) | 4030661436425 |
| eCl@ss number, version 12.0 | 27-27-46-01 |
| eCl@ss number, version 11.0 | 27-27-24-03 |
| eCl@ss number, version 9.0 | 27-27-24-03 |
| ETIM number, version 7.0 | EC001829 |
| ETIM number, version 6.0 | EC001829 |
| TÜV cULus FCC IC UKCA ANATEL |
| Standards | EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Coding | Individual coding |
| Coding level according to EN ISO 14119 | High |
| Working principle | RFID |
| Frequency band RFID | 125 kHz |
| Transmitter output RFID, maximum | -6 dB/m |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Housing material | Plastic, thermoplastic, self-extinguishing |
| Active area | Glass-fibre, thermoplastic |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Reaction time, switching off safety outputs via actuator, maximum | 100 ms |
| Gross weight | 60 g |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral system diagnostics, status | Yes |
| Number of LEDs | 3 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of poles | 8 |
| Number of fail-safe digital outputs | 2 |
| Safety classification |
| Standards | EN ISO 13849-1 EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 6.80 x 10⁻¹⁰ /h |
| PFD value | 1.20 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Actuating panels | lateral front side |
| Active area | lateral front |
| Mounting | A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws. |
| Type of the fixing screws | 2x M4 |
| Tightening torque of the fixing screws, maximum | 0.8 Nm |
| Typical switching distance, frontal | 12 mm |
| Typical switching distance, lateral | 9 mm |
| Assured switching distance "ON", frontal | 10 mm |
| Assured switching distance "OFF", frontal | 18 mm |
| Assured switching distance "ON", lateral | 6 mm |
| Assured switching distance "OFF", lateral | 15 mm |
| Note (Sao) | The specifications of the safety switching distance Sao refer to a temperature range of |
| Note (switching distance) | Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Hysteresis (Switching distance), maximum | 2 mm |
| Repeat accuracy R | 0.5 mm |
| Note (Repeat accuracy R) | Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum clearance between two sensor systems 100 mm |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| Note (series-wiring) | Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD |
| Termination | Connector M8, 8-pole |
| Length of sensor | 29.5 mm |
| Width of sensor | 39.2 mm |
| Height of sensor | 18 mm |
| Degree of protection | IP65 IP67 |
| Ambient temperature | -28 ... +65 °C |
| Storage and transport temperature | -28 ... +85 °C |
| Relative humidity, maximum | 93 % |
| Note (Relative humidity) | non-condensing non-icing |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Operating voltage | 24 VDC -15 % / +10 % (stabilised PELV power supply) |
| Operating current, minimum | 0.5 mA |
| No-load supply current I0, typical | 35 mA |
| Rated operating voltage | 24 VDC |
| Operating current | 600 mA |
| Required rated short-circuit current | 100 A |
| Time to readiness, maximum | 2,000 ms |
| Switching frequency, maximum | 1 Hz |
| Utilisation category DC-12 | 24 VDC / 0.05 A |
| Electrical fuse rating, maximum | 2 A |
| Designation, Safety inputs | X1 and X2 |
| Current consumption of the safety inputs | 5 mA |
| Test pulse duration, maximum | 1 ms |
| Test pulse interval, minimum | 100 ms |
| Classification ZVEI CB24I, Sink | C1 |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
| Designation, Safety outputs | Y1 and Y2 |
| Rated operating current (safety outputs) | 250 mA |
| Output current, (fail-safe output), maximum | 0.25 A |
| Design of control elements | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 1 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A |
| Test pulse interval, typical | 1000 ms |
| Test pulse duration, maximum | 1 ms |
| Classification ZVEI CB24I, Source | C2 |
| Classification ZVEI CB24I, Sink | C1 C2 |
| Designation, Diagnostic outputs | OUT |
| Operating current | 50 mA |
| Voltage drop Ud, maximum | 2 V |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.05 A |
| Interfering radiation | IEC 61000-6-4 |
| Note (LED switching conditions display) | (1) LED green: Supply voltage LED yellow: Operating condition LED red: Fault |
| PIN 1 | A1 Ue: White |
| PIN 2 | X1 safety input 1: Brown |
| PIN 3 | A2 GND: Green |
| PIN 4 | Y1 safety output 1: Yellow |
| PIN 5 | OUT Diagnostic output OUT Grey |
| PIN 6 | X2 safety input 2: Pink |
| PIN 7 | Y2 safety output 2: Blue |
| PIN 8 | IN without function: Red |
| Scope of delivery | Actuator must be ordered separately. |
| Recommendation (actuator) | RST16-1 RST-U-2 RST260-1 |
| Recommended safety switchgear | PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
