Connector M23, 8+1-poleIdle assignable pushbutton and LEDThermoplastic enclosureMax. length of the sensor chain 200 mSelf-monitoring series-wiring3 LEDs to show operating conditionsSensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontallyIntelligent diagnosis
Note (Delivery capacity) | Not available! |
Product type description | MS-AZ 200ST-T-1P2P-2568 |
Article number (order number) | 103006853 |
EAN (European Article Number) | 4030661443409 |
eCl@ss number, version 12.0 | 27-27-26-02 |
eCl@ss number, version 11.0 | 27-27-26-02 |
eCl@ss number, version 9.0 | 27-27-26-02 |
ETIM number, version 7.0 | EC002592 |
ETIM number, version 6.0 | EC002592 |
Standards | EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
Working principle | Non-contact |
Housing material | Glass-fibre, reinforced thermoplastic |
Reaction time, maximum | 60 ms |
Duration of risk, maximum | 120 ms |
Gross weight | 513 g |
Actuator monitored | Yes |
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Series-wiring | Yes |
Idle assignable pushbutton | Yes |
Freely assignable LED | Yes |
Safety functions | Yes |
Integral system diagnostics, status | Yes |
Number of safety contacts | 2 |
Safety classification |
Standards | EN IEC 61508 |
Performance Level, up to | e |
Category | 4 |
PFH value | 4.00 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in | 3 |
Mission time | 20 Year(s) |
Mechanical life, minimum | 1,000,000 Operations |
Latching force | 30 N |
Actuating speed, maximum | 0.2 m/s |
Tightening torque of the fastening screws for the housing cover, minimum | 0.7 Nm |
Tightening torque of the fastening screws for the housing cover, maximum | 1 Nm |
Note | Torx T10 |
Switch distance, typical | 6.5 mm |
Assured switching distance "ON" Sao | 4 mm |
Assured switching distance "OFF" Sar | 30 mm |
Hysteresis (Switching distance), maximum | 1.5 mm |
Repeat accuracy R | 0.5 mm |
Termination | Connector M23, 12-pole |
Length of sensor | 50 mm |
Width of sensor | 40 mm |
Height of sensor | 220 mm |
Degree of protection | IP67 |
Ambient temperature | -25 ... +70 °C |
Storage and transport temperature | -25 ... +85 °C |
Relative humidity, minimum | 30 % |
Relative humidity, maximum | 95 % |
Note (Relative humidity) | non-condensing |
Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Protection class | II |
Rated insulation voltage Ui | 32 VDC |
Rated impulse withstand voltage Uimp | 0.8 kV |
Overvoltage category | III |
Degree of pollution | 3 |
Operating voltage | 24 VDC -15 % / +10 % |
No-load supply current I0, typical | 100 mA |
Rated operating voltage | 24 VDC |
Operating current | 50 mA |
Time to readiness, maximum | 4,000 ms |
Switching frequency, approx. | 1 Hz |
Electrical fuse rating, maximum | 4 A |
Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
Current consumption at 24 V | 5 mA |
Rated operating current (safety outputs) | 250 mA |
Design of control elements | p-type |
Voltage drop Ud, maximum | 4 V |
Leakage current Ir, maximum | 0.5 mA |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.25 A |
Design of control elements | p-type |
Voltage drop Ud, maximum | 4 V |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.05 A |
Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage: LED green |
PIN 1 | A1 Supply voltage UB |
PIN 2 | X1 Safety input 1 |
PIN 3 | A2 GND |
PIN 4 | Y1 Safety output 1 |
PIN 5 | OUT Diagnostic output |
PIN 6 | X2 Safety input 2 |
PIN 7 | Y2 Safety output 2 |
PIN 9 | without function |
Scope of delivery | Actuator must be ordered separately. |
Recommendation (actuator) | AZ/AZM 200-B1 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.