IDC method of terminationManual releaseExplosion protection for ATEX Zones 2 and 22Thermoplastic enclosure1 Cable entry M 20 x 1.5Interlock with protection against incorrect locking.High holding force90 mm x 84 mm x 30 mm
| Article number (order number) | 103049509 |
| EAN (European Article Number) | 4030661624891 |
| Explosion protection: regulations | EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
| Explosion protection zones | 2 22 |
| Explosion protection category | 3G 3D |
| Explosion protection designation | D II 3G Ex nC IIB T5 Gc X D II 3D Ex tc IIIC T80°C Dc X |
Manufacturer declaration | ATEX Zone 2 and 22 |
| Standards | EN IEC 60947-5-1 |
| Working principle | electromechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Power to unlock | Yes |
| Manual release | Yes |
| Number of safety contacts | 2 |
| Safety classification |
| Standards | EN ISO 13849-1 |
| Performance Level, up to | c |
| Category | 1 |
| B10D Normally-closed contact (NC) | 2,000,000 Operations |
| Note | Electrical life on request. |
| B10D Normally-open contact (NO) | 1,000,000 Operations |
| Mission time | 20 Year(s) |
| Safety classification - Fault exclusion |
| Performance Level, up to | d |
| Category | 3 |
| Note | for 2-channel use and with suitable logic unit. |
| Mission time | 20 Year(s) |
| Mechanical life, minimum | 1,000,000 Operations |
| Impact energy, maximum | 7 J |
| Holding force | 1,000 N |
| Latching force | 30 N |
| Positive break travel | 11 mm |
| Positive break force, minimum | 17 N |
| Actuating speed, maximum | 1 m/s |
| Mounting | Screws |
| Type of the screw head | Flat head screw |
| Tightening torque of the fastening screws for the housing cover, minimum | 0.4 Nm |
| Tightening torque of the fastening screws for the housing cover, maximum | 0.5 Nm |
| Tightening torque of the cable gland | 4.5 Nm |
| Termination | IDC method of termination |
| Cable cross-section of the cable glands, minimum | 6.5 mm |
| Cable cross-section of the cable glands, maximum | 12 mm |
| Cable section, minimum | 2 x 1.0 mm², flexible |
| Cable section, maximum | 1 x 1 mm², flexible |
| Length of sensor | 30 mm |
| Width of sensor | 90 mm |
| Height of sensor | 84 mm |
| Degree of protection | IP67 |
| Ambient temperature | -15 ... +45 °C |
| Note (Relative humidity) | non-condensing non-icing |
| Rated insulation voltage Ui | 250 VAC |
| Rated impulse withstand voltage Uimp | 4 kV |
| Thermal test current | 2 A |
| Rated control voltage | 24 VAC |
| Rated control voltage | 24 VDC |
| Utilisation category AC-15 | 230 VAC |
| Utilisation category AC-15 | 2 A |
| Utilisation category DC-13 | 24 VDC |
| Utilisation category DC-13 | 2 A |
| Electrical power consumption, maximum | 10 W |
| Switching element | Opener (NC) |
| Switching principle | Slow action |
| Maximum switching frequency | 1,000 /h |
| Material of the contacts, electrical | Silver |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms |
| Test pulse interval, minimum | 50 ms |
| Scope of delivery | Actuator must be ordered separately. Including Ex-certified screwed cable gland and screw plug |
| Note (General) | This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules |
| Note (Manual release) | bottom For manual release using M5 triangular key, available as accessory |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
