Screw connectionEx-Zone 22Thermoplastic enclosure130 mm x 90 mm x 30 mmClamping force 2000N6 ContactsManual releaseInterlock with protection against incorrect locking.cable entries 4 M 16 x 1.5
| Product type description | EX-AZM 161SK-12/12RK-024 -3D |
| Article number (order number) | 101185420 |
| EAN (European Article Number) | 4030661324982 |
| eCl@ss number, version 12.0 | 27-27-26-03 |
| eCl@ss number, version 11.0 | 27-27-26-03 |
| eCl@ss number, version 9.0 | 27-27-26-03 |
| ETIM number, version 7.0 | EC002593 |
| ETIM number, version 6.0 | EC002593 |
| Explosion protection: regulations | EN IEC 60079-0 EN 60079-31 |
| Explosion protection zones | 22 |
| Explosion protection category | 3D |
| Explosion protection designation | D II 3D Ex tc IIIC T80°C Dc X |
| Standards | EN IEC 60947-5-1 |
| Working principle | electromechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 470 g |
| Power to unlock | Yes |
| Manual release | Yes |
| Number of actuating directions | 3 |
| Number of auxiliary contacts | 2 |
| Number of safety contacts | 4 |
| Safety classification |
| Standards | EN ISO 13849-1 |
| Performance Level, up to | c |
| Category | 1 |
| B10D Normally-closed contact (NC) | 2,000,000 Operations |
| Note | Electrical life on request. |
| B10D Normally-open contact (NO) | 1,000,000 Operations |
| Mission time | 20 Year(s) |
| Safety classification - Fault exclusion |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to | d |
| Category | 3 |
| Note | for 2-channel use and with suitable logic unit. |
| Mission time | 20 Year(s) |
| Mechanical life, minimum | 1,000,000 Operations |
| Actuating play in direction of actuation | 5.5 mm |
| Impact energy, maximum | 1 J |
| Energy impact (protective case), maximum | 7 J |
| Latching force | 30 N |
| Positive break travel | 10 mm |
| Positive break force, minimum | 20 N |
| Actuating speed, maximum | 1 m/s |
| Mounting | Screws |
| Type of the fixing screws | 3x M6 |
| Type of the screw head | Flat head screw |
| Tightening torque of the fastening screws for the housing cover | 0.6 Nm |
| Tightening torque of the fastening screws for the housing cover, minimum | 0.6 Nm |
| Note | The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. |
| Tightening torque of the cable gland | 3 Nm |
| Termination | Screw terminals |
| Cable cross-section of the cable glands, minimum | 5 mm |
| Cable cross-section of the cable glands, maximum | 10 mm |
| Cable section, minimum | 1 x 0.75 mm² |
| Cable section, maximum | 1 x 1.5 mm² |
| Note | All indications including the conductor ferrules. |
| Length | 30 mm |
| Width | 130 mm |
| Height | 90 mm |
| Degree of protection | IP67 |
| Ambient temperature | -10 ... +50 °C |
| Note (Relative humidity) | non-condensing non-icing |
| Rated insulation voltage Ui | 250 VAC |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated control voltage | 24 VAC |
| Rated control voltage | 24 VDC |
| Utilisation category DC-13 | 24 VDC |
| Utilisation category DC-13 | 2.5 A |
| Electrical power consumption, maximum | 10 W |
| Switching element | NO contact, NC contact |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 1,000 /h |
| Material of the contacts, electrical | Silver |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms |
| Test pulse interval, minimum | 50 ms |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 2.5 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 2.5 A |
| Scope of delivery | Actuator must be ordered separately. Including Ex-certified screwed cable gland and screw plug |
| Note (Manual release) | For maintenance, installation, etc. For manual release using M5 triangular key, available as accessory |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
