Connector M12, 4-poleNOTICE: Not available! (Replacement: RSS16)Thermoplastic enclosureElectronic contact-free, coded systemMisaligned actuation possible55 mm x 93 mm x 39.5 mmHigh repeat accuracy of the switching pointsMax. length of the sensor chain 200 mEarly warning when operating near the limit of the sensor´s hysteris rangeSelf-monitoring series-wiring of 16 sensors2 short-circuit proof PNP safety outputs
| Note (Delivery capacity) | Not available! |
| Product type description | CSS 8-16-2P-E-LST |
| Article number (order number) | 101210575 |
| EAN (European Article Number) | 4030661388915 |
| eCl@ss number, version 12.0 | 27-27-46-01 |
| eCl@ss number, version 11.0 | 27-27-24-03 |
| eCl@ss number, version 9.0 | 27-27-24-03 |
| ETIM number, version 7.0 | EC001829 |
| ETIM number, version 6.0 | EC001829 |
| cULus |
| Standards | EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | inductive |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Individual sensor or end sensor in a series |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Reaction time, maximum | 30 ms |
| Duration of risk, maximum | 30 ms |
| Gross weight | 285 g |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Safety functions | Yes |
| Integral system diagnostics, status | Yes |
| Number of fail-safe digital outputs | 2 |
| Number of series-wiring of sensors | 16 |
| Safety classification |
| Standards | EN IEC 60947-5-3 EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 2.50 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Switch distance, typical | 8 mm |
| Assured switching distance "ON" Sao | 6 mm |
| Assured switching distance "OFF" Sar | 11 mm |
| Hysteresis (Switching distance), maximum | 1 mm |
| Repeat accuracy R | 0.5 mm |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| Length of cable | 2 m |
| Termination | Cable with connector |
| Terminal connector, Output | M12 connector, 4 pole |
| Length of sensor | 39.5 mm |
| Width of sensor | 55 mm |
| Height of sensor | 93 mm |
| Degree of protection | IP65 IP67 |
| Ambient temperature | -25 ... +55 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | II |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Operating voltage | 24 VDC -15 % / +10 % |
| No-load supply current I0, typical | 50 mA |
| Rated operating voltage | 24 VDC |
| Operating current | 1,100 mA 500 mA |
| Switching frequency, approx. | 3 Hz |
| Output current, (fail-safe output), maximum | 0.5 A |
| Design of control elements | p-type |
| Voltage drop Ud, maximum | 0.5 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.5 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.5 A |
| Design of control elements | p-type |
| Voltage drop Ud, maximum | 4 V |
| Interfering radiation | IEC 61000-6-4 |
| EMC rating | IEC 61000-6-2 |
| Note (LED switching conditions display) | Multi-coloured LED: Green, Red, Yellow |
| PIN 1 | 1A1 Ue: (1) |
| PIN 2 | Y2 Safety output 2 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| Scope of delivery | Actuator must be ordered separately. |
| Recommendation (actuator) | CST 16-1 |
| Recommended safety switchgear | PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
| Note (General) | Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.25 ms. Short-circuit recognition by the evaluation is not necessary. |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
