Actuation from sidewith bias magnetNon-contact principleLong lifeThermoplastic enclosureActuating distance up to 60 mm depending on actuating magnet and versionDesign Ø 10.7 mmwith central mountingWith pre-wired cable
| Product type description | BN 120-RZ |
| Article number (order number) | 101186843 |
| EAN (European Article Number) | 4030661335421 |
| eCl@ss number, version 12.0 | 27-27-43-02 |
| eCl@ss number, version 11.0 | 27-27-01-05 |
| eCl@ss number, version 9.0 | 27-27-01-05 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
| Working principle | Magnetic drive |
| Housing construction form | Cylinder, thread |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 30 g |
| Latching | Yes |
| Suitable for elevators | Yes |
| bias magnet | Yes |
| Number of snap-in contacts | 1 |
| Actuating panels | lateral |
| Actuating element | Magnet |
| Mechanical life, minimum | 10,000,000 Operations |
| Actuating speed, maximum | 18 m/s |
| Mounting | central with threated flange M12 x 1 |
| Tightening torque of nuts, maximum | 0.9 Nm |
| Switching distance Sn | 15 mm … 60 mm BP 10N = 15 mm BP 10S = 15 mm 2 x BP 10N = 20 mm 2 x BP 10S = 20 mm BP 15N = 17 mm BP 15S = 17 mm 2 x BP 15/2N = 22 mm 2 x BP 15/2S = 22 mm BP 34N = 10 ... 30 mm BP 34S = 15 ... 30 mm BP 20N = 25 mm BP 20S = 25 mm BP 31N = 25 mm BP 31S = 25 mm BP 11N = 15 mm BP 11S = 15 mm 2 x BP 11N = 25 mm 2 x BP 11S = 25 mm BP 12N = 20 mm BP 12S = 20 mm 2 x BP 12N = 10 ... 30 mm 2 x BP 12S = 10 ... 30 mm BP 21N = 15 ... 45 mm BP 21S = 15 ... 45 mm 2 x BP 21N = 20 ... 60 mm 2 x BP 21S = 20 ... 60 mm BE 20N = 20 mm BE 20S = 20 mm |
| Note (Switching distance Sn) | Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Repeat accuracy R | 0.3 mm |
| Length of cable | 1 m |
| Termination | Cable |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
| Material of the Cable mantle | LiYY |
| Diameter of sensor | 10.7 mm |
| Length of sensor | 71 mm |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +70 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Switching voltage, maximum | 200 VAC |
| Switching current, maximum | 1 A |
| Switching capacity, maximum | 30 W |
| Switching capacity, maximum | 30 VA |
| Switching element | bistable contact |
| Bounce duration, maximum | 0.2 ms |
| Switching frequency, maximum | 300 Hz |
| Design of control elements | Reed contacts |
| Scope of delivery | Actuator must be ordered separately. |
| Recommendation (actuator) | BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S BP 21 S 2x BP 21 S BE 20 S BP 10 N 2x BP 10 N BP 15 N 2 x BP 15/2 N 2x BP 15/2 S BP 34 N BP 20 N BP 31 N BP 11 N 2x BP 11 N BP 12 N 2x BP 12 N 2x BP 12 S BP 21 N 2x BP 21 N BE 20 N |
| Recommendation (actuator, lift switchgear) | BP 10 2 x BP 15/2 2 x BP 15 2 x BP 10 BP 15 BP 34 |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
