Integrated AS-Interfacewith connector plug M12 bottomPos 1: E-STOPPos 2: Key selector switch, 2 positionsPos 3: illuminated pushbutton 2875 with changeable colorsPos 4: illuminated pushbutton 2875 with changeable colorsslender shock-proof thermoplastic enclosureto be installed at an ergonomic favourable positionto be fitted to commercial-off-the-shelf aluminium profiles
| Product type description | BDF200-ST1-AS-NH-SWT20-LT-LT-2875 |
| Article number (order number) | 103039749 |
| EAN (European Article Number) | 4030661551531 |
| eCl@ss number, version 12.0 | 27-37-12-16 |
| eCl@ss number, version 11.0 | 27-37-12-16 |
| eCl@ss number, version 9.0 | 27-37-12-16 |
| ETIM number, version 7.0 | EC000225 |
| ETIM number, version 6.0 | EC000225 |
| Note (Ordering data) | Notice: see ordering code |
| cULus ASi-SaW |
| Standards | EN IEC 62026-2 EN ISO 13849-1 EN ISO 13850 EN IEC 60947-5-1 EN IEC 61508 |
| Climatic stress | DIN EN 60068 |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Reaction time, maximum | 100 ms |
| Positions used, position 1 | Emergency stop pushbutton |
| Positions used, position 2 | Key selector switch spring return 2 positions |
| Positions used, position 3 | Illuminated pushbutton; color exchangeable |
| Positions used, position 4 | Illuminated pushbutton, color exchangeable |
| Gross weight | 280 g |
| Indicator lamp | No |
| Safety classification |
| Standards | EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 1.40 x 10⁻⁸ /h |
| Note (PFH-value) | up to max. 5,000 switching cycles/year |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Mechanical life, Emergency-Stop button | 100,000 Operations |
| Mechanical life, Command devices | 1,000,000 Operations |
| Mounting | interior mounting holes |
| Type of the fixing screws | 2x M5 |
| Termination | Connector plug M12, 4-pole, (A-coding) |
| Width | 40 mm |
| Height | 69 mm |
| Depth | 233.5 mm |
| Degree of protection | IP65 |
| Ambient temperature | -25 ... +65 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Resistance to vibrations | 10 … 150 Hz, amplitude 0.35 mm / 5 g |
| Restistance to shock | 15 g / 11 ms |
| Protection class | II |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated operating voltage | 18 ... 31.6 VDC (Protection against polarity reversal) |
| AS-i Current consumption, maximum | 150 mA |
| Note (AS-i Parameter bits) | Set the parameter outputs to "1111" (0xF) FID: periphery error |
| AS-i Version (Safety-Slave) | V 3.0 |
| AS-i Profile (Safety-Slave) | S-7.B.F.F |
| AS-i Input, Channel 1 (Safety-Slave) | Data bits DI 0 / DI 1 = dynamic code transmission |
| AS-i Input, Channel 2 (Safety-Slave) | Data bits DI 2 / DI 3 = dynamic code transmission |
| AS-i Output, DO 0 (Safety-Slave) | Indicator lamp G24 red |
| AS-i Output, DO 1 (Safety-Slave) | Indicator lamp G24 green |
| AS-i Output, DO 2 (Safety-Slave) | No Function |
| AS-i Output, DO 3 (Safety-Slave) | No Function |
| AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3 | No function |
| AS-i Version (A/B Slave) | V 3.0 |
| AS-i Profile (A/B Slave) | S-7.A.7.F |
| AS-i Input, DI 0 (A/B Slave) | Command device Position 4 |
| AS-i Input, DI 1 (A/B Slave) | Command device Position 3 |
| AS-i Input, DI 2 (A/B Slave) | Command device Position 2 |
| AS-i Input, DI 3 (A/B Slave) | Command device Position 2 |
| AS-i Output, DO 0 (A/B Slave) | Illuminated signal position 4 |
| AS-i Output, DO 2 (A/B Slave) | Illuminated signal position 2 |
| AS-i Output, DO 1 (A/B Slave) | Illuminated signal position 3 |
| AS-i Output, DO 3 (A/B Slave) | No Function |
| AS-i AS-i Parameter bits (A/B Slave), P0 ... P3 | No function |
| AS-i Input module address | 0 |
| Note (AS-i Input module address) | Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
| Note | Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector. |
| PIN 1 | AS-Interface + |
| PIN 2 | n.c. |
| PIN 3 | AS-Interface - |
| PIN 4 | n.c. |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
