connector, can be rotatedThermoplastic enclosureDouble-insulatedCompact designInterlock with protection against incorrect locking.Long lifeHigh holding force
| Note (Delivery capacity) | Not available! |
| Product type description | AZM 170ST-11/11ZKA 24VAC/DC |
| Article number (order number) | 101186184 |
| EAN (European Article Number) | 4030661562315 |
| eCl@ss number, version 12.0 | 27-27-26-03 |
| eCl@ss number, version 11.0 | 27-27-26-03 |
| eCl@ss number, version 9.0 | 27-27-26-03 |
| ETIM number, version 7.0 | EC002593 |
| ETIM number, version 6.0 | EC002593 |
| IFA cULus CCC |
| Standards | EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | electromechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Power to lock | Yes |
| Number of actuating directions | 2 |
| Number of auxiliary contacts | 2 |
| Number of safety contacts | 2 |
| Safety classification |
| Standards | EN ISO 13849-1 |
| Performance Level, up to | c |
| Category | 1 |
| B10D Normally-closed contact (NC) | 2,000,000 Operations |
| Note | Electrical life on request. |
| B10D Normally-open contact (NO) | 1,000,000 Operations |
| Note | at 10% Ie and ohmic load |
| Mission time | 20 Year(s) |
| Note (B10D Normally open contact (NO)) | at 10% Ie and ohmic load |
| Safety classification - Fault exclusion |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to | d |
| Category | 3 |
| Note | for 2-channel use and with suitable logic unit. |
| Mission time | 20 Year(s) |
| Mechanical life, minimum | 1,000,000 Operations |
| Holding force FZh in accordance with EN ISO 14119 | 1,000 N |
| Holding force Fmax, maximum | 1,300 N |
| Latching force | 5 N |
| Positive break travel | 11 mm |
| Positive break force per NC contact, minimum | 8.5 N |
| Positive break force, minimum | 17 N |
| Actuating speed, maximum | 2 m/s |
| Mounting | Screws |
| Type of the fixing screws | 2x M5 |
| Tightening torque of the fastening screws for the housing cover, minimum | 0.7 Nm |
| Tightening torque of the fastening screws for the housing cover, maximum | 1 Nm |
| Note | Torx T10 |
| Termination | Connector plug M12, 4-pole, (A-coding) Connector plug M12, 8-pole, (A-coding) Connector plug M12, 4-pole, (B-coding) |
| Length of sensor | 30 mm |
| Width of sensor | 90 mm |
| Height of sensor | 92.5 mm |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +60 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Note (Relative humidity) | non-condensing non-icing |
| Protection class | II |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 60 V |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Thermal test current | 2 A |
| Rated control voltage | 24 VAC/DC |
| Required rated short-circuit current | 1,000 A |
| Electrical power consumption, maximum | 12 W |
| Switching element | Magnet: 1 NO contact, 1 NC contact / Actuator: 1 NO contact, 1 NC contact |
| Note (Switching element) | Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 1,000 /h |
| Material of the contacts, electrical | Silver |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms |
| Test pulse interval, minimum | 50 ms |
| Current, Utilisation category AC-15 | 4 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 2 A |
| Current, Utilisation category AC-15 | 4 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 2 A |
| Note (applications) | sliding safety guard removable guard hinged safety guard |
| Scope of delivery | Actuator must be ordered separately. Slot sealing plugs |
| Note (Manual release) | For manual release using M5 triangular key, available as accessory |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
