Input module with M12 connectorFor sensors with NC / NO combinationSensor connection, Pre-wired cable 2 mSolenoid supply 24 VDC (Aux)Magnetic drive through AS-Interface outputAS-i connection, connector plug M12, 6-poleNOTICE: Not available!Input module for 2 safe inputs for mechanical contactsThermoplastic enclosureAS-Interface LED and status display86,5 mm x 28 mm x 28 mmLong lifeIntegrated AS-Interface
| Note (Delivery capacity) | Not available! |
| Product type description | AST11 ST-AS6 |
| Article number (order number) | 101176304 |
| EAN (European Article Number) | 4030661308838 |
| eCl@ss number, version 12.0 | 27-24-26-04 |
| eCl@ss number, version 11.0 | 27-24-26-04 |
| eCl@ss number, version 9.0 | 27-24-26-04 |
| ETIM number, version 7.0 | EC001599 |
| ETIM number, version 6.0 | EC001599 |
| cULus |
| Standards | EN 50295 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 61508 |
| Connector (electric) | Sensor connection: pre-wired cable 6-pole AS-i connection: connector plug M12, 4-pole |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 120 g |
| Cross-circuit detection | Yes |
| Integral system diagnostics, status | Yes |
| Number of inputs for NC | 1 |
| Number of inputs for NO | 1 |
| Number of pre-wired cable | 1 |
| Safety classification |
| Standards | EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 2.04 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Length of cable | 2 m |
| Termination | 1 NO contacts/1 NC contact |
| Wire cross-section | 0.23 mm2 |
| Wire cross-section | 23 AWG |
| Diameter of sensor | 28 mm |
| Height of sensor | 86.5 mm |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +55 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Relative humidity, minimum | 30 % |
| Relative humidity, maximum | 95 % |
| Note (Relative humidity) | non-condensing |
| Protection class | II |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Current consumption | 50 mA |
| Current consumption, maximum | 500 mA |
| Rated operating voltage | 26.5 ... 31.6 VDC (Protection against polarity reversal) |
| AS-i Version | V 2.1 |
| AS-i Profile | S-7.B.F.E |
| AS-i, IO-Code | 0x7 |
| AS-i, ID-Code | 0xB |
| AS-i, ID-Code1 | 0xF |
| AS-i, ID-Code2 | 0xE |
| AS-i Input, Channel 1 | Data bits DI 0 / DI 1 = dynamic code transmission |
| AS-i Input, Channel 2 | Data bits DI 2 / DI 3 = dynamic code transmission |
| AS-i Outputs, DO 0 | Solenoid control |
| AS-i Outputs, DO 1 | No Function |
| AS-i Outputs, DO 2 | No Function |
| AS-i Outputs, DO 3 | No Function |
| AS-i Parameter bits, P0 ... P3 | No function |
| Note (AS-i Parameter bits) | Set the parameter outputs to "1111" (0xF) FID: periphery error |
| AS-i Input module address | 0 |
| Note (AS-i Input module address) | Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
| Note (LED switching conditions display) | (1) LED green: Supply voltage (2) LED red: Communication error (3) LED yellow : Enabling status |
| Connection | AS-i connection |
| PIN 1 | AS-i + |
| PIN 2 | (Aux -) |
| PIN 3 | AS-Interface - |
| PIN 4 | (Aux +) |
| Connection | Sensor connection |
| PIN 1 | Brown - Normally open contact (NO) |
| PIN 2 | Blue - Normally open contact (NO) |
| PIN 3 | White - Opener (NC) |
| PIN 4 | Black - Opener (NC) |
| PIN 5 | Red - Magnet (+) AUS |
| PIN 6 | Grey - Solenoid GND |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
