AS-i connection, connector plug M12, 4-poleNOTICE: Not available!Input module for 2 monitored PNP semiconductor outputs for safety light curtains and light gridsThermoplastic enclosureAS-Interface LED and status display86,5 mm x 28 mm x 28 mmLong lifeIntegrated AS-Interface
| Note (Delivery capacity) | Not available! |
| Product type description | AST LC ST-AS |
| Article number (order number) | 101182561 |
| EAN (European Article Number) | 4030661317649 |
| eCl@ss number, version 12.0 | 27-24-26-04 |
| eCl@ss number, version 11.0 | 27-24-26-04 |
| eCl@ss number, version 9.0 | 27-24-26-04 |
| ETIM number, version 7.0 | EC001599 |
| ETIM number, version 6.0 | EC001599 |
| cULus |
| Standards | EN 50295 EN ISO 13849-1 EN IEC 61508 EN IEC 61496-1 |
| Connector (electric) | AS-i connection: connector plug M12, 4-pole |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Reaction time, maximum | 20 ms |
| Gross weight | 185 g |
| Cross-circuit detection | Yes |
| Integral system diagnostics, status | Yes |
| Number of pre-wired cable | 2 |
| Safety classification |
| Standards | EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 1.74 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Diameter of sensor | 28 mm |
| Height of sensor | 86.5 mm |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +60 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Relative humidity, minimum | 30 % |
| Relative humidity, maximum | 95 % |
| Note (Relative humidity) | non-condensing |
| Protection class | II |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Current consumption | 50 mA |
| Rated operating voltage | 26.5 ... 31.6 VDC (Protection against polarity reversal) |
| AS-i Version | V 2.1 |
| AS-i Profile | S-0.B.F.E |
| AS-i, IO-Code | 0x7 |
| AS-i, ID-Code | 0xB |
| AS-i, ID-Code1 | 0xF |
| AS-i, ID-Code2 | 0xE |
| AS-i Input, Channel 1 | Data bits DI 0 / DI 1 = dynamic code transmission |
| AS-i Input, Channel 2 | Data bits DI 2 / DI 3 = dynamic code transmission |
| AS-i Outputs, DO 0 … DO 3 | No Function |
| AS-i Parameter bits, P0 ... P3 | No function |
| AS-i Parameter bits, P3 | Authorised operation canal 1 + 2 |
| Note (AS-i Parameter bits) | Set the parameter outputs to "1111" (0xF) |
| AS-i Input module address | 0 |
| Note (AS-i Input module address) | Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
| Note (LED switching conditions display) | (1) LED green: Supply voltage (2) LED red: Communication error (3) LED yellow: Enabling status OSSD 1/2 |
| Connection | ST1 male connector / power supply for Safety light grids and curtains |
| PIN 1 | 24 VDC |
| PIN 2 | n.c. |
| PIN 3 | GND |
| PIN 4 | n.c. |
| PIN 5 | FE (functional earth connection) |
| Connection | ST2 female connector / Safety light grids and curtains |
| PIN 1 | + 24 VDC |
| PIN 2 | OSSD 1 |
| PIN 3 | GND |
| PIN 4 | OSSD 2 |
| PIN 5 | FE (functional earth connection) |
| Note (Wiring diagram) | The Opto-Tube is directly connected to the receiver module (ST2). The receiver module is supplied with 24 V DC via the connector (ST1). The Opto-Tube itself is connected via the M12 connector (ST) to the AS-i network. Before hand the module has to be programmed with an individual address (1 - 31). The emitter module has to be wired up separately Please observe the corresponding SLC/SLG documentation (test signal). The wiring diagram shows an active optoelectronic device (AOPD) (type SLC/SLG 420) with a safety input module AST LC ST-AS (Opto-Tube) connected to the AS-i Safety at Work system. |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
